[sip-comm] Sip-communicator usage


#1

Hi,

I run the program successfully. With it, I could call another party on my
network (with the ringing sound). After I answered the call, I tried to send
a voice to another party but it doesn't work. I don't know how to do it, can
you tell me how? What I tried is to use my computer microphone and say
something, nothing happen at another end speaker.

best regards,
Thone

···

________________________________________________
Message sent using FreeInternet Mail system 2.7.2

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: users-help@sip-communicator.dev.java.net


#2

Hello Thone,

Which version of sip-communicator are you running - the binary package
or the CVS version?
Do you have JMF installed?

Are there any error messages popping out at the console? (Attaching a
copy of the console output would be nice ... )

Cheers
Emil

Hi,

I run the program successfully. With it, I could call another party on my
network (with the ringing sound). After I answered the call, I tried to send
a voice to another party but it doesn't work. I don't know how to do it, can
you tell me how? What I tried is to use my computer microphone and say
something, nothing happen at another end speaker.

best regards,
Thone

________________________________________________
Message sent using FreeInternet Mail system 2.7.2

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: users-help@sip-communicator.dev.java.net

Cheers
Emil

http://www.emcho.com

···

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: users-help@sip-communicator.dev.java.net


#3

Hi,
   I downloaded the binary one yesterday. I have JMF installed. I could
see no error in the console (as I roughly look though). But I don't know
that what I'm doing is correct or not. First, I run sip-communication,
and there was a pop-up warning that I don't have properties file so I
copied it from the source (on the web site) and configure IP Address (it
default to be root@127.0.0.1 so I change it to be root@192.168.0.39 as
of eth0). Then I made a call. The ringing sound occurred on both
computer, I clicked answer button and try to speak on my microphone. I
run sip-communication on, a linux and windowsXP. Thank you for your
help.

Thone.

···

-----Original Message-----
From: Emil Ivov [mailto:emil_ivov@yahoo.com]
Sent: Friday, July 11, 2003 5:47 AM
To: Thonelix
Cc: users@sip-communicator.dev.java.net
Subject: Re: [sip-comm] Sip-communicator usage

Hello Thone,

Which version of sip-communicator are you running - the binary package
or the CVS version?
Do you have JMF installed?

Are there any error messages popping out at the console? (Attaching a
copy of the console output would be nice ... )

Cheers
Emil

Hi,

I run the program successfully. With it, I could call another party on

my

network (with the ringing sound). After I answered the call, I tried

to send

a voice to another party but it doesn't work. I don't know how to do

it, can

you tell me how? What I tried is to use my computer microphone and

say

something, nothing happen at another end speaker.

best regards,
Thone

________________________________________________
Message sent using FreeInternet Mail system 2.7.2

---------------------------------------------------------------------
To unsubscribe, e-mail:

users-unsubscribe@sip-communicator.dev.java.net

For additional commands, e-mail:

users-help@sip-communicator.dev.java.net

Cheers
Emil

http://www.emcho.com

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail:
users-help@sip-communicator.dev.java.net

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: users-help@sip-communicator.dev.java.net


#4

Hello Thone,

Sorry for the late response.

Hi,
   I downloaded the binary one yesterday. I have JMF installed. I could
see no error in the console (as I roughly look though). But I don't know
that what I'm doing is correct or not. First, I run sip-communication,
and there was a pop-up warning that I don't have properties file so I
copied it from the source (on the web site) and configure IP Address (it
default to be root@127.0.0.1 so I change it to be root@192.168.0.39 as
of eth0). Then I made a call. The ringing sound occurred on both
computer, I clicked answer button and try to speak on my microphone. I
run sip-communication on, a linux and windowsXP. Thank you for your
help.

You need to edit the /etc/hosts file on the Linux box. The name of
your PC should not be on the same line as 127.0.0.1 ... You should
have sth like
127.0.0.1 localhost
192.168.0.39 ThonesComputer

This is a JMF issue.

Let me know if you have any more troubles
Cheers
Emil

Thone.

From: Emil Ivov [mailto:emil_ivov@yahoo.com]
Sent: Friday, July 11, 2003 5:47 AM
To: Thonelix
Cc: users@sip-communicator.dev.java.net
Subject: Re: [sip-comm] Sip-communicator usage

Hello Thone,

Which version of sip-communicator are you running - the binary package
or the CVS version?
Do you have JMF installed?

Are there any error messages popping out at the console? (Attaching a
copy of the console output would be nice ... )

Cheers
Emil

Hi,

I run the program successfully. With it, I could call another party on

my

network (with the ringing sound). After I answered the call, I tried

to send

a voice to another party but it doesn't work. I don't know how to do

it, can

you tell me how? What I tried is to use my computer microphone and

say

something, nothing happen at another end speaker.

best regards,
Thone

________________________________________________
Message sent using FreeInternet Mail system 2.7.2

---------------------------------------------------------------------
To unsubscribe, e-mail:

users-unsubscribe@sip-communicator.dev.java.net

For additional commands, e-mail:

users-help@sip-communicator.dev.java.net

Cheers
Emil

http://www.emcho.com

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail:
users-help@sip-communicator.dev.java.net

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: users-help@sip-communicator.dev.java.net

Cheers
Emil

http://www.emcho.com

···

-----Original Message-----

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: users-help@sip-communicator.dev.java.net


#5

Hi Emil,

   It works at last. Thank you very much. But I found out that the sound
has significant delay.

Thank you,
Thone

···

-----Original Message-----
From: Emil Ivov [mailto:emil_ivov@yahoo.com]
Sent: Saturday, July 12, 2003 2:35 PM
To: Thone
Cc: users@sip-communicator.dev.java.net
Subject: Re: [sip-comm] Sip-communicator usage

Hello Thone,

Sorry for the late response.

Hi,
   I downloaded the binary one yesterday. I have JMF installed. I

could

see no error in the console (as I roughly look though). But I don't

know

that what I'm doing is correct or not. First, I run sip-communication,
and there was a pop-up warning that I don't have properties file so I
copied it from the source (on the web site) and configure IP Address

(it

default to be root@127.0.0.1 so I change it to be root@192.168.0.39 as
of eth0). Then I made a call. The ringing sound occurred on both
computer, I clicked answer button and try to speak on my microphone. I
run sip-communication on, a linux and windowsXP. Thank you for your
help.

You need to edit the /etc/hosts file on the Linux box. The name of
your PC should not be on the same line as 127.0.0.1 ... You should
have sth like
127.0.0.1 localhost
192.168.0.39 ThonesComputer

This is a JMF issue.

Let me know if you have any more troubles
Cheers
Emil

Thone.

-----Original Message-----
From: Emil Ivov [mailto:emil_ivov@yahoo.com]
Sent: Friday, July 11, 2003 5:47 AM
To: Thonelix
Cc: users@sip-communicator.dev.java.net
Subject: Re: [sip-comm] Sip-communicator usage

Hello Thone,

Which version of sip-communicator are you running - the binary package
or the CVS version?
Do you have JMF installed?

Are there any error messages popping out at the console? (Attaching a
copy of the console output would be nice ... )

Cheers
Emil

Hi,

I run the program successfully. With it, I could call another party

on

my

network (with the ringing sound). After I answered the call, I tried

to send

a voice to another party but it doesn't work. I don't know how to do

it, can

you tell me how? What I tried is to use my computer microphone and

say

something, nothing happen at another end speaker.

best regards,
Thone

________________________________________________
Message sent using FreeInternet Mail system 2.7.2

---------------------------------------------------------------------
To unsubscribe, e-mail:

users-unsubscribe@sip-communicator.dev.java.net

For additional commands, e-mail:

users-help@sip-communicator.dev.java.net

Cheers
Emil

http://www.emcho.com

---------------------------------------------------------------------
To unsubscribe, e-mail:

users-unsubscribe@sip-communicator.dev.java.net

For additional commands, e-mail:
users-help@sip-communicator.dev.java.net

---------------------------------------------------------------------
To unsubscribe, e-mail:

users-unsubscribe@sip-communicator.dev.java.net

For additional commands, e-mail:

users-help@sip-communicator.dev.java.net

Cheers
Emil

http://www.emcho.com

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail:
users-help@sip-communicator.dev.java.net

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: users-help@sip-communicator.dev.java.net


#6

Hello Thone,

Glad it works.

It's true there is some delay. It is mostly due to Java Sound.
Generally performance is better on Windows.

Cheers
Emil

Hi Emil,

   It works at last. Thank you very much. But I found out that the sound
has significant delay.

Thank you,
Thone

From: Emil Ivov [mailto:emil_ivov@yahoo.com]
Sent: Saturday, July 12, 2003 2:35 PM
To: Thone
Cc: users@sip-communicator.dev.java.net
Subject: Re: [sip-comm] Sip-communicator usage

Hello Thone,

Sorry for the late response.

Hi,
   I downloaded the binary one yesterday. I have JMF installed. I

could

see no error in the console (as I roughly look though). But I don't

know

that what I'm doing is correct or not. First, I run sip-communication,
and there was a pop-up warning that I don't have properties file so I
copied it from the source (on the web site) and configure IP Address

(it

default to be root@127.0.0.1 so I change it to be root@192.168.0.39 as
of eth0). Then I made a call. The ringing sound occurred on both
computer, I clicked answer button and try to speak on my microphone. I
run sip-communication on, a linux and windowsXP. Thank you for your
help.

You need to edit the /etc/hosts file on the Linux box. The name of
your PC should not be on the same line as 127.0.0.1 ... You should
have sth like
127.0.0.1 localhost
192.168.0.39 ThonesComputer

This is a JMF issue.

Let me know if you have any more troubles
Cheers
Emil

Thone.

From: Emil Ivov [mailto:emil_ivov@yahoo.com]
Sent: Friday, July 11, 2003 5:47 AM
To: Thonelix
Cc: users@sip-communicator.dev.java.net
Subject: Re: [sip-comm] Sip-communicator usage

Hello Thone,

Which version of sip-communicator are you running - the binary package
or the CVS version?
Do you have JMF installed?

Are there any error messages popping out at the console? (Attaching a
copy of the console output would be nice ... )

Cheers
Emil

Hi,

I run the program successfully. With it, I could call another party

on

my

network (with the ringing sound). After I answered the call, I tried

to send

a voice to another party but it doesn't work. I don't know how to do

it, can

you tell me how? What I tried is to use my computer microphone and

say

something, nothing happen at another end speaker.

best regards,
Thone

________________________________________________
Message sent using FreeInternet Mail system 2.7.2

---------------------------------------------------------------------
To unsubscribe, e-mail:

users-unsubscribe@sip-communicator.dev.java.net

For additional commands, e-mail:

users-help@sip-communicator.dev.java.net

Cheers
Emil

http://www.emcho.com

---------------------------------------------------------------------
To unsubscribe, e-mail:

users-unsubscribe@sip-communicator.dev.java.net

For additional commands, e-mail:
users-help@sip-communicator.dev.java.net

---------------------------------------------------------------------
To unsubscribe, e-mail:

users-unsubscribe@sip-communicator.dev.java.net

For additional commands, e-mail:

users-help@sip-communicator.dev.java.net

Cheers
Emil

http://www.emcho.com

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail:
users-help@sip-communicator.dev.java.net

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: users-help@sip-communicator.dev.java.net

Cheers
Emil

http://www.emcho.com

···

-----Original Message-----

-----Original Message-----

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: users-help@sip-communicator.dev.java.net