[jitsi-users] Installation error with Jitsi-meet


#1

Hi,

I have been trying to install jitsi-meet on my ubuntu 17.10 server to no
avail. I tried the instruction here: https://jitsi.org/downloads/ but got
some dependency errors that seemingly a lot of users have encountered: the
following is the error message

"...
lua5.1: /usr/lib/prosody/util/openssl.lua:110: attempt to concatenate a nil
value
stack traceback:
        /usr/lib/prosody/util/openssl.lua:110: in function 'add_sRVName'
        /usr/lib/prosody/util/openssl.lua:134: in function 'from_prosody'
        /usr/bin/prosodyctl:664: in function 'config'
        /usr/bin/prosodyctl:752: in function </usr/bin/prosodyctl:745>
        (tail call): ?
        /usr/bin/prosodyctl:861: in main chunk
        [C]: ?
dpkg: error processing package jitsi-meet-prosody (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of jitsi-meet:
jitsi-meet depends on jitsi-meet-prosody (= 1.0.2579-1); however:
  Package jitsi-meet-prosody is not configured yet.

dpkg: error processing package jitsi-meet (--configure):
dependency problems - leaving unconfigured
Processing triggers for libc-bin (2.26-0ubuntu2.1) ...
No apport report written because the error message indicates its a followup
error from a previous failure.

                              Errors were encountered while processing:
jitsi-meet-prosody
jitsi-meet
E: Sub-process /usr/bin/dpkg returned an error code (1)
..."

I was just wondering if anyone had found a solution for this?

Cheers


#2

Hi,

I just did a quick test installing new VM with ubuntu 17.10 and
following the install instructions, there was no problem which
produced for me a working deployment.
Which prosody version do you have installed on your system:
# dpkg -l | grep prosody
ii jitsi-meet-prosody 1.0.2579-1
                     all Prosody configuration for Jitsi Meet
ii prosody 0.9.12-2
                     amd64 Lightweight Jabber/XMPP server

Regards
damencho

···

On Sun, Mar 4, 2018 at 8:50 PM, Yang <lzy7071@gmail.com> wrote:

Hi,

I have been trying to install jitsi-meet on my ubuntu 17.10 server to no
avail. I tried the instruction here: https://jitsi.org/downloads/ but got
some dependency errors that seemingly a lot of users have encountered: the
following is the error message

"...
lua5.1: /usr/lib/prosody/util/openssl.lua:110: attempt to concatenate a nil
value
stack traceback:
        /usr/lib/prosody/util/openssl.lua:110: in function 'add_sRVName'
        /usr/lib/prosody/util/openssl.lua:134: in function 'from_prosody'
        /usr/bin/prosodyctl:664: in function 'config'
        /usr/bin/prosodyctl:752: in function </usr/bin/prosodyctl:745>
        (tail call): ?
        /usr/bin/prosodyctl:861: in main chunk
        [C]: ?
dpkg: error processing package jitsi-meet-prosody (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of jitsi-meet:
jitsi-meet depends on jitsi-meet-prosody (= 1.0.2579-1); however:
  Package jitsi-meet-prosody is not configured yet.

dpkg: error processing package jitsi-meet (--configure):
dependency problems - leaving unconfigured
Processing triggers for libc-bin (2.26-0ubuntu2.1) ...
No apport report written because the error message indicates its a followup
error from a previous failure.

Errors were encountered while processing:
jitsi-meet-prosody
jitsi-meet
E: Sub-process /usr/bin/dpkg returned an error code (1)
..."

I was just wondering if anyone had found a solution for this?

Cheers

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users


#3

Hi,

Thank you for the reply. The following is what I got:

ii prosody 0.10.0-1~artful4
                               amd64 Lightweight Jabber/XMPP server

It seems that I cannot install jitsi-meet-prosody.

Regards,

···

On Mon, Mar 5, 2018 at 3:28 PM Damian Minkov <damencho@jitsi.org> wrote:

Hi,

I just did a quick test installing new VM with ubuntu 17.10 and
following the install instructions, there was no problem which
produced for me a working deployment.
Which prosody version do you have installed on your system:
# dpkg -l | grep prosody
ii jitsi-meet-prosody 1.0.2579-1
                     all Prosody configuration for Jitsi Meet
ii prosody 0.9.12-2
                     amd64 Lightweight Jabber/XMPP server

Regards
damencho

On Sun, Mar 4, 2018 at 8:50 PM, Yang <lzy7071@gmail.com> wrote:
> Hi,
>
> I have been trying to install jitsi-meet on my ubuntu 17.10 server to no
> avail. I tried the instruction here: https://jitsi.org/downloads/ but
got
> some dependency errors that seemingly a lot of users have encountered:
the
> following is the error message
>
> "...
> lua5.1: /usr/lib/prosody/util/openssl.lua:110: attempt to concatenate a
nil
> value
> stack traceback:
> /usr/lib/prosody/util/openssl.lua:110: in function 'add_sRVName'
> /usr/lib/prosody/util/openssl.lua:134: in function 'from_prosody'
> /usr/bin/prosodyctl:664: in function 'config'
> /usr/bin/prosodyctl:752: in function </usr/bin/prosodyctl:745>
> (tail call): ?
> /usr/bin/prosodyctl:861: in main chunk
> [C]: ?
> dpkg: error processing package jitsi-meet-prosody (--configure):
> subprocess installed post-installation script returned error exit
status 1
> dpkg: dependency problems prevent configuration of jitsi-meet:
> jitsi-meet depends on jitsi-meet-prosody (= 1.0.2579-1); however:
> Package jitsi-meet-prosody is not configured yet.
>
> dpkg: error processing package jitsi-meet (--configure):
> dependency problems - leaving unconfigured
> Processing triggers for libc-bin (2.26-0ubuntu2.1) ...
> No apport report written because the error message indicates its a
followup
> error from a previous failure.
>
> Errors were encountered while processing:
> jitsi-meet-prosody
> jitsi-meet
> E: Sub-process /usr/bin/dpkg returned an error code (1)
> ..."
>
> I was just wondering if anyone had found a solution for this?
>
> Cheers
>
> _______________________________________________
> users mailing list
> users@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users


#4

Hi,

Yep, I see, prosody 0.10.0-1 is not the default one on 17.10.
I tried now on a clean machine with 0.10 and it failed, I see the
problem, it is about missing conf.d folder, which is a different
problem than the one you saw.
Will look at our scripts for a fix for that. But I'm pretty sure there
is a workaround. Will try it later and will write you.
Thanks for the report.

Regards
damencho

···

On Mon, Mar 5, 2018 at 5:23 PM, Yang <lzy7071@gmail.com> wrote:

Hi,

Thank you for the reply. The following is what I got:

ii prosody 0.10.0-1~artful4
amd64 Lightweight Jabber/XMPP server

It seems that I cannot install jitsi-meet-prosody.

Regards,

On Mon, Mar 5, 2018 at 3:28 PM Damian Minkov <damencho@jitsi.org> wrote:

Hi,

I just did a quick test installing new VM with ubuntu 17.10 and
following the install instructions, there was no problem which
produced for me a working deployment.
Which prosody version do you have installed on your system:
# dpkg -l | grep prosody
ii jitsi-meet-prosody 1.0.2579-1
                     all Prosody configuration for Jitsi Meet
ii prosody 0.9.12-2
                     amd64 Lightweight Jabber/XMPP server

Regards
damencho

On Sun, Mar 4, 2018 at 8:50 PM, Yang <lzy7071@gmail.com> wrote:
> Hi,
>
> I have been trying to install jitsi-meet on my ubuntu 17.10 server to no
> avail. I tried the instruction here: https://jitsi.org/downloads/ but
> got
> some dependency errors that seemingly a lot of users have encountered:
> the
> following is the error message
>
> "...
> lua5.1: /usr/lib/prosody/util/openssl.lua:110: attempt to concatenate a
> nil
> value
> stack traceback:
> /usr/lib/prosody/util/openssl.lua:110: in function 'add_sRVName'
> /usr/lib/prosody/util/openssl.lua:134: in function
> 'from_prosody'
> /usr/bin/prosodyctl:664: in function 'config'
> /usr/bin/prosodyctl:752: in function </usr/bin/prosodyctl:745>
> (tail call): ?
> /usr/bin/prosodyctl:861: in main chunk
> [C]: ?
> dpkg: error processing package jitsi-meet-prosody (--configure):
> subprocess installed post-installation script returned error exit
> status 1
> dpkg: dependency problems prevent configuration of jitsi-meet:
> jitsi-meet depends on jitsi-meet-prosody (= 1.0.2579-1); however:
> Package jitsi-meet-prosody is not configured yet.
>
> dpkg: error processing package jitsi-meet (--configure):
> dependency problems - leaving unconfigured
> Processing triggers for libc-bin (2.26-0ubuntu2.1) ...
> No apport report written because the error message indicates its a
> followup
> error from a previous failure.
>
> Errors were encountered while processing:
> jitsi-meet-prosody
> jitsi-meet
> E: Sub-process /usr/bin/dpkg returned an error code (1)
> ..."
>
> I was just wondering if anyone had found a solution for this?
>
> Cheers
>
> _______________________________________________
> users mailing list
> users@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users


#5

Hi,

Just a bit more information:

Before I added the prosody repo, I did install 0.9.12-2 ver of prosody
using "sudo apt-get install prosody". I thought my error in installing
jitsi-meet-prosody has to do with the lower version so I added the repo and
upgraded prosody to 0.10.0-1. Still has the error though. In short, both
0.9.12-2 and 0.10.0-1 version of prosody gave me the error in installing
jitsi-meet-prosody.

Thank you very much!

···

On Mon, Mar 5, 2018 at 6:50 PM Damian Minkov <damencho@jitsi.org> wrote:

Hi,

Yep, I see, prosody 0.10.0-1 is not the default one on 17.10.
I tried now on a clean machine with 0.10 and it failed, I see the
problem, it is about missing conf.d folder, which is a different
problem than the one you saw.
Will look at our scripts for a fix for that. But I'm pretty sure there
is a workaround. Will try it later and will write you.
Thanks for the report.

Regards
damencho

On Mon, Mar 5, 2018 at 5:23 PM, Yang <lzy7071@gmail.com> wrote:
> Hi,
>
> Thank you for the reply. The following is what I got:
>
> ii prosody 0.10.0-1~artful4
> amd64 Lightweight Jabber/XMPP server
>
> It seems that I cannot install jitsi-meet-prosody.
>
> Regards,
>
> On Mon, Mar 5, 2018 at 3:28 PM Damian Minkov <damencho@jitsi.org> wrote:
>>
>> Hi,
>>
>> I just did a quick test installing new VM with ubuntu 17.10 and
>> following the install instructions, there was no problem which
>> produced for me a working deployment.
>> Which prosody version do you have installed on your system:
>> # dpkg -l | grep prosody
>> ii jitsi-meet-prosody 1.0.2579-1
>> all Prosody configuration for Jitsi Meet
>> ii prosody 0.9.12-2
>> amd64 Lightweight Jabber/XMPP server
>>
>> Regards
>> damencho
>>
>>
>> On Sun, Mar 4, 2018 at 8:50 PM, Yang <lzy7071@gmail.com> wrote:
>> > Hi,
>> >
>> > I have been trying to install jitsi-meet on my ubuntu 17.10 server to
no
>> > avail. I tried the instruction here: https://jitsi.org/downloads/ but
>> > got
>> > some dependency errors that seemingly a lot of users have encountered:
>> > the
>> > following is the error message
>> >
>> > "...
>> > lua5.1: /usr/lib/prosody/util/openssl.lua:110: attempt to concatenate
a
>> > nil
>> > value
>> > stack traceback:
>> > /usr/lib/prosody/util/openssl.lua:110: in function
'add_sRVName'
>> > /usr/lib/prosody/util/openssl.lua:134: in function
>> > 'from_prosody'
>> > /usr/bin/prosodyctl:664: in function 'config'
>> > /usr/bin/prosodyctl:752: in function </usr/bin/prosodyctl:745>
>> > (tail call): ?
>> > /usr/bin/prosodyctl:861: in main chunk
>> > [C]: ?
>> > dpkg: error processing package jitsi-meet-prosody (--configure):
>> > subprocess installed post-installation script returned error exit
>> > status 1
>> > dpkg: dependency problems prevent configuration of jitsi-meet:
>> > jitsi-meet depends on jitsi-meet-prosody (= 1.0.2579-1); however:
>> > Package jitsi-meet-prosody is not configured yet.
>> >
>> > dpkg: error processing package jitsi-meet (--configure):
>> > dependency problems - leaving unconfigured
>> > Processing triggers for libc-bin (2.26-0ubuntu2.1) ...
>> > No apport report written because the error message indicates its a
>> > followup
>> > error from a previous failure.
>> >
>> > Errors were encountered while processing:
>> > jitsi-meet-prosody
>> > jitsi-meet
>> > E: Sub-process /usr/bin/dpkg returned an error code (1)
>> > ..."
>> >
>> > I was just wondering if anyone had found a solution for this?
>> >
>> > Cheers
>> >
>> > _______________________________________________
>> > users mailing list
>> > users@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/users
>>
>> _______________________________________________
>> users mailing list
>> users@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/users
>
>
> _______________________________________________
> users mailing list
> users@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users


#6

Hi,

There must be something else, cause I tested with 0.9 and everything
was working fine on a clean VM.

Regards
damencho

···

On Mon, Mar 5, 2018 at 5:59 PM, Yang <lzy7071@gmail.com> wrote:

Hi,

Just a bit more information:

Before I added the prosody repo, I did install 0.9.12-2 ver of prosody using
"sudo apt-get install prosody". I thought my error in installing
jitsi-meet-prosody has to do with the lower version so I added the repo and
upgraded prosody to 0.10.0-1. Still has the error though. In short, both
0.9.12-2 and 0.10.0-1 version of prosody gave me the error in installing
jitsi-meet-prosody.

Thank you very much!

On Mon, Mar 5, 2018 at 6:50 PM Damian Minkov <damencho@jitsi.org> wrote:

Hi,

Yep, I see, prosody 0.10.0-1 is not the default one on 17.10.
I tried now on a clean machine with 0.10 and it failed, I see the
problem, it is about missing conf.d folder, which is a different
problem than the one you saw.
Will look at our scripts for a fix for that. But I'm pretty sure there
is a workaround. Will try it later and will write you.
Thanks for the report.

Regards
damencho

On Mon, Mar 5, 2018 at 5:23 PM, Yang <lzy7071@gmail.com> wrote:
> Hi,
>
> Thank you for the reply. The following is what I got:
>
> ii prosody 0.10.0-1~artful4
> amd64 Lightweight Jabber/XMPP server
>
> It seems that I cannot install jitsi-meet-prosody.
>
> Regards,
>
> On Mon, Mar 5, 2018 at 3:28 PM Damian Minkov <damencho@jitsi.org> wrote:
>>
>> Hi,
>>
>> I just did a quick test installing new VM with ubuntu 17.10 and
>> following the install instructions, there was no problem which
>> produced for me a working deployment.
>> Which prosody version do you have installed on your system:
>> # dpkg -l | grep prosody
>> ii jitsi-meet-prosody 1.0.2579-1
>> all Prosody configuration for Jitsi Meet
>> ii prosody 0.9.12-2
>> amd64 Lightweight Jabber/XMPP server
>>
>> Regards
>> damencho
>>
>>
>> On Sun, Mar 4, 2018 at 8:50 PM, Yang <lzy7071@gmail.com> wrote:
>> > Hi,
>> >
>> > I have been trying to install jitsi-meet on my ubuntu 17.10 server to
>> > no
>> > avail. I tried the instruction here: https://jitsi.org/downloads/ but
>> > got
>> > some dependency errors that seemingly a lot of users have
>> > encountered:
>> > the
>> > following is the error message
>> >
>> > "...
>> > lua5.1: /usr/lib/prosody/util/openssl.lua:110: attempt to concatenate
>> > a
>> > nil
>> > value
>> > stack traceback:
>> > /usr/lib/prosody/util/openssl.lua:110: in function
>> > 'add_sRVName'
>> > /usr/lib/prosody/util/openssl.lua:134: in function
>> > 'from_prosody'
>> > /usr/bin/prosodyctl:664: in function 'config'
>> > /usr/bin/prosodyctl:752: in function
>> > </usr/bin/prosodyctl:745>
>> > (tail call): ?
>> > /usr/bin/prosodyctl:861: in main chunk
>> > [C]: ?
>> > dpkg: error processing package jitsi-meet-prosody (--configure):
>> > subprocess installed post-installation script returned error exit
>> > status 1
>> > dpkg: dependency problems prevent configuration of jitsi-meet:
>> > jitsi-meet depends on jitsi-meet-prosody (= 1.0.2579-1); however:
>> > Package jitsi-meet-prosody is not configured yet.
>> >
>> > dpkg: error processing package jitsi-meet (--configure):
>> > dependency problems - leaving unconfigured
>> > Processing triggers for libc-bin (2.26-0ubuntu2.1) ...
>> > No apport report written because the error message indicates its a
>> > followup
>> > error from a previous failure.
>> >
>> > Errors were encountered while processing:
>> > jitsi-meet-prosody
>> > jitsi-meet
>> > E: Sub-process /usr/bin/dpkg returned an error code (1)
>> > ..."
>> >
>> > I was just wondering if anyone had found a solution for this?
>> >
>> > Cheers
>> >
>> > _______________________________________________
>> > users mailing list
>> > users@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/users
>>
>> _______________________________________________
>> users mailing list
>> users@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/users
>
>
> _______________________________________________
> users mailing list
> users@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users


#7

Hi,

I tried this:
root@ubuntu-17:/# history
    1 apt-get update
    2 apt-get install prosody
    3 cd /etc/prosody/
    4 mc
    5 cat prosody.cfg.lua
    6 ls -l
    7 mkdir /etc/prosody/conf.d
    8 wget -qO - https://download.jitsi.org/jitsi-key.gpg.key | sudo
apt-key add -
    9 sudo sh -c "echo 'deb https://download.jitsi.org stable/' >
/etc/apt/sources.list.d/jitsi-stable.list"
   10 sudo apt-get -y update
   11 sudo apt-get -y install jitsi-meet

And it worked, worked as it installed everything without error, but
still there is a problem, as installation asked me for jicofo
component secreat and username, stuff that should be handled
automatically. And the prosody config generated was not correct (wrong
jicofo component password).
So it seems we need to take a look and fix all those issues, I will
take a note and will try to fix them the following weeks.
For now, you can use the default prosody 0.9. About your other error,
I'm not sure where it comes from, do you have it with prosody 0.9,
cause I'm not reproducing it on clean VM with 17.10.

Regards
damencho

···

On Mon, Mar 5, 2018 at 6:21 PM, Damian Minkov <damencho@jitsi.org> wrote:

Hi,

There must be something else, cause I tested with 0.9 and everything
was working fine on a clean VM.

Regards
damencho

On Mon, Mar 5, 2018 at 5:59 PM, Yang <lzy7071@gmail.com> wrote:

Hi,

Just a bit more information:

Before I added the prosody repo, I did install 0.9.12-2 ver of prosody using
"sudo apt-get install prosody". I thought my error in installing
jitsi-meet-prosody has to do with the lower version so I added the repo and
upgraded prosody to 0.10.0-1. Still has the error though. In short, both
0.9.12-2 and 0.10.0-1 version of prosody gave me the error in installing
jitsi-meet-prosody.

Thank you very much!

On Mon, Mar 5, 2018 at 6:50 PM Damian Minkov <damencho@jitsi.org> wrote:

Hi,

Yep, I see, prosody 0.10.0-1 is not the default one on 17.10.
I tried now on a clean machine with 0.10 and it failed, I see the
problem, it is about missing conf.d folder, which is a different
problem than the one you saw.
Will look at our scripts for a fix for that. But I'm pretty sure there
is a workaround. Will try it later and will write you.
Thanks for the report.

Regards
damencho

On Mon, Mar 5, 2018 at 5:23 PM, Yang <lzy7071@gmail.com> wrote:
> Hi,
>
> Thank you for the reply. The following is what I got:
>
> ii prosody 0.10.0-1~artful4
> amd64 Lightweight Jabber/XMPP server
>
> It seems that I cannot install jitsi-meet-prosody.
>
> Regards,
>
> On Mon, Mar 5, 2018 at 3:28 PM Damian Minkov <damencho@jitsi.org> wrote:
>>
>> Hi,
>>
>> I just did a quick test installing new VM with ubuntu 17.10 and
>> following the install instructions, there was no problem which
>> produced for me a working deployment.
>> Which prosody version do you have installed on your system:
>> # dpkg -l | grep prosody
>> ii jitsi-meet-prosody 1.0.2579-1
>> all Prosody configuration for Jitsi Meet
>> ii prosody 0.9.12-2
>> amd64 Lightweight Jabber/XMPP server
>>
>> Regards
>> damencho
>>
>>
>> On Sun, Mar 4, 2018 at 8:50 PM, Yang <lzy7071@gmail.com> wrote:
>> > Hi,
>> >
>> > I have been trying to install jitsi-meet on my ubuntu 17.10 server to
>> > no
>> > avail. I tried the instruction here: https://jitsi.org/downloads/ but
>> > got
>> > some dependency errors that seemingly a lot of users have
>> > encountered:
>> > the
>> > following is the error message
>> >
>> > "...
>> > lua5.1: /usr/lib/prosody/util/openssl.lua:110: attempt to concatenate
>> > a
>> > nil
>> > value
>> > stack traceback:
>> > /usr/lib/prosody/util/openssl.lua:110: in function
>> > 'add_sRVName'
>> > /usr/lib/prosody/util/openssl.lua:134: in function
>> > 'from_prosody'
>> > /usr/bin/prosodyctl:664: in function 'config'
>> > /usr/bin/prosodyctl:752: in function
>> > </usr/bin/prosodyctl:745>
>> > (tail call): ?
>> > /usr/bin/prosodyctl:861: in main chunk
>> > [C]: ?
>> > dpkg: error processing package jitsi-meet-prosody (--configure):
>> > subprocess installed post-installation script returned error exit
>> > status 1
>> > dpkg: dependency problems prevent configuration of jitsi-meet:
>> > jitsi-meet depends on jitsi-meet-prosody (= 1.0.2579-1); however:
>> > Package jitsi-meet-prosody is not configured yet.
>> >
>> > dpkg: error processing package jitsi-meet (--configure):
>> > dependency problems - leaving unconfigured
>> > Processing triggers for libc-bin (2.26-0ubuntu2.1) ...
>> > No apport report written because the error message indicates its a
>> > followup
>> > error from a previous failure.
>> >
>> > Errors were encountered while processing:
>> > jitsi-meet-prosody
>> > jitsi-meet
>> > E: Sub-process /usr/bin/dpkg returned an error code (1)
>> > ..."
>> >
>> > I was just wondering if anyone had found a solution for this?
>> >
>> > Cheers
>> >
>> > _______________________________________________
>> > users mailing list
>> > users@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/users
>>
>> _______________________________________________
>> users mailing list
>> users@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/users
>
>
> _______________________________________________
> users mailing list
> users@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users


#8

Hi,

After uninstalling apache and nginx. I redid the installation by running "sudo
apt-get -y install jitsi-meet" (ofc purging everything before hand). It
seems to be working now, even with prosody 0.10. I did have to manually
create a conf.d folder under /etc/prosody

Cheers!

···

On Mon, Mar 5, 2018 at 7:31 PM Damian Minkov <damencho@jitsi.org> wrote:

Hi,

I tried this:
root@ubuntu-17:/# history
    1 apt-get update
    2 apt-get install prosody
    3 cd /etc/prosody/
    4 mc
    5 cat prosody.cfg.lua
    6 ls -l
    7 mkdir /etc/prosody/conf.d
    8 wget -qO - https://download.jitsi.org/jitsi-key.gpg.key | sudo
apt-key add -
    9 sudo sh -c "echo 'deb https://download.jitsi.org stable/' >
/etc/apt/sources.list.d/jitsi-stable.list"
   10 sudo apt-get -y update
   11 sudo apt-get -y install jitsi-meet

And it worked, worked as it installed everything without error, but
still there is a problem, as installation asked me for jicofo
component secreat and username, stuff that should be handled
automatically. And the prosody config generated was not correct (wrong
jicofo component password).
So it seems we need to take a look and fix all those issues, I will
take a note and will try to fix them the following weeks.
For now, you can use the default prosody 0.9. About your other error,
I'm not sure where it comes from, do you have it with prosody 0.9,
cause I'm not reproducing it on clean VM with 17.10.

Regards
damencho

On Mon, Mar 5, 2018 at 6:21 PM, Damian Minkov <damencho@jitsi.org> wrote:
> Hi,
>
> There must be something else, cause I tested with 0.9 and everything
> was working fine on a clean VM.
>
> Regards
> damencho
>
>
> On Mon, Mar 5, 2018 at 5:59 PM, Yang <lzy7071@gmail.com> wrote:
>> Hi,
>>
>> Just a bit more information:
>>
>> Before I added the prosody repo, I did install 0.9.12-2 ver of prosody
using
>> "sudo apt-get install prosody". I thought my error in installing
>> jitsi-meet-prosody has to do with the lower version so I added the repo
and
>> upgraded prosody to 0.10.0-1. Still has the error though. In short, both
>> 0.9.12-2 and 0.10.0-1 version of prosody gave me the error in installing
>> jitsi-meet-prosody.
>>
>> Thank you very much!
>>
>> On Mon, Mar 5, 2018 at 6:50 PM Damian Minkov <damencho@jitsi.org> > wrote:
>>>
>>> Hi,
>>>
>>> Yep, I see, prosody 0.10.0-1 is not the default one on 17.10.
>>> I tried now on a clean machine with 0.10 and it failed, I see the
>>> problem, it is about missing conf.d folder, which is a different
>>> problem than the one you saw.
>>> Will look at our scripts for a fix for that. But I'm pretty sure there
>>> is a workaround. Will try it later and will write you.
>>> Thanks for the report.
>>>
>>> Regards
>>> damencho
>>>
>>> On Mon, Mar 5, 2018 at 5:23 PM, Yang <lzy7071@gmail.com> wrote:
>>> > Hi,
>>> >
>>> > Thank you for the reply. The following is what I got:
>>> >
>>> > ii prosody 0.10.0-1~artful4
>>> > amd64 Lightweight Jabber/XMPP server
>>> >
>>> > It seems that I cannot install jitsi-meet-prosody.
>>> >
>>> > Regards,
>>> >
>>> > On Mon, Mar 5, 2018 at 3:28 PM Damian Minkov <damencho@jitsi.org> > wrote:
>>> >>
>>> >> Hi,
>>> >>
>>> >> I just did a quick test installing new VM with ubuntu 17.10 and
>>> >> following the install instructions, there was no problem which
>>> >> produced for me a working deployment.
>>> >> Which prosody version do you have installed on your system:
>>> >> # dpkg -l | grep prosody
>>> >> ii jitsi-meet-prosody 1.0.2579-1
>>> >> all Prosody configuration for Jitsi
Meet
>>> >> ii prosody 0.9.12-2
>>> >> amd64 Lightweight Jabber/XMPP server
>>> >>
>>> >> Regards
>>> >> damencho
>>> >>
>>> >>
>>> >> On Sun, Mar 4, 2018 at 8:50 PM, Yang <lzy7071@gmail.com> wrote:
>>> >> > Hi,
>>> >> >
>>> >> > I have been trying to install jitsi-meet on my ubuntu 17.10
server to
>>> >> > no
>>> >> > avail. I tried the instruction here: https://jitsi.org/downloads/
but
>>> >> > got
>>> >> > some dependency errors that seemingly a lot of users have
>>> >> > encountered:
>>> >> > the
>>> >> > following is the error message
>>> >> >
>>> >> > "...
>>> >> > lua5.1: /usr/lib/prosody/util/openssl.lua:110: attempt to
concatenate
>>> >> > a
>>> >> > nil
>>> >> > value
>>> >> > stack traceback:
>>> >> > /usr/lib/prosody/util/openssl.lua:110: in function
>>> >> > 'add_sRVName'
>>> >> > /usr/lib/prosody/util/openssl.lua:134: in function
>>> >> > 'from_prosody'
>>> >> > /usr/bin/prosodyctl:664: in function 'config'
>>> >> > /usr/bin/prosodyctl:752: in function
>>> >> > </usr/bin/prosodyctl:745>
>>> >> > (tail call): ?
>>> >> > /usr/bin/prosodyctl:861: in main chunk
>>> >> > [C]: ?
>>> >> > dpkg: error processing package jitsi-meet-prosody (--configure):
>>> >> > subprocess installed post-installation script returned error exit
>>> >> > status 1
>>> >> > dpkg: dependency problems prevent configuration of jitsi-meet:
>>> >> > jitsi-meet depends on jitsi-meet-prosody (= 1.0.2579-1); however:
>>> >> > Package jitsi-meet-prosody is not configured yet.
>>> >> >
>>> >> > dpkg: error processing package jitsi-meet (--configure):
>>> >> > dependency problems - leaving unconfigured
>>> >> > Processing triggers for libc-bin (2.26-0ubuntu2.1) ...
>>> >> > No apport report written because the error message indicates its a
>>> >> > followup
>>> >> > error from a previous failure.
>>> >> >
>>> >> > Errors were encountered while processing:
>>> >> > jitsi-meet-prosody
>>> >> > jitsi-meet
>>> >> > E: Sub-process /usr/bin/dpkg returned an error code (1)
>>> >> > ..."
>>> >> >
>>> >> > I was just wondering if anyone had found a solution for this?
>>> >> >
>>> >> > Cheers
>>> >> >
>>> >> > _______________________________________________
>>> >> > users mailing list
>>> >> > users@jitsi.org
>>> >> > Unsubscribe instructions and other list options:
>>> >> > http://lists.jitsi.org/mailman/listinfo/users
>>> >>
>>> >> _______________________________________________
>>> >> users mailing list
>>> >> users@jitsi.org
>>> >> Unsubscribe instructions and other list options:
>>> >> http://lists.jitsi.org/mailman/listinfo/users
>>> >
>>> >
>>> > _______________________________________________
>>> > users mailing list
>>> > users@jitsi.org
>>> > Unsubscribe instructions and other list options:
>>> > http://lists.jitsi.org/mailman/listinfo/users
>>>
>>> _______________________________________________
>>> users mailing list
>>> users@jitsi.org
>>> Unsubscribe instructions and other list options:
>>> http://lists.jitsi.org/mailman/listinfo/users
>>
>>
>> _______________________________________________
>> users mailing list
>> users@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users