I'm still trying to test the call function and this time, I have tried to do
that with the *SIP Communicator 1.0 alpha2 nightly builds that I've
downloaded from the sipCommunicator web site. I installed one client on
linux and the other on windows and I tried to make a call but unfortunatly
it wasn't a sucess! It's always the same problem, it doesn't ring **and no
notify message is shown **on the other side, I only can hear the ringing
tone from the caller side. Also I noticed that some classes are not included
in the **sipCommunicator **1st release's source like the *AudioNotifierImpl
class and AudioNotifierService interface so I'm wondering if it's not
because of that.
I really need this to work so I want to know exactly what's the call
function's current state and I'll be thankful if someone (from the
developpers) can indicate me the package I should work on it to improve this
function or at least where can I find documentation about this function??
Thanks a lot for your help.
*On 4/25/07, asmouta <firstname.lastname@example.org> wrote:
I think that's because of the sip header "From", when the client 1561 try
to call the 1560 this one cannot identify him and in the From header it's
indicated as :
I joined the hole output messages of the 1560 sip-communicator client,
hope that you'll take a look at it. Please tell me if it's a problem related
to the asterisk server configuration or to the sip-communicator clients??
And I'll be very thankful if you can tell me where can I find a good
documentation about the SIP and its processing.
Thanks to all.
On 4/25/07, asmouta <email@example.com> wrote:
> Hi Emil,
> I'll do so and give you feed back. Thanks for the advice.
> On 4/25/07, Emil Ivov < firstname.lastname@example.org> wrote:
> > Hello Asma,
> > Calling functionalities are still in an alpha state in
> > sip-communicator
> > so it could happen that they don't work in some cases. I'd advise you
> > to
> > check out your call traces and try to detect where the problem comes
> > from (SIP, SDP, RTP?).
> > Emil
> > asmouta wrote:
> > > Hi all,
> > >
> > > I'm trying to make and receive calls with sip-communicator. Actually
> > > it's possible with the first release of sip-communicator but I
> > wasn't
> > > able to receive calls, I just can make ones (I hear the ring tone
> > and
> > > the communication can be established correctly). At first, I tried
> > with
> > > a sip-communicator client in one side and SJphone client in the
> > other
> > > side and I was able to call from the first to the second and to
> > > establish the communication. But it wasn't true when I did it in the
> > > other way. I thought that it was because of using another Voip
> > client so
> > > I repeated the test with two sip-communicator client and the result
> > was
> > > no communication established !! and no phone was ringing ! Hope
> > that's
> > > not the case of all of you because I need sip-communicator to work
> > > correctly, is it true?
> > >
> > > Thanks for your answers.
> > >
> > > Asma Tebessi.
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: email@example.com
> > For additional commands, e-mail: firstname.lastname@example.org