[sip-comm-dev] create installer with build-installation-wix


#1

Hi,

I installed wix3.0.5217.0-x86-setup in machine..
to locate all the path of these files heat.exe and candle.exe in build.xml

when I run the script.. this create the installer in this path
sip-communicator\release\windows
the size of sc installer is 1.10Mb

after run this installer this works fine.. but when I start this
sip-communicator from windows..
this display me browse run.exe file.. is like missing into the installer..

did I missed anything..

one more thing is : msistuff.exe, mt.exe - where is these files are
located...

and please provide me the details.. about versioning.. of SC as I am using..
BUILD.ID = 0.build.by.SVN

this ant script output..

build-installation-wix:
[propertyfile] Creating new property file:
E:\workspace\sip-communicator\release
\windows\versionupdate.properties
    [mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light

     [copy] Copying 3 files to
E:\workspace\sip-communicator\release\windows\tmp\light
    [mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\lib
     [copy] Copying 5 files to
E:\workspace\sip-communicator\release\windows\tmp\light\lib
    [mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\lib\bundle
     [copy] Copying 2 files to
E:\workspace\sip-communicator\release\windows\tmp\light\lib\bundle
    [mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\native
     [copy] Copying 30 files to
E:\workspace\sip-communicator\release\windows\tmp\light\native
    [mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\sc-bundles
     [copy] Copying 71 files to
E:\workspace\sip-communicator\release\windows\tmp\light\sc-bundles
     [copy] Copying 1 file to
E:\workspace\sip-communicator\release\windows\tmp\light
     [exec] heat.exe : warning HEAT5150 : Could not harvest data from a file
that was expected to be a SelfReg DLL:
E:\workspace\sip-communicator\release\window
s\tmp\light\native\jdic_misc.dll. If this file does not support SelfReg you
canignore this warning. Otherwise, this error detail may be helpful to
diagnose the
failure: Unable to load file:
E:\workspace\sip-communicator\release\windows\tmp\light\native\jdic_misc.dll,
error: 126.
     [exec] heat.exe : warning HEAT5150 : Could not harvest data from a file
that was expected to be a SelfReg DLL:
E:\workspace\sip-communicator\release\window
s\tmp\light\native\jmfjawt.dll. If this file does not support SelfReg you
can ignore this warning. Otherwise, this error detail may be helpful to
diagnose the f
ailure: Unable to load file:
E:\workspace\sip-communicator\release\windows\tmp\light\native\jmfjawt.dll,
error: 126.
     [xslt] Processing
E:\workspace\sip-communicator\release\windows\tmp\heat.wxs to
E:\workspace\sip-communicator\release\windows\tmp\component-defines.wxi
     [xslt] Loading stylesheet
E:\workspace\sip-communicator\resources\install\windows\heat-component-defines.xsl
     [xslt] Processing
E:\workspace\sip-communicator\release\windows\tmp\heat.wxs to
E:\workspace\sip-communicator\release\windows\tmp\component-refs.wxi
     [xslt] Loading stylesheet
E:\workspace\sip-communicator\resources\install\windows\heat-component-refs.xsl
     [copy] Copying 4 files to
E:\workspace\sip-communicator\release\windows\tmp

     [exec] installer-windows.wxs
     [copy] Copying 3 files to
E:\workspace\sip-communicator\release\windows\tmp\light
     [exec]
E:\workspace\sip-communicator\release\windows\tmp\installer-windows.wxs(106)
: warning LGHT1079 : The cabinet 'Data1.cab' does not contain any files
. If this installation contains no files, this warning can likely be safely
ignored. Otherwise, please add files to the cabinet or remove it.
     [exec]
E:\workspace\sip-communicator\release\windows\tmp\installer-windows.wxs(24)
: warning LGHT1076 : ICE61: This product should remove only older versio
ns of itself. The Maximum version is not less than the current product.
(0.0.0.0 0.0.0.0)
     [copy] Copying 1 file to
E:\workspace\sip-communicator\release\windows\tmp
     [exec]
     [exec] Modifying setup properties in:
     [exec]
<E:\workspace\sip-communicator\release\windows\tmp\setup.exe>
     [exec]
     [exec] Setting 'MINIMUM_MSI' to '200' . . .
     [exec] Setting 'PRODUCTNAME' to 'SIP Communicator' . . .
     [exec] Setting 'OPERATION' to 'INSTALL' . . .
     [exec] Setting 'DATABASE' to 'setup.msi' . . .
     [exec] Skipping invalid option b . . .
     [copy] Copying 1 file to E:\workspace\sip-communicator\release\windows
     [exec] Microsoft (R) Manifest Tool version 5.2.3790.2075
     [exec] Copyright (c) Microsoft Corporation 2005.
     [exec] All rights reserved.
   [delete] Deleting directory
E:\workspace\sip-communicator\release\windows\tmp
\light
   [delete] Deleting directory
E:\workspace\sip-communicator\release\windows\tmp

BUILD SUCCESSFUL
Total time: 2 minutes 46 seconds
E:\workspace\sip-communicator>

thanks,

···

--
Regards,
Muhammad Saifuddin

Blog : http://saifo.blogspot.com
Profile : http://www.linkedin.com/in/saifuddin


#2

Please guide where should I start to understand.. this process..

and how other things. Izpack or Wix is used... to create.. installer.

thanks..

···

On Sat, May 23, 2009 at 4:06 AM, Saifuddin <saif.outwit@gmail.com> wrote:

Hi,

I installed wix3.0.5217.0-x86-setup in machine..
to locate all the path of these files heat.exe and candle.exe in build.xml

when I run the script.. this create the installer in this path
sip-communicator\release\windows
the size of sc installer is 1.10Mb

after run this installer this works fine.. but when I start this
sip-communicator from windows..
this display me browse run.exe file.. is like missing into the installer..

did I missed anything..

one more thing is : msistuff.exe, mt.exe - where is these files are
located...

and please provide me the details.. about versioning.. of SC as I am
using.. BUILD.ID = 0.build.by.SVN

this ant script output..

build-installation-wix:
[propertyfile] Creating new property file:
E:\workspace\sip-communicator\release
\windows\versionupdate.properties
    [mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light

     [copy] Copying 3 files to
E:\workspace\sip-communicator\release\windows\tmp\light
    [mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\lib
     [copy] Copying 5 files to
E:\workspace\sip-communicator\release\windows\tmp\light\lib
    [mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\lib\bundle
     [copy] Copying 2 files to
E:\workspace\sip-communicator\release\windows\tmp\light\lib\bundle
    [mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\native
     [copy] Copying 30 files to
E:\workspace\sip-communicator\release\windows\tmp\light\native
    [mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\sc-bundles
     [copy] Copying 71 files to
E:\workspace\sip-communicator\release\windows\tmp\light\sc-bundles
     [copy] Copying 1 file to
E:\workspace\sip-communicator\release\windows\tmp\light
     [exec] heat.exe : warning HEAT5150 : Could not harvest data from a
file that was expected to be a SelfReg DLL:
E:\workspace\sip-communicator\release\window
s\tmp\light\native\jdic_misc.dll. If this file does not support SelfReg you
canignore this warning. Otherwise, this error detail may be helpful to
diagnose the
failure: Unable to load file:
E:\workspace\sip-communicator\release\windows\tmp\light\native\jdic_misc.dll,
error: 126.
     [exec] heat.exe : warning HEAT5150 : Could not harvest data from a
file that was expected to be a SelfReg DLL:
E:\workspace\sip-communicator\release\window
s\tmp\light\native\jmfjawt.dll. If this file does not support SelfReg you
can ignore this warning. Otherwise, this error detail may be helpful to
diagnose the f
ailure: Unable to load file:
E:\workspace\sip-communicator\release\windows\tmp\light\native\jmfjawt.dll,
error: 126.
     [xslt] Processing
E:\workspace\sip-communicator\release\windows\tmp\heat.wxs to
E:\workspace\sip-communicator\release\windows\tmp\component-defines.wxi
     [xslt] Loading stylesheet
E:\workspace\sip-communicator\resources\install\windows\heat-component-defines.xsl
     [xslt] Processing
E:\workspace\sip-communicator\release\windows\tmp\heat.wxs to
E:\workspace\sip-communicator\release\windows\tmp\component-refs.wxi
     [xslt] Loading stylesheet
E:\workspace\sip-communicator\resources\install\windows\heat-component-refs.xsl
     [copy] Copying 4 files to
E:\workspace\sip-communicator\release\windows\tmp

     [exec] installer-windows.wxs
     [copy] Copying 3 files to
E:\workspace\sip-communicator\release\windows\tmp\light
     [exec]
E:\workspace\sip-communicator\release\windows\tmp\installer-windows.wxs(106)
: warning LGHT1079 : The cabinet 'Data1.cab' does not contain any files
. If this installation contains no files, this warning can likely be
safely ignored. Otherwise, please add files to the cabinet or remove it.
     [exec]
E:\workspace\sip-communicator\release\windows\tmp\installer-windows.wxs(24)
: warning LGHT1076 : ICE61: This product should remove only older versio
ns of itself. The Maximum version is not less than the current product.
(0.0.0.0 0.0.0.0)
     [copy] Copying 1 file to
E:\workspace\sip-communicator\release\windows\tmp
     [exec]
     [exec] Modifying setup properties in:
     [exec]
<E:\workspace\sip-communicator\release\windows\tmp\setup.exe>
     [exec]
     [exec] Setting 'MINIMUM_MSI' to '200' . . .
     [exec] Setting 'PRODUCTNAME' to 'SIP Communicator' . . .
     [exec] Setting 'OPERATION' to 'INSTALL' . . .
     [exec] Setting 'DATABASE' to 'setup.msi' . . .
     [exec] Skipping invalid option b . . .
     [copy] Copying 1 file to E:\workspace\sip-communicator\release\windows
     [exec] Microsoft (R) Manifest Tool version 5.2.3790.2075
     [exec] Copyright (c) Microsoft Corporation 2005.
     [exec] All rights reserved.
   [delete] Deleting directory
E:\workspace\sip-communicator\release\windows\tmp
\light
   [delete] Deleting directory
E:\workspace\sip-communicator\release\windows\tmp

BUILD SUCCESSFUL
Total time: 2 minutes 46 seconds
E:\workspace\sip-communicator>

thanks,

--
Regards,
Muhammad Saifuddin

Blog : http://saifo.blogspot.com
Profile : http://www.linkedin.com/in/saifuddin

--
Regards,
Muhammad Saifuddin

Blog : http://saifo.blogspot.com
Profile : http://www.linkedin.com/in/saifuddin


#3

one more thing is : msistuff.exe, mt.exe - where is these files are
located...

http://www.google.com/search?q=msistuff.exe
http://www.google.com/search?q=mt.exe

···

2009/5/23 Saifuddin <saif.outwit@gmail.com>:

Hi,

I installed wix3.0.5217.0-x86-setup in machine..
to locate all the path of these files heat.exe and candle.exe in build.xml

when I run the script.. this create the installer in this path
sip-communicator\release\windows
the size of sc installer is 1.10Mb

after run this installer this works fine.. but when I start this
sip-communicator from windows..
this display me browse run.exe file.. is like missing into the installer..

did I missed anything..

one more thing is : msistuff.exe, mt.exe - where is these files are
located...

and please provide me the details.. about versioning.. of SC as I am using..
BUILD.ID = 0.build.by.SVN

this ant script output..

build-installation-wix:
[propertyfile] Creating new property file:
E:\workspace\sip-communicator\release
\windows\versionupdate.properties
[mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light

 \[copy\] Copying 3 files to

E:\workspace\sip-communicator\release\windows\tmp\light
[mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\lib
[copy] Copying 5 files to
E:\workspace\sip-communicator\release\windows\tmp\light\lib
[mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\lib\bundle
[copy] Copying 2 files to
E:\workspace\sip-communicator\release\windows\tmp\light\lib\bundle
[mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\native
[copy] Copying 30 files to
E:\workspace\sip-communicator\release\windows\tmp\light\native
[mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\sc-bundles
[copy] Copying 71 files to
E:\workspace\sip-communicator\release\windows\tmp\light\sc-bundles
[copy] Copying 1 file to
E:\workspace\sip-communicator\release\windows\tmp\light
[exec] heat.exe : warning HEAT5150 : Could not harvest data from a file
that was expected to be a SelfReg DLL:
E:\workspace\sip-communicator\release\window
s\tmp\light\native\jdic_misc.dll. If this file does not support SelfReg you
canignore this warning. Otherwise, this error detail may be helpful to
diagnose the
failure: Unable to load file:
E:\workspace\sip-communicator\release\windows\tmp\light\native\jdic_misc.dll,
error: 126.
[exec] heat.exe : warning HEAT5150 : Could not harvest data from a file
that was expected to be a SelfReg DLL:
E:\workspace\sip-communicator\release\window
s\tmp\light\native\jmfjawt.dll. If this file does not support SelfReg you
can ignore this warning. Otherwise, this error detail may be helpful to
diagnose the f
ailure: Unable to load file:
E:\workspace\sip-communicator\release\windows\tmp\light\native\jmfjawt.dll,
error: 126.
[xslt] Processing
E:\workspace\sip-communicator\release\windows\tmp\heat.wxs to
E:\workspace\sip-communicator\release\windows\tmp\component-defines.wxi
[xslt] Loading stylesheet
E:\workspace\sip-communicator\resources\install\windows\heat-component-defines.xsl
[xslt] Processing
E:\workspace\sip-communicator\release\windows\tmp\heat.wxs to
E:\workspace\sip-communicator\release\windows\tmp\component-refs.wxi
[xslt] Loading stylesheet
E:\workspace\sip-communicator\resources\install\windows\heat-component-refs.xsl
[copy] Copying 4 files to
E:\workspace\sip-communicator\release\windows\tmp

 \[exec\] installer\-windows\.wxs
 \[copy\] Copying 3 files to

E:\workspace\sip-communicator\release\windows\tmp\light
[exec]
E:\workspace\sip-communicator\release\windows\tmp\installer-windows.wxs(106)
: warning LGHT1079 : The cabinet 'Data1.cab' does not contain any files
. If this installation contains no files, this warning can likely be safely
ignored. Otherwise, please add files to the cabinet or remove it.
[exec]
E:\workspace\sip-communicator\release\windows\tmp\installer-windows.wxs(24)
: warning LGHT1076 : ICE61: This product should remove only older versio
ns of itself. The Maximum version is not less than the current product.
(0.0.0.0 0.0.0.0)
[copy] Copying 1 file to
E:\workspace\sip-communicator\release\windows\tmp
[exec]
[exec] Modifying setup properties in:
[exec]
<E:\workspace\sip-communicator\release\windows\tmp\setup.exe>
[exec]
[exec] Setting 'MINIMUM_MSI' to '200' . . .
[exec] Setting 'PRODUCTNAME' to 'SIP Communicator' . . .
[exec] Setting 'OPERATION' to 'INSTALL' . . .
[exec] Setting 'DATABASE' to 'setup.msi' . . .
[exec] Skipping invalid option b . . .
[copy] Copying 1 file to E:\workspace\sip-communicator\release\windows
[exec] Microsoft (R) Manifest Tool version 5.2.3790.2075
[exec] Copyright (c) Microsoft Corporation 2005.
[exec] All rights reserved.
[delete] Deleting directory
E:\workspace\sip-communicator\release\windows\tmp
\light
[delete] Deleting directory
E:\workspace\sip-communicator\release\windows\tmp

BUILD SUCCESSFUL
Total time: 2 minutes 46 seconds
E:\workspace\sip-communicator>

thanks,

--
Regards,
Muhammad Saifuddin

Blog : http://saifo.blogspot.com
Profile : http://www.linkedin.com/in/saifuddin

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: dev-help@sip-communicator.dev.java.net


#4

As I've previously mentioned it a couple of times of the dev mailing
list, the IzPack-based installer of SIP Communicator on Windows is
deprecated in favor of the WiX-based one.

In order to understand the installer build process, I think you should
read through resources\install\build.xml, pick up the Ant target of
the installer type of your choice and follow its dependencies. For the
WiX-based installer, one should start with the Ant target
build-installation-wix.

···

2009/5/23 Saifuddin <saif.outwit@gmail.com>:

Please guide where should I start to understand.. this process..

and how other things. Izpack or Wix is used... to create.. installer.

thanks..

On Sat, May 23, 2009 at 4:06 AM, Saifuddin <saif.outwit@gmail.com> wrote:

Hi,

I installed wix3.0.5217.0-x86-setup in machine..
to locate all the path of these files heat.exe and candle.exe in build.xml

when I run the script.. this create the installer in this path
sip-communicator\release\windows
the size of sc installer is 1.10Mb

after run this installer this works fine.. but when I start this
sip-communicator from windows..
this display me browse run.exe file.. is like missing into the installer..

did I missed anything..

one more thing is : msistuff.exe, mt.exe - where is these files are
located...

and please provide me the details.. about versioning.. of SC as I am
using.. BUILD.ID = 0.build.by.SVN

this ant script output..

build-installation-wix:
[propertyfile] Creating new property file:
E:\workspace\sip-communicator\release
\windows\versionupdate.properties
[mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light

 \[copy\] Copying 3 files to

E:\workspace\sip-communicator\release\windows\tmp\light
[mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\lib
[copy] Copying 5 files to
E:\workspace\sip-communicator\release\windows\tmp\light\lib
[mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\lib\bundle
[copy] Copying 2 files to
E:\workspace\sip-communicator\release\windows\tmp\light\lib\bundle
[mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\native
[copy] Copying 30 files to
E:\workspace\sip-communicator\release\windows\tmp\light\native
[mkdir] Created dir:
E:\workspace\sip-communicator\release\windows\tmp\light\sc-bundles
[copy] Copying 71 files to
E:\workspace\sip-communicator\release\windows\tmp\light\sc-bundles
[copy] Copying 1 file to
E:\workspace\sip-communicator\release\windows\tmp\light
[exec] heat.exe : warning HEAT5150 : Could not harvest data from a
file that was expected to be a SelfReg DLL:
E:\workspace\sip-communicator\release\window
s\tmp\light\native\jdic_misc.dll. If this file does not support SelfReg
you canignore this warning. Otherwise, this error detail may be helpful to
diagnose the
failure: Unable to load file:
E:\workspace\sip-communicator\release\windows\tmp\light\native\jdic_misc.dll,
error: 126.
[exec] heat.exe : warning HEAT5150 : Could not harvest data from a
file that was expected to be a SelfReg DLL:
E:\workspace\sip-communicator\release\window
s\tmp\light\native\jmfjawt.dll. If this file does not support SelfReg you
can ignore this warning. Otherwise, this error detail may be helpful to
diagnose the f
ailure: Unable to load file:
E:\workspace\sip-communicator\release\windows\tmp\light\native\jmfjawt.dll,
error: 126.
[xslt] Processing
E:\workspace\sip-communicator\release\windows\tmp\heat.wxs to
E:\workspace\sip-communicator\release\windows\tmp\component-defines.wxi
[xslt] Loading stylesheet
E:\workspace\sip-communicator\resources\install\windows\heat-component-defines.xsl
[xslt] Processing
E:\workspace\sip-communicator\release\windows\tmp\heat.wxs to
E:\workspace\sip-communicator\release\windows\tmp\component-refs.wxi
[xslt] Loading stylesheet
E:\workspace\sip-communicator\resources\install\windows\heat-component-refs.xsl
[copy] Copying 4 files to
E:\workspace\sip-communicator\release\windows\tmp

 \[exec\] installer\-windows\.wxs
 \[copy\] Copying 3 files to

E:\workspace\sip-communicator\release\windows\tmp\light
[exec]
E:\workspace\sip-communicator\release\windows\tmp\installer-windows.wxs(106)
: warning LGHT1079 : The cabinet 'Data1.cab' does not contain any files
. If this installation contains no files, this warning can likely be
safely ignored. Otherwise, please add files to the cabinet or remove it.
[exec]
E:\workspace\sip-communicator\release\windows\tmp\installer-windows.wxs(24)
: warning LGHT1076 : ICE61: This product should remove only older versio
ns of itself. The Maximum version is not less than the current product.
(0.0.0.0 0.0.0.0)
[copy] Copying 1 file to
E:\workspace\sip-communicator\release\windows\tmp
[exec]
[exec] Modifying setup properties in:
[exec]
<E:\workspace\sip-communicator\release\windows\tmp\setup.exe>
[exec]
[exec] Setting 'MINIMUM_MSI' to '200' . . .
[exec] Setting 'PRODUCTNAME' to 'SIP Communicator' . . .
[exec] Setting 'OPERATION' to 'INSTALL' . . .
[exec] Setting 'DATABASE' to 'setup.msi' . . .
[exec] Skipping invalid option b . . .
[copy] Copying 1 file to
E:\workspace\sip-communicator\release\windows
[exec] Microsoft (R) Manifest Tool version 5.2.3790.2075
[exec] Copyright (c) Microsoft Corporation 2005.
[exec] All rights reserved.
[delete] Deleting directory
E:\workspace\sip-communicator\release\windows\tmp
\light
[delete] Deleting directory
E:\workspace\sip-communicator\release\windows\tmp

BUILD SUCCESSFUL
Total time: 2 minutes 46 seconds
E:\workspace\sip-communicator>

thanks,

--
Regards,
Muhammad Saifuddin

Blog : http://saifo.blogspot.com
Profile : http://www.linkedin.com/in/saifuddin

--
Regards,
Muhammad Saifuddin

Blog : http://saifo.blogspot.com
Profile : http://www.linkedin.com/in/saifuddin

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: dev-help@sip-communicator.dev.java.net


#5

Hi Lubomir,

Thanks for your reply..

and now I follow up this build-installation-wix again...

but how about my first try my ant script output I did mentioned in my
first..
anything strange you found in this.. output.. or ? please reply

thanks,

···

On Sat, May 23, 2009 at 11:02 AM, Lubomir Marinov <lubomir.marinov@gmail.com > wrote:

As I've previously mentioned it a couple of times of the dev mailing
list, the IzPack-based installer of SIP Communicator on Windows is
deprecated in favor of the WiX-based one.

In order to understand the installer build process, I think you should
read through resources\install\build.xml, pick up the Ant target of
the installer type of your choice and follow its dependencies. For the
WiX-based installer, one should start with the Ant target
build-installation-wix.

2009/5/23 Saifuddin <saif.outwit@gmail.com>:
> Please guide where should I start to understand.. this process..
>
> and how other things. Izpack or Wix is used... to create.. installer.
>
> thanks..
>
> On Sat, May 23, 2009 at 4:06 AM, Saifuddin <saif.outwit@gmail.com> > wrote:
>>
>> Hi,
>>
>> I installed wix3.0.5217.0-x86-setup in machine..
>> to locate all the path of these files heat.exe and candle.exe in
build.xml
>>
>> when I run the script.. this create the installer in this path
>> sip-communicator\release\windows
>> the size of sc installer is 1.10Mb
>>
>> after run this installer this works fine.. but when I start this
>> sip-communicator from windows..
>> this display me browse run.exe file.. is like missing into the
installer..
>>
>> did I missed anything..
>>
>> one more thing is : msistuff.exe, mt.exe - where is these files are
>> located...
>>
>> and please provide me the details.. about versioning.. of SC as I am
>> using.. BUILD.ID = 0.build.by.SVN
>>
>> this ant script output..
>>
>> build-installation-wix:
>> [propertyfile] Creating new property file:
>> E:\workspace\sip-communicator\release
>> \windows\versionupdate.properties
>> [mkdir] Created dir:
>> E:\workspace\sip-communicator\release\windows\tmp\light
>>
>> [copy] Copying 3 files to
>> E:\workspace\sip-communicator\release\windows\tmp\light
>> [mkdir] Created dir:
>> E:\workspace\sip-communicator\release\windows\tmp\light\lib
>> [copy] Copying 5 files to
>> E:\workspace\sip-communicator\release\windows\tmp\light\lib
>> [mkdir] Created dir:
>> E:\workspace\sip-communicator\release\windows\tmp\light\lib\bundle
>> [copy] Copying 2 files to
>> E:\workspace\sip-communicator\release\windows\tmp\light\lib\bundle
>> [mkdir] Created dir:
>> E:\workspace\sip-communicator\release\windows\tmp\light\native
>> [copy] Copying 30 files to
>> E:\workspace\sip-communicator\release\windows\tmp\light\native
>> [mkdir] Created dir:
>> E:\workspace\sip-communicator\release\windows\tmp\light\sc-bundles
>> [copy] Copying 71 files to
>> E:\workspace\sip-communicator\release\windows\tmp\light\sc-bundles
>> [copy] Copying 1 file to
>> E:\workspace\sip-communicator\release\windows\tmp\light
>> [exec] heat.exe : warning HEAT5150 : Could not harvest data from a
>> file that was expected to be a SelfReg DLL:
>> E:\workspace\sip-communicator\release\window
>> s\tmp\light\native\jdic_misc.dll. If this file does not support SelfReg
>> you canignore this warning. Otherwise, this error detail may be helpful
to
>> diagnose the
>> failure: Unable to load file:
>>
E:\workspace\sip-communicator\release\windows\tmp\light\native\jdic_misc.dll,
>> error: 126.
>> [exec] heat.exe : warning HEAT5150 : Could not harvest data from a
>> file that was expected to be a SelfReg DLL:
>> E:\workspace\sip-communicator\release\window
>> s\tmp\light\native\jmfjawt.dll. If this file does not support SelfReg
you
>> can ignore this warning. Otherwise, this error detail may be helpful to
>> diagnose the f
>> ailure: Unable to load file:
>>
E:\workspace\sip-communicator\release\windows\tmp\light\native\jmfjawt.dll,
>> error: 126.
>> [xslt] Processing
>> E:\workspace\sip-communicator\release\windows\tmp\heat.wxs to
>> E:\workspace\sip-communicator\release\windows\tmp\component-defines.wxi
>> [xslt] Loading stylesheet
>>
E:\workspace\sip-communicator\resources\install\windows\heat-component-defines.xsl
>> [xslt] Processing
>> E:\workspace\sip-communicator\release\windows\tmp\heat.wxs to
>> E:\workspace\sip-communicator\release\windows\tmp\component-refs.wxi
>> [xslt] Loading stylesheet
>>
E:\workspace\sip-communicator\resources\install\windows\heat-component-refs.xsl
>> [copy] Copying 4 files to
>> E:\workspace\sip-communicator\release\windows\tmp
>>
>> [exec] installer-windows.wxs
>> [copy] Copying 3 files to
>> E:\workspace\sip-communicator\release\windows\tmp\light
>> [exec]
>>
E:\workspace\sip-communicator\release\windows\tmp\installer-windows.wxs(106)
>> : warning LGHT1079 : The cabinet 'Data1.cab' does not contain any files
>> . If this installation contains no files, this warning can likely be
>> safely ignored. Otherwise, please add files to the cabinet or remove
it.
>> [exec]
>>
E:\workspace\sip-communicator\release\windows\tmp\installer-windows.wxs(24)
>> : warning LGHT1076 : ICE61: This product should remove only older versio
>> ns of itself. The Maximum version is not less than the current product.
>> (0.0.0.0 0.0.0.0)
>> [copy] Copying 1 file to
>> E:\workspace\sip-communicator\release\windows\tmp
>> [exec]
>> [exec] Modifying setup properties in:
>> [exec]
>> <E:\workspace\sip-communicator\release\windows\tmp\setup.exe>
>> [exec]
>> [exec] Setting 'MINIMUM_MSI' to '200' . . .
>> [exec] Setting 'PRODUCTNAME' to 'SIP Communicator' . . .
>> [exec] Setting 'OPERATION' to 'INSTALL' . . .
>> [exec] Setting 'DATABASE' to 'setup.msi' . . .
>> [exec] Skipping invalid option b . . .
>> [copy] Copying 1 file to
>> E:\workspace\sip-communicator\release\windows
>> [exec] Microsoft (R) Manifest Tool version 5.2.3790.2075
>> [exec] Copyright (c) Microsoft Corporation 2005.
>> [exec] All rights reserved.
>> [delete] Deleting directory
>> E:\workspace\sip-communicator\release\windows\tmp
>> \light
>> [delete] Deleting directory
>> E:\workspace\sip-communicator\release\windows\tmp
>>
>>
>> BUILD SUCCESSFUL
>> Total time: 2 minutes 46 seconds
>> E:\workspace\sip-communicator>
>>
>> thanks,
>>
>>
>> --
>> Regards,
>> Muhammad Saifuddin
>>
>> Blog : http://saifo.blogspot.com
>> Profile : http://www.linkedin.com/in/saifuddin
>
>
>
> --
> Regards,
> Muhammad Saifuddin
>
> Blog : http://saifo.blogspot.com
> Profile : http://www.linkedin.com/in/saifuddin
>

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@sip-communicator.dev.java.net
For additional commands, e-mail: dev-help@sip-communicator.dev.java.net

--
Regards,
Muhammad Saifuddin

Blog : http://saifo.blogspot.com
Profile : http://www.linkedin.com/in/saifuddin