[jitsi-users] Bugreport: Jitsi turns off sound output for all other applications


#1

Hello,

when i start Jitsi under Linux/Kubuntu 13.10 all sound output of all other applications suddenly stops working
and to fix this, the only solution i found so far was rebooting the computer and rebooting the system.
I was not able to repair the sound output without rebooting the system.
Quiting jitsi doesn't make the sound working again.
I also found out, that this only happens when i start jitsi, so jitsi messes something up here and the problem is related to jitsi.
It does also not happen with other applications that use Java and sound output, so i don't think it's the fault of the Oracle JVM (minecraft works fine with sound and without messing
up the sound settings).

The sound is completely turned off. Even a restart off pulseaudio or using alsa directly (for example via "mplayer -ao alsa musicfile.mp3") doesn't work.

The system i am using is the following:

Distribution: Kubuntu 13.10
Kernel: Linux 3.11.0
JVM: java version "1.7.0_45"
Java(TM) SE Runtime Environment (build 1.7.0_45-b18)
Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode)
Sounddriver: snd_emu10k1
Soundcard: Soundblaster Audigy 2
CPU: Core2Duo
Desktop Environment: KDE 4.11.3
KMix: KDE 4.11.3
GPU: Nvidia Geforce GTX 550 Ti
Speakersystem: 5.1 analog active speaker connected to the Audigy 2

I tried both Jitsi clients, the stable version and one of the latest nightly builds.

stable Version: 2.2.4603.9615
jitsi_2.2-latest_amd64.deb

nightly build Version: 2.3.4973
jitsi_2.3.4973-1_amd64.deb

But the problem happens on both versions.

I hope you can help be somehow.
Below are some logs and other informations you might need or could be helpful.
I also tried some different audio configurations of jitsi, see below.

I hope you can help me somehow.
If you have questions, ask me.

Best Regards,
  Oliver C.

cat /proc/asound/cards

···

=================
  0 [NVidia ]: HDA-Intel - HDA NVidia
                       HDA NVidia at 0xef000000 irq 17
  1 [Audigy2 ]: Audigy2 - SB Audigy 2 Platinum [SB0240P]
                       SB Audigy 2 Platinum [SB0240P] (rev.4, serial:0x10021102) at 0xd000, irq 18

card 1 (the audigy 2) is the one that i use for sound output.

cat /proc/asound/devices

   1: : sequencer
   2: [ 0- 9]: digital audio playback
   3: [ 0- 8]: digital audio playback
   4: [ 0- 7]: digital audio playback
   5: [ 0- 3]: digital audio playback
   6: [ 0- 3]: hardware dependent
   7: [ 0- 2]: hardware dependent
   8: [ 0- 1]: hardware dependent
   9: [ 0- 0]: hardware dependent
  10: [ 0] : control
  11: [ 1- 0]: hardware dependent
  12: [ 1- 1]: raw midi
  13: [ 1- 0]: raw midi
  14: [ 1- 4]: digital audio playback
  15: [ 1- 4]: digital audio capture
  16: [ 1- 3]: digital audio playback
  17: [ 1- 2]: digital audio playback
  18: [ 1- 2]: digital audio capture
  19: [ 1- 1]: digital audio capture
  20: [ 1- 0]: digital audio playback
  21: [ 1- 0]: digital audio capture
  22: [ 1] : control
  23: [ 1- 2]: hardware dependent
  24: [ 1- 2]: raw midi
  25: [ 1- 3]: raw midi
  33: : timer

cat /proc/asound/pcm

00-03: HDMI 0 : HDMI 0 : playback 1
00-07: HDMI 0 : HDMI 0 : playback 1
00-08: HDMI 0 : HDMI 0 : playback 1
00-09: HDMI 0 : HDMI 0 : playback 1
01-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 1
01-01: emu10k1 mic : Mic Capture : capture 1
01-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 : capture 1
01-03: emu10k1 : Multichannel Playback : playback 1
01-04: p16v : p16v : playback 1 : capture 1

cat /proc/asound/version

Advanced Linux Sound Architecture Driver Version k3.11.0-14-generic.

=====
Jitsi logs:

1. configuration:

Version: 2.2.4603.9615
Audiosystem = PulseAudio
Speaker = Default
notification = Default

jitsi
ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
02:09:49.811 Schwerwiegend: [13] org.jitsi.impl.neomedia.device.DeviceConfiguration.error() Failed to register custom Renderer org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError: /usr/share/jitsi/lib/native/libjnawtrenderer.so: libjawt.so: Kann die Shared-Object-Datei nicht �ffnen: Datei oder Verzeichnis nicht gefunden
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
         at java.lang.Runtime.loadLibrary0(Runtime.java:849)
         at java.lang.System.loadLibrary(System.java:1088)
         at org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer.<clinit>(JAWTRenderer.java:90)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:190)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.registerCustomRenderers(DeviceConfiguration.java:815)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.<init>(DeviceConfiguration.java:288)
         at org.jitsi.impl.neomedia.MediaServiceImpl.<init>(MediaServiceImpl.java:122)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
         at java.lang.Class.newInstance(Class.java:374)
         at org.jitsi.impl.libjitsi.LibJitsiImpl.getService(LibJitsiImpl.java:132)
         at org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(LibJitsiOSGiImpl.java:85)
         at org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(LibJitsi.java:163)
         at org.jitsi.service.libjitsi.LibJitsi.getMediaService(LibJitsi.java:115)
         at net.java.sip.communicator.impl.neomedia.NeomediaActivator.start(NeomediaActivator.java:380)
         at org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)
         at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
         at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
         at org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
         at org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
         at java.lang.Thread.run(Thread.java:744)

2. configuration:

Version: 2.2.4603.9615
Audiosystem = PortAudio
Speaker = Audigy 2 Platinum [SB0240P] Multichannel Capture/PT Playback
Notification = Audigy 2 Platinum [SB0240P] Multichannel Capture/PT Playback

jitsi
ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
02:14:29.577 Schwerwiegend: [13] org.jitsi.impl.neomedia.device.DeviceConfiguration.error() Failed to register custom Renderer org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError: /usr/share/jitsi/lib/native/libjnawtrenderer.so: libjawt.so: Kann die Shared-Object-Datei nicht �ffnen: Datei oder Verzeichnis nicht gefunden
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
         at java.lang.Runtime.loadLibrary0(Runtime.java:849)
         at java.lang.System.loadLibrary(System.java:1088)
         at org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer.<clinit>(JAWTRenderer.java:90)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:190)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.registerCustomRenderers(DeviceConfiguration.java:815)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.<init>(DeviceConfiguration.java:288)
         at org.jitsi.impl.neomedia.MediaServiceImpl.<init>(MediaServiceImpl.java:122)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
         at java.lang.Class.newInstance(Class.java:374)
         at org.jitsi.impl.libjitsi.LibJitsiImpl.getService(LibJitsiImpl.java:132)
         at org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(LibJitsiOSGiImpl.java:85)
         at org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(LibJitsi.java:163)
         at org.jitsi.service.libjitsi.LibJitsi.getMediaService(LibJitsi.java:115)
         at net.java.sip.communicator.impl.neomedia.NeomediaActivator.start(NeomediaActivator.java:380)
         at org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)
         at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
         at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
         at org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
         at org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
         at java.lang.Thread.run(Thread.java:744)
warning: The VAD has been replaced by a hack pending a complete rewrite

3. configuration:

Version: 2.2.4603.9615
Audiosystem = PulseAudio
Speaker = SB Audigy2 Platinum Analog Surround 5.1
Notification = SB Audigy2 Platinum Analog Surround 5.1

jitsi
ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
02:24:23.239 Schwerwiegend: [13] org.jitsi.impl.neomedia.device.DeviceConfiguration.error() Failed to register custom Renderer org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError: /usr/share/jitsi/lib/native/libjnawtrenderer.so: libjawt.so: Kann die Shared-Object-Datei nicht �ffnen: Datei oder Verzeichnis nicht gefunden
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
         at java.lang.Runtime.loadLibrary0(Runtime.java:849)
         at java.lang.System.loadLibrary(System.java:1088)
         at org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer.<clinit>(JAWTRenderer.java:90)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:190)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.registerCustomRenderers(DeviceConfiguration.java:815)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.<init>(DeviceConfiguration.java:288)
         at org.jitsi.impl.neomedia.MediaServiceImpl.<init>(MediaServiceImpl.java:122)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
         at java.lang.Class.newInstance(Class.java:374)
         at org.jitsi.impl.libjitsi.LibJitsiImpl.getService(LibJitsiImpl.java:132)
         at org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(LibJitsiOSGiImpl.java:85)
         at org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(LibJitsi.java:163)
         at org.jitsi.service.libjitsi.LibJitsi.getMediaService(LibJitsi.java:115)
         at net.java.sip.communicator.impl.neomedia.NeomediaActivator.start(NeomediaActivator.java:380)
         at org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)
         at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
         at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
         at org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
         at org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
         at java.lang.Thread.run(Thread.java:744)

4. configuration: (nightly build!)

Version: 2.3.4973 (nightly build)
Audiosystem = PulseAudio
Speaker = SB Audigy2 Platinum Analog Surround 5.1
Notification = SB Audigy2 Platinum Analog Surround 5.1

jitsi
ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
02:46:41.575 Schwerwiegend: [13] org.jitsi.impl.neomedia.device.DeviceConfiguration.error() Failed to register custom Renderer org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError: /usr/share/jitsi/lib/native/libjnawtrenderer.so: libjawt.so: Kann die Shared-Object-Datei nicht �ffnen: Datei oder Verzeichnis nicht gefunden
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
         at java.lang.Runtime.loadLibrary0(Runtime.java:849)
         at java.lang.System.loadLibrary(System.java:1088)
         at org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer.<clinit>(JAWTRenderer.java:90)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:190)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.registerCustomRenderers(DeviceConfiguration.java:1028)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.<init>(DeviceConfiguration.java:355)
         at org.jitsi.impl.neomedia.MediaServiceImpl.<init>(MediaServiceImpl.java:141)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
         at java.lang.Class.newInstance(Class.java:374)
         at org.jitsi.impl.libjitsi.LibJitsiImpl.getService(LibJitsiImpl.java:133)
         at org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(LibJitsiOSGiImpl.java:86)

         at org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(LibJitsi.java:163)

         at org.jitsi.service.libjitsi.LibJitsi.getMediaService(LibJitsi.java:115)
         at net.java.sip.communicator.impl.neomedia.NeomediaActivator.start(NeomediaActivator.java:380)

         at org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)

         at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
         at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
         at org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
         at org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
         at java.lang.Thread.run(Thread.java:744)

lspci -vv:

00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
     Subsystem: Gigabyte Technology Co., Ltd Device 5000
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
     Latency: 0
     Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 32 bytes
     Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
     I/O behind bridge: 0000a000-0000afff
     Memory behind bridge: ec000000-efffffff
     Prefetchable memory behind bridge: 00000000d8000000-00000000e7ffffff
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport

00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
     Subsystem: Gigabyte Technology Co., Ltd Device 5004
     Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin A routed to IRQ 16
     Region 4: I/O ports at e000 [size=32]
     Capabilities: <access denied>
     Kernel driver in use: uhci_hcd

00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
     Subsystem: Gigabyte Technology Co., Ltd Device 5004
     Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin B routed to IRQ 21
     Region 4: I/O ports at e100 [size=32]
     Capabilities: <access denied>
     Kernel driver in use: uhci_hcd

00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
     Subsystem: Gigabyte Technology Co., Ltd Device 5004
     Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin C routed to IRQ 18
     Region 4: I/O ports at e500 [size=32]
     Capabilities: <access denied>
     Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
     Subsystem: Gigabyte Technology Co., Ltd Device 5006
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin C routed to IRQ 18
     Region 0: Memory at f2300000 (32-bit, non-prefetchable) [size=1K]
     Capabilities: <access denied>
     Kernel driver in use: ehci-pci

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 32 bytes
     Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
     I/O behind bridge: 00009000-00009fff
     Memory behind bridge: f2400000-f25fffff
     Prefetchable memory behind bridge: 00000000f2600000-00000000f27fffff
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 32 bytes
     Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
     I/O behind bridge: 0000b000-0000bfff
     Memory behind bridge: f2000000-f20fffff
     Prefetchable memory behind bridge: 00000000f2800000-00000000f29fffff
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 32 bytes
     Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
     I/O behind bridge: 0000c000-0000cfff
     Memory behind bridge: f0000000-f1ffffff
     Prefetchable memory behind bridge: 00000000f2a00000-00000000f2cfffff
     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>
     Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
     Subsystem: Gigabyte Technology Co., Ltd Device 5004
     Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin A routed to IRQ 23
     Region 4: I/O ports at e200 [size=32]
     Capabilities: <access denied>
     Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
     Subsystem: Gigabyte Technology Co., Ltd Device 5004
     Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin B routed to IRQ 19
     Region 4: I/O ports at e300 [size=32]
     Capabilities: <access denied>
     Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
     Subsystem: Gigabyte Technology Co., Ltd Device 5004
     Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin C routed to IRQ 18
     Region 4: I/O ports at e400 [size=32]
     Capabilities: <access denied>
     Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
     Subsystem: Gigabyte Technology Co., Ltd Device 5006
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin A routed to IRQ 23
     Region 0: Memory at f2301000 (32-bit, non-prefetchable) [size=1K]
     Capabilities: <access denied>
     Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode])
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
     I/O behind bridge: 0000d000-0000dfff
     Memory behind bridge: f2100000-f21fffff
     Prefetchable memory behind bridge: 00000000f2200000-00000000f22fffff
     Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
     BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
     Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
     Subsystem: Gigabyte Technology Co., Ltd Device 5001
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Capabilities: <access denied>
     Kernel driver in use: lpc_ich

00:1f.2 SATA controller: Intel Corporation 82801IB (ICH9) 4 port SATA Controller [AHCI mode] (rev 02) (prog-if 01 [AHCI 1.0])
     Subsystem: Gigabyte Technology Co., Ltd Device b005
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin B routed to IRQ 44
     Region 0: I/O ports at e600 [size=8]
     Region 1: I/O ports at e700 [size=4]
     Region 2: I/O ports at e800 [size=8]
     Region 3: I/O ports at e900 [size=4]
     Region 4: I/O ports at ea00 [size=32]
     Region 5: Memory at f2302000 (32-bit, non-prefetchable) [size=2K]
     Capabilities: <access denied>
     Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
     Subsystem: Gigabyte Technology Co., Ltd Device 5001
     Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Interrupt: pin C routed to IRQ 10
     Region 0: Memory at f2303000 (64-bit, non-prefetchable) [size=256]
     Region 4: I/O ports at 0500 [size=32]

01:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTX 550 Ti] (rev a1) (prog-if 00 [VGA controller])
     Subsystem: eVga.com. Corp. Device 1556
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0
     Interrupt: pin A routed to IRQ 16
     Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=32M]
     Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
     Region 3: Memory at e0000000 (64-bit, prefetchable) [size=64M]
     Region 5: I/O ports at a000 [size=128]
     [virtual] Expansion ROM at e4000000 [disabled] [size=512K]
     Capabilities: <access denied>
     Kernel driver in use: nvidia

01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1)
     Subsystem: eVga.com. Corp. Device 1556
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 32 bytes
     Interrupt: pin B routed to IRQ 17
     Region 0: Memory at ef000000 (32-bit, non-prefetchable) [size=16K]
     Capabilities: <access denied>
     Kernel driver in use: snd_hda_intel

03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) (prog-if 01 [AHCI 1.0])
     Subsystem: Gigabyte Technology Co., Ltd Motherboard
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 32 bytes
     Interrupt: pin A routed to IRQ 19
     Region 5: Memory at f2000000 (32-bit, non-prefetchable) [size=8K]
     Capabilities: <access denied>
     Kernel driver in use: ahci

03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
     Subsystem: Gigabyte Technology Co., Ltd Motherboard
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 32 bytes
     Interrupt: pin B routed to IRQ 16
     Region 0: I/O ports at b000 [size=8]
     Region 1: I/O ports at b100 [size=4]
     Region 2: I/O ports at b200 [size=8]
     Region 3: I/O ports at b300 [size=4]
     Region 4: I/O ports at b400 [size=16]
     Capabilities: <access denied>
     Kernel driver in use: pata_jmicron

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
     Subsystem: Gigabyte Technology Co., Ltd Motherboard
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 0, Cache Line Size: 32 bytes
     Interrupt: pin A routed to IRQ 45
     Region 0: I/O ports at c000 [size=256]
     Region 2: Memory at f1000000 (64-bit, non-prefetchable) [size=4K]
     [virtual] Expansion ROM at f2a00000 [disabled] [size=128K]
     Capabilities: <access denied>
     Kernel driver in use: r8169

05:00.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
     Subsystem: Device 1ae4:0003
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 32 (2000ns min, 63750ns max)
     Interrupt: pin A routed to IRQ 20
     Region 0: Memory at f2200000 (32-bit, prefetchable) [size=4K]
     Kernel driver in use: Mantis

05:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
     Subsystem: Creative Labs SB Audigy2 Platinum
     Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 32 (500ns min, 5000ns max)
     Interrupt: pin A routed to IRQ 18
     Region 0: I/O ports at d000 [size=64]
     Capabilities: <access denied>
     Kernel driver in use: snd_emu10k1

05:02.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
     Subsystem: Creative Labs SB Audigy2 MIDI/Game Port
     Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 32
     Region 0: I/O ports at d100 [size=8]
     Capabilities: <access denied>
     Kernel driver in use: Emu10k1_gameport

05:02.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) (prog-if 10 [OHCI])
     Subsystem: Creative Labs SB Audigy FireWire Port
     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
     Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
     Interrupt: pin B routed to IRQ 16
     Region 0: Memory at f2104000 (32-bit, non-prefetchable) [size=2K]
     Region 1: Memory at f2100000 (32-bit, non-prefetchable) [size=16K]
     Capabilities: <access denied>
     Kernel driver in use: firewire_ohci

lsmod:

Module Size Used by
pci_stub 12622 1
vboxpci 23194 0
vboxnetadp 25670 0
vboxnetflt 27613 0
vboxdrv 320455 3 vboxnetadp,vboxnetflt,vboxpci
parport_pc 32701 0
ppdev 17671 0
bnep 19564 2
rfcomm 69070 0
bluetooth 371880 10 bnep,rfcomm
snd_emu10k1_synth 17293 0
snd_emux_synth 42767 1 snd_emu10k1_synth
snd_seq_midi_emul 17744 1 snd_emux_synth
snd_seq_virmidi 13420 1 snd_emux_synth
lnbp21 12942 1
stb6100 13522 1
stb0899 40666 1
coretemp 13435 0
kvm_intel 138538 0
kvm 431315 1 kvm_intel
snd_hda_codec_hdmi 41117 4
gpio_ich 13476 0
snd_emu10k1 161168 12 snd_emu10k1_synth
binfmt_misc 17468 1
snd_util_mem 14117 2 snd_emux_synth,snd_emu10k1
snd_ac97_codec 130236 1 snd_emu10k1
snd_hda_intel 48171 2
nvidia 9451814 65
microcode 23518 0
ac97_bus 12730 1 snd_ac97_codec
lpc_ich 21080 0
snd_hda_codec 188738 2 snd_hda_codec_hdmi,snd_hda_intel
emu10k1_gp 12613 0
snd_hwdep 13602 3 snd_hda_codec,snd_emux_synth,snd_emu10k1
serio_raw 13413 0
snd_seq_midi 13324 0
mantis 23317 0
gameport 15435 2 emu10k1_gp
snd_seq_midi_event 14899 2 snd_seq_virmidi,snd_seq_midi
mantis_core 40086 1 mantis
snd_rawmidi 30095 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
dvb_core 117436 1 mantis_core
snd_seq 61560 5 snd_seq_midi_event,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi
snd_pcm 102033 8 snd_ac97_codec,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_emu10k1
snd_seq_device 14497 5 snd_seq,snd_rawmidi,snd_emu10k1_synth,snd_emu10k1,snd_seq_midi
snd_page_alloc 18710 3 snd_pcm,snd_hda_intel,snd_emu10k1
snd_timer 29433 6 snd_pcm,snd_seq,snd_emu10k1
drm 296739 2 nvidia
snd 69141 36 snd_ac97_codec,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_emu10k1_synth,snd_hda_codec,snd_hda_intel,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_seq_device,snd_seq_midi_emul,snd_seq_midi
soundcore 12680 1 snd
mac_hid 13205 0
lp 17759 0
parport 42299 3 lp,ppdev,parport_pc
pata_acpi 13038 0
hid_generic 12548 0
usbhid 53014 0
hid 105818 2 hid_generic,usbhid
firewire_ohci 40060 0
firewire_core 64476 1 firewire_ohci
crc_itu_t 12707 1 firewire_core
r8169 67341 0
mii 13934 1 r8169
pata_jmicron 12758 0
ahci 25819 4
libahci 31898 1 ahci

dmesg:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-14-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #21-Ubuntu SMP Tue Nov 12 17:04:55 UTC 2013 (Ubuntu 3.11.0-14.21-generic 3.11.7)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-14-generic root=UUID=c0c306a0-dc8e-43f0-8d8f-b6992bfff41e ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7edffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7ee0000-0x00000000d7ee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d7ee3000-0x00000000d7eeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d7ef0000-0x00000000d7efffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e8000000-0x00000000ebffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000227ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. P35-DS3/P35-DS3, BIOS F14 06/18/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x228000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D8000000 mask FF8000000 uncachable
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 230000000 mask FF0000000 uncachable
[ 0.000000] 6 base 228000000 mask FF8000000 uncachable
[ 0.000000] 7 base 0D7F00000 mask FFFF00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 3456MB, range: 128MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 5, base: 8960MB, range: 256MB, type UC
[ 0.000000] reg 6, base: 8832MB, range: 128MB, type UC
[ 0.000000] reg 7, base: 3455MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 8191M
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 64K chunk_size: 256M num_reg: 8 lose cover RAM: -128M
[ 0.000000] *BAD*gran_size: 64K chunk_size: 512M num_reg: 8 lose cover RAM: -256M
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 64K chunk_size: 2G num_reg: 8 lose cover RAM: -1G
[ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 128K chunk_size: 256M num_reg: 8 lose cover RAM: -128M
[ 0.000000] *BAD*gran_size: 128K chunk_size: 512M num_reg: 8 lose cover RAM: -256M
[ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 128K chunk_size: 2G num_reg: 8 lose cover RAM: -1G
[ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 256K chunk_size: 256M num_reg: 8 lose cover RAM: -128M
[ 0.000000] *BAD*gran_size: 256K chunk_size: 512M num_reg: 8 lose cover RAM: -256M
[ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 256K chunk_size: 2G num_reg: 8 lose cover RAM: -1G
[ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 512K chunk_size: 256M num_reg: 8 lose cover RAM: -128M
[ 0.000000] *BAD*gran_size: 512K chunk_size: 512M num_reg: 8 lose cover RAM: -256M
[ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 512K chunk_size: 2G num_reg: 8 lose cover RAM: -1G
[ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 8 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 1M chunk_size: 256M num_reg: 8 lose cover RAM: -128M
[ 0.000000] *BAD*gran_size: 1M chunk_size: 512M num_reg: 8 lose cover RAM: -256M
[ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 8 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 1M chunk_size: 2G num_reg: 8 lose cover RAM: -1G
[ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 8 lose cover RAM: 1M
[ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 8 lose cover RAM: 1M
[ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 8 lose cover RAM: 1M
[ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 8 lose cover RAM: 1M
[ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 8 lose cover RAM: 1M
[ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 8 lose cover RAM: 1M
[ 0.000000] *BAD*gran_size: 2M chunk_size: 256M num_reg: 8 lose cover RAM: -127M
[ 0.000000] *BAD*gran_size: 2M chunk_size: 512M num_reg: 8 lose cover RAM: -255M
[ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 8 lose cover RAM: 1M
[ 0.000000] *BAD*gran_size: 2M chunk_size: 2G num_reg: 8 lose cover RAM: -1023M
[ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 8 lose cover RAM: 4739M
[ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 8 lose cover RAM: 3M
[ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 8 lose cover RAM: 3M
[ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 8 lose cover RAM: 3M
[ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 8 lose cover RAM: 3M
[ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 8 lose cover RAM: 3M
[ 0.000000] *BAD*gran_size: 4M chunk_size: 256M num_reg: 8 lose cover RAM: -125M
[ 0.000000] *BAD*gran_size: 4M chunk_size: 512M num_reg: 8 lose cover RAM: -253M
[ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 8 lose cover RAM: 3M
[ 0.000000] *BAD*gran_size: 4M chunk_size: 2G num_reg: 8 lose cover RAM: -1021M
[ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 8 lose cover RAM: 647M
[ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 8 lose cover RAM: 7M
[ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 8 lose cover RAM: 7M
[ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 8 lose cover RAM: 7M
[ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 8 lose cover RAM: 7M
[ 0.000000] *BAD*gran_size: 8M chunk_size: 256M num_reg: 8 lose cover RAM: -121M
[ 0.000000] *BAD*gran_size: 8M chunk_size: 512M num_reg: 8 lose cover RAM: -249M
[ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 8 lose cover RAM: 7M
[ 0.000000] *BAD*gran_size: 8M chunk_size: 2G num_reg: 8 lose cover RAM: -1017M
[ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 8 lose cover RAM: 143M
[ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 8 lose cover RAM: 15M
[ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 8 lose cover RAM: 15M
[ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 8 lose cover RAM: 15M
[ 0.000000] *BAD*gran_size: 16M chunk_size: 256M num_reg: 8 lose cover RAM: -113M
[ 0.000000] *BAD*gran_size: 16M chunk_size: 512M num_reg: 8 lose cover RAM: -241M
[ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 8 lose cover RAM: 15M
[ 0.000000] *BAD*gran_size: 16M chunk_size: 2G num_reg: 8 lose cover RAM: -1009M
[ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 8 lose cover RAM: 31M
[ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 8 lose cover RAM: 31M
[ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 8 lose cover RAM: 31M
[ 0.000000] *BAD*gran_size: 32M chunk_size: 256M num_reg: 8 lose cover RAM: -97M
[ 0.000000] *BAD*gran_size: 32M chunk_size: 512M num_reg: 8 lose cover RAM: -225M
[ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 8 lose cover RAM: 31M
[ 0.000000] *BAD*gran_size: 32M chunk_size: 2G num_reg: 8 lose cover RAM: -993M
[ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 7 lose cover RAM: 63M
[ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 8 lose cover RAM: 63M
[ 0.000000] *BAD*gran_size: 64M chunk_size: 256M num_reg: 8 lose cover RAM: -65M
[ 0.000000] *BAD*gran_size: 64M chunk_size: 512M num_reg: 8 lose cover RAM: -193M
[ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 8 lose cover RAM: 63M
[ 0.000000] *BAD*gran_size: 64M chunk_size: 2G num_reg: 8 lose cover RAM: -961M
[ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 6 lose cover RAM: 127M
[ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 7 lose cover RAM: 127M
[ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 8 lose cover RAM: 127M
[ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 7 lose cover RAM: 127M
[ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 8 lose cover RAM: 127M
[ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 5 lose cover RAM: 255M
[ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 6 lose cover RAM: 255M
[ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 6 lose cover RAM: 255M
[ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 7 lose cover RAM: 255M
[ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 4 lose cover RAM: 511M
[ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 5 lose cover RAM: 511M
[ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 6 lose cover RAM: 511M
[ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 3 lose cover RAM: 1023M
[ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 3 lose cover RAM: 1023M
[ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 2 lose cover RAM: 2047M
[ 0.000000] mtrr_cleanup: can not find optimal value
[ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[ 0.000000] e820: update [mem 0xd7f00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xd7ee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5160-0x000f516f] mapped at [ffff8800000f5160]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x227e00000-0x227ffffff]
[ 0.000000] [mem 0x227e00000-0x227ffffff] page 2M
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x224000000-0x227dfffff]
[ 0.000000] [mem 0x224000000-0x227dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x223ffffff]
[ 0.000000] [mem 0x200000000-0x223ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xd7edffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xd7dfffff] page 2M
[ 0.000000] [mem 0xd7e00000-0xd7edffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35072000-0x36830fff]
[ 0.000000] ACPI: RSDP 00000000000f6b50 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000d7ee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000d7ee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000d7ee3180 04B2A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000d7ee0000 00040
[ 0.000000] ACPI: HPET 00000000d7ee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000d7ee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000d7ee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000d7ee8520 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000227ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x227ffffff]
[ 0.000000] NODE_DATA [mem 0x227ff5000-0x227ff9fff]
[ 0.000000] [ffffea0000000000-ffffea00089fffff] PMD -> [ffff88021f600000-ffff8802275fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x227ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xd7edffff]
[ 0.000000] node 0: [mem 0x100000000-0x227ffffff]
[ 0.000000] On node 0 totalpages: 2096764
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13756 pages used for memmap
[ 0.000000] DMA32 zone: 880352 pages, LIFO batch:31
[ 0.000000] Normal zone: 18944 pages used for memmap
[ 0.000000] Normal zone: 1212416 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7ee0000-0xd7ee2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7ee3000-0xd7eeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7ef0000-0xd7efffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7f00000-0xe7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe8000000-0xebffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xec000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xec000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880227c00000 s86720 r8192 d23872 u524288
[ 0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063979
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-14-generic root=UUID=c0c306a0-dc8e-43f0-8d8f-b6992bfff41e ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8148556K/8387056K available (7143K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 238500K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2333.158 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.31 BogoMIPS (lpj=9332632)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004035] Security Framework initialized
[ 0.004056] AppArmor: AppArmor initialized
[ 0.004057] Yama: becoming mindful.
[ 0.008484] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011766] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013335] Mount-cache hash table entries: 256
[ 0.013572] Initializing cgroup subsys memory
[ 0.013587] Initializing cgroup subsys devices
[ 0.013589] Initializing cgroup subsys freezer
[ 0.013591] Initializing cgroup subsys blkio
[ 0.013593] Initializing cgroup subsys perf_event
[ 0.013596] Initializing cgroup subsys hugetlb
[ 0.013621] CPU: Physical Processor ID: 0
[ 0.013622] CPU: Processor Core ID: 0
[ 0.013625] mce: CPU supports 6 MCE banks
[ 0.013632] CPU0: Thermal monitoring enabled (TM2)
[ 0.013639] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.013639] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.013639] tlb_flushall_shift: -1
[ 0.013726] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[ 0.016366] ACPI: Core revision 20130517
[ 0.018261] ACPI: All ACPI Tables successfully acquired
[ 0.019480] ftrace: allocating 27804 entries in 109 pages
[ 0.028433] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069586] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (fam: 06, model: 0f, stepping: 0b)
[ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.072000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.072000] ... version: 2
[ 0.072000] ... bit width: 40
[ 0.072000] ... generic registers: 2
[ 0.072000] ... value mask: 000000ffffffffff
[ 0.072000] ... max period: 000000007fffffff
[ 0.072000] ... fixed-purpose events: 3
[ 0.072000] ... event mask: 0000000700000003
[ 0.072000] smpboot: Booting Node 0, Processors #1
[ 0.083109] Brought up 2 CPUs
[ 0.083113] smpboot: Total of 2 processors activated (9332.63 BogoMIPS)
[ 0.083198] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.084117] devtmpfs: initialized
[ 0.085547] EVM: security.selinux
[ 0.085549] EVM: security.SMACK64
[ 0.085550] EVM: security.capability
[ 0.085577] PM: Registering ACPI NVS region [mem 0xd7ee0000-0xd7ee2fff] (12288 bytes)
[ 0.085577] regulator-dummy: no parameters
[ 0.085577] RTC time: 23:12:56, date: 12/27/13
[ 0.085577] NET: Registered protocol family 16
[ 0.085577] ACPI: bus type PCI registered
[ 0.085577] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.085577] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe8000000-0xebffffff] (base 0xe8000000)
[ 0.085577] PCI: MMCONFIG at [mem 0xe8000000-0xebffffff] reserved in E820
[ 0.089942] PCI: Using configuration type 1 for base access
[ 0.092057] bio: create slab <bio-0> at 0
[ 0.092082] ACPI: Added _OSI(Module Device)
[ 0.092084] ACPI: Added _OSI(Processor Device)
[ 0.092086] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092088] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.092833] ACPI: EC: Look up EC in DSDT
[ 0.095433] ACPI: SSDT 00000000d7ee7f00 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.095614] ACPI: Dynamic OEM Table Load:
[ 0.095617] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.095707] ACPI: SSDT 00000000d7ee83c0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.095875] ACPI: Dynamic OEM Table Load:
[ 0.095878] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.096025] ACPI: Interpreter enabled
[ 0.096031] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.096036] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.096050] ACPI: (supports S0 S3 S4 S5)
[ 0.096052] ACPI: Using IOAPIC for interrupt routing
[ 0.096079] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.096170] ACPI: No dock devices found.
[ 0.101009] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.101015] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.101017] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.101206] PCI host bridge to bus 0000:00
[ 0.101210] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.101212] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.101214] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.101217] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.101219] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.101221] pci_bus 0000:00: root bus resource [mem 0xd7f00000-0xfebfffff]
[ 0.101230] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.101329] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.101366] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.101462] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.101501] pci 0000:00:1a.0: reg 0x20: [io 0xe000-0xe01f]
[ 0.101583] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.101618] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.101657] pci 0000:00:1a.1: reg 0x20: [io 0xe100-0xe11f]
[ 0.101737] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.101771] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.101810] pci 0000:00:1a.2: reg 0x20: [io 0xe500-0xe51f]
[ 0.101891] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.101932] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.101948] pci 0000:00:1a.7: reg 0x10: [mem 0xf2300000-0xf23003ff]
[ 0.102059] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.102096] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.102159] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.102212] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.102248] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.102310] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.102363] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.102397] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.102460] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.102513] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.102551] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.102590] pci 0000:00:1d.0: reg 0x20: [io 0xe200-0xe21f]
[ 0.102669] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.102703] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.102741] pci 0000:00:1d.1: reg 0x20: [io 0xe300-0xe31f]
[ 0.102821] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.102854] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.102893] pci 0000:00:1d.2: reg 0x20: [io 0xe400-0xe41f]
[ 0.102972] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.103010] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.103026] pci 0000:00:1d.7: reg 0x10: [mem 0xf2301000-0xf23013ff]
[ 0.103137] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.103171] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.103260] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.103297] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.103369] pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
[ 0.103375] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.103378] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.103382] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.103487] pci 0000:00:1f.2: [8086:2923] type 00 class 0x010601
[ 0.103504] pci 0000:00:1f.2: reg 0x10: [io 0xe600-0xe607]
[ 0.103512] pci 0000:00:1f.2: reg 0x14: [io 0xe700-0xe703]
[ 0.103519] pci 0000:00:1f.2: reg 0x18: [io 0xe800-0xe807]
[ 0.103527] pci 0000:00:1f.2: reg 0x1c: [io 0xe900-0xe903]
[ 0.103534] pci 0000:00:1f.2: reg 0x20: [io 0xea00-0xea1f]
[ 0.103542] pci 0000:00:1f.2: reg 0x24: [mem 0xf2302000-0xf23027ff]
[ 0.103584] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.103661] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.103675] pci 0000:00:1f.3: reg 0x10: [mem 0xf2303000-0xf23030ff 64bit]
[ 0.103694] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.103820] pci 0000:01:00.0: [10de:1244] type 00 class 0x030000
[ 0.103830] pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xedffffff]
[ 0.103841] pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.103851] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.103858] pci 0000:01:00.0: reg 0x24: [io 0xa000-0xa07f]
[ 0.103866] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.103938] pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300
[ 0.103948] pci 0000:01:00.1: reg 0x10: [mem 0xef000000-0xef003fff]
[ 0.104057] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.104060] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.104063] pci 0000:00:01.0: bridge window [mem 0xec000000-0xefffffff]
[ 0.104067] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
[ 0.104120] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.104124] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.104202] pci 0000:03:00.0: [197b:2363] type 00 class 0x010601
[ 0.104287] pci 0000:03:00.0: reg 0x24: [mem 0xf2000000-0xf2001fff]
[ 0.104347] pci 0000:03:00.0: PME# supported from D3hot
[ 0.104409] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.104432] pci 0000:03:00.1: reg 0x10: [io 0xb000-0xb007]
[ 0.104446] pci 0000:03:00.1: reg 0x14: [io 0xb100-0xb103]
[ 0.104459] pci 0000:03:00.1: reg 0x18: [io 0xb200-0xb207]
[ 0.104473] pci 0000:03:00.1: reg 0x1c: [io 0xb300-0xb303]
[ 0.104486] pci 0000:03:00.1: reg 0x20: [io 0xb400-0xb40f]
[ 0.104593] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.104602] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.104606] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.104610] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.104686] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.104704] pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.104734] pci 0000:04:00.0: reg 0x18: [mem 0xf1000000-0xf1000fff 64bit]
[ 0.104769] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.104846] pci 0000:04:00.0: supports D1 D2
[ 0.104848] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.104896] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.104905] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.104909] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.104913] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.104957] pci 0000:05:00.0: [1822:4e35] type 00 class 0x048000
[ 0.104970] pci 0000:05:00.0: reg 0x10: [mem 0xf2200000-0xf2200fff pref]
[ 0.105055] pci 0000:05:02.0: [1102:0004] type 00 class 0x040100
[ 0.105071] pci 0000:05:02.0: reg 0x10: [io 0xd000-0xd03f]
[ 0.105139] pci 0000:05:02.0: supports D1 D2
[ 0.105175] pci 0000:05:02.1: [1102:7003] type 00 class 0x098000
[ 0.105190] pci 0000:05:02.1: reg 0x10: [io 0xd100-0xd107]
[ 0.105259] pci 0000:05:02.1: supports D1 D2
[ 0.105293] pci 0000:05:02.2: [1102:4001] type 00 class 0x0c0010
[ 0.105310] pci 0000:05:02.2: reg 0x10: [mem 0xf2104000-0xf21047ff]
[ 0.105320] pci 0000:05:02.2: reg 0x14: [mem 0xf2100000-0xf2103fff]
[ 0.105384] pci 0000:05:02.2: supports D1 D2
[ 0.105386] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[ 0.105460] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.105464] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.105468] pci 0000:00:1e.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.105474] pci 0000:00:1e.0: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
[ 0.105476] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.105478] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.105480] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.105483] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.105485] pci 0000:00:1e.0: bridge window [mem 0xd7f00000-0xfebfffff] (subtractive decode)
[ 0.106030] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.106091] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.106149] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.106208] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.106265] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.106323] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.106381] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.106440] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.106546] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.106553] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.106591] Found 1 acpi root devices
[ 0.108017] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.108021] vgaarb: loaded
[ 0.108022] vgaarb: bridge control possible 0000:01:00.0
[ 0.108216] SCSI subsystem initialized
[ 0.108218] ACPI: bus type ATA registered
[ 0.108235] libata version 3.00 loaded.
[ 0.108235] ACPI: bus type USB registered
[ 0.108235] usbcore: registered new interface driver usbfs
[ 0.108235] usbcore: registered new interface driver hub
[ 0.108235] usbcore: registered new device driver usb
[ 0.108235] PCI: Using ACPI for IRQ routing
[ 0.109234] PCI: pci_cache_line_size set to 64 bytes
[ 0.109296] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.109298] e820: reserve RAM buffer [mem 0xd7ee0000-0xd7ffffff]
[ 0.109391] NetLabel: Initializing
[ 0.109393] NetLabel: domain hash size = 128
[ 0.109394] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.109405] NetLabel: unlabeled traffic allowed by default
[ 0.109418] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.109418] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.109418] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.113013] Switched to clocksource hpet
[ 0.118175] AppArmor: AppArmor Filesystem Enabled
[ 0.118207] pnp: PnP ACPI init
[ 0.118221] ACPI: bus type PNP registered
[ 0.118401] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.118404] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.118407] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.118409] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.118412] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.118416] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.118428] pnp 00:01: [dma 4]
[ 0.118451] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.118532] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.118575] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.118604] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.118634] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.118915] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.118975] system 00:07: [io 0x0400-0x04bf] could not be reserved
[ 0.118979] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.119191] system 00:08: [mem 0xe8000000-0xebffffff] has been reserved
[ 0.119195] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.119390] system 00:09: [mem 0x000d6000-0x000d7fff] has been reserved
[ 0.119393] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.119396] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.119399] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.119401] system 00:09: [mem 0xd7ee0000-0xd7efffff] could not be reserved
[ 0.119404] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.119407] system 00:09: [mem 0x00100000-0xd7edffff] could not be reserved
[ 0.119409] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.119412] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.119415] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.119417] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.119420] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.119424] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.119426] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[ 0.119430] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.119473] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.119479] pnp: PnP ACPI: found 11 devices
[ 0.119480] ACPI: bus type PNP unregistered
[ 0.125872] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.125876] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.125884] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.125892] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
[ 0.125903] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
[ 0.125906] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.125909] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.125911] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.125914] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.125919] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2400000-0xf25fffff]
[ 0.125923] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2600000-0xf27fffff 64bit pref]
[ 0.125927] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf2800000-0xf29fffff 64bit pref]
[ 0.125930] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf2a00000-0xf2cfffff pref]
[ 0.125934] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4000000-0xe407ffff pref]
[ 0.125937] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.125939] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.125943] pci 0000:00:01.0: bridge window [mem 0xec000000-0xefffffff]
[ 0.125946] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
[ 0.125950] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.125953] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.125957] pci 0000:00:1c.0: bridge window [mem 0xf2400000-0xf25fffff]
[ 0.125961] pci 0000:00:1c.0: bridge window [mem 0xf2600000-0xf27fffff 64bit pref]
[ 0.125967] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.125970] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.125974] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.125978] pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf29fffff 64bit pref]
[ 0.125984] pci 0000:04:00.0: BAR 6: assigned [mem 0xf2a00000-0xf2a1ffff pref]
[ 0.125986] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.125989] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.125994] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.125997] pci 0000:00:1c.4: bridge window [mem 0xf2a00000-0xf2cfffff pref]
[ 0.126003] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.126006] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.126010] pci 0000:00:1e.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.126014] pci 0000:00:1e.0: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
[ 0.126250] pci 0000:00:1e.0: setting latency timer to 64
[ 0.126254] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.126256] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.126259] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.126261] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.126263] pci_bus 0000:00: resource 8 [mem 0xd7f00000-0xfebfffff]
[ 0.126266] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.126268] pci_bus 0000:01: resource 1 [mem 0xec000000-0xefffffff]
[ 0.126270] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff 64bit pref]
[ 0.126273] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.126275] pci_bus 0000:02: resource 1 [mem 0xf2400000-0xf25fffff]
[ 0.126277] pci_bus 0000:02: resource 2 [mem 0xf2600000-0xf27fffff 64bit pref]
[ 0.126279] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.126281] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
[ 0.126284] pci_bus 0000:03: resource 2 [mem 0xf2800000-0xf29fffff 64bit pref]
[ 0.126286] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.126288] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.126290] pci_bus 0000:04: resource 2 [mem 0xf2a00000-0xf2cfffff pref]
[ 0.126293] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.126295] pci_bus 0000:05: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.126297] pci_bus 0000:05: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref]
[ 0.126299] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.126301] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.126303] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.126306] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.126308] pci_bus 0000:05: resource 8 [mem 0xd7f00000-0xfebfffff]
[ 0.126344] NET: Registered protocol family 2
[ 0.126554] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.126925] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.127208] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.127255] TCP: reno registered
[ 0.127269] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.127320] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.127440] NET: Registered protocol family 1
[ 0.128439] pci 0000:01:00.0: Boot video device
[ 0.128466] PCI: CLS 32 bytes, default 64
[ 0.128521] Trying to unpack rootfs image as initramfs...
[ 0.577604] Freeing initrd memory: 24316K (ffff880035072000 - ffff880036831000)
[ 0.577612] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.577615] software IO TLB [mem 0xd3ee0000-0xd7ee0000] (64MB) mapped at [ffff8800d3ee0000-ffff8800d7edffff]
[ 0.577777] Scanning for low memory corruption every 60 seconds
[ 0.578033] Initialise module verification
[ 0.578084] audit: initializing netlink socket (disabled)
[ 0.578099] type=2000 audit(1388185976.576:1): initialized
[ 0.609946] bounce pool size: 64 pages
[ 0.609965] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.611518] zbud: loaded
[ 0.611637] VFS: Disk quotas dquot_6.5.2
[ 0.611680] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.612220] fuse init (API version 7.22)
[ 0.612300] msgmni has been set to 15962
[ 0.612688] Key type asymmetric registered
[ 0.612691] Asymmetric key parser 'x509' registered
[ 0.612726] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.612753] io scheduler noop registered
[ 0.612755] io scheduler deadline registered (default)
[ 0.612782] io scheduler cfq registered
[ 0.612892] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.612943] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.613004] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.613062] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.613131] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.613145] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.613211] intel_idle: does not run on family 6 model 15
[ 0.613277] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.613282] ACPI: Power Button [PWRB]
[ 0.613327] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.613330] ACPI: Power Button [PWRF]
[ 0.613400] ACPI: Requesting acpi_cpufreq
[ 0.614651] GHES: HEST is not enabled!
[ 0.614725] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.616096] Linux agpgart interface v0.103
[ 0.617483] brd: module loaded
[ 0.618162] loop: module loaded
[ 0.618526] libphy: Fixed MDIO Bus: probed
[ 0.618614] tun: Universal TUN/TAP device driver, 1.6
[ 0.618615] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.618651] PPP generic driver version 2.4.2
[ 0.618690] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.618692] ehci-pci: EHCI PCI platform driver
[ 0.618780] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 0.618792] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.618798] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.622706] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.622723] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf2300000
[ 0.632023] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.632059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.632062] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.632064] usb usb1: Product: EHCI Host Controller
[ 0.632067] usb usb1: Manufacturer: Linux 3.11.0-14-generic ehci_hcd
[ 0.632070] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.632174] hub 1-0:1.0: USB hub found
[ 0.632179] hub 1-0:1.0: 6 ports detected
[ 0.632363] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.632372] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.632377] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.636285] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.636300] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf2301000
[ 0.648023] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.648038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.648041] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.648043] usb usb2: Product: EHCI Host Controller
[ 0.648046] usb usb2: Manufacturer: Linux 3.11.0-14-generic ehci_hcd
[ 0.648049] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.648142] hub 2-0:1.0: USB hub found
[ 0.648146] hub 2-0:1.0: 6 ports detected
[ 0.648273] ehci-platform: EHCI generic platform driver
[ 0.648283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.648285] ohci-platform: OHCI generic platform driver
[ 0.648291] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.648361] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.648364] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.648369] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.648399] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 0.648427] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.648430] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.648432] usb usb3: Product: UHCI Host Controller
[ 0.648434] usb usb3: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.648436] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.648518] hub 3-0:1.0: USB hub found
[ 0.648523] hub 3-0:1.0: 2 ports detected
[ 0.648648] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.648651] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.648657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.648685] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[ 0.648714] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.648717] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.648719] usb usb4: Product: UHCI Host Controller
[ 0.648721] usb usb4: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.648723] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.648800] hub 4-0:1.0: USB hub found
[ 0.648804] hub 4-0:1.0: 2 ports detected
[ 0.648930] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.648933] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.648940] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.648961] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
[ 0.648988] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.648991] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.648993] usb usb5: Product: UHCI Host Controller
[ 0.648995] usb usb5: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.648997] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.649074] hub 5-0:1.0: USB hub found
[ 0.649078] hub 5-0:1.0: 2 ports detected
[ 0.649201] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.649205] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.649210] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.649231] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
[ 0.649258] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.649261] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.649263] usb usb6: Product: UHCI Host Controller
[ 0.649265] usb usb6: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.649267] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.649341] hub 6-0:1.0: USB hub found
[ 0.649345] hub 6-0:1.0: 2 ports detected
[ 0.649468] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.649472] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.649477] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.649506] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
[ 0.649533] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.649536] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.649538] usb usb7: Product: UHCI Host Controller
[ 0.649540] usb usb7: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.649542] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.649617] hub 7-0:1.0: USB hub found
[ 0.649621] hub 7-0:1.0: 2 ports detected
[ 0.649745] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.649748] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.649753] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.649774] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[ 0.649803] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.649805] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.649807] usb usb8: Product: UHCI Host Controller
[ 0.649810] usb usb8: Manufacturer: Linux 3.11.0-14-generic uhci_hcd
[ 0.649812] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.649893] hub 8-0:1.0: USB hub found
[ 0.649897] hub 8-0:1.0: 2 ports detected
[ 0.650007] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.650009] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.650137] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.650223] mousedev: PS/2 mouse device common for all mice
[ 0.650340] rtc_cmos 00:03: RTC can wake from S4
[ 0.650446] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.650468] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.650530] device-mapper: uevent: version 1.0.3
[ 0.650587] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 0.650593] cpuidle: using governor ladder
[ 0.650595] cpuidle: using governor menu
[ 0.650604] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.650681] TCP: cubic registered
[ 0.650775] NET: Registered protocol family 10
[ 0.650969] NET: Registered protocol family 17
[ 0.650983] Key type dns_resolver registered
[ 0.651171] PM: Hibernation image not present or could not be loaded.
[ 0.651175] Loading module verification certificates
[ 0.652297] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4f57df1a3429640d83ffde722907e1377213486f'
[ 0.652309] registered taskstats version 1
[ 0.654783] Key type trusted registered
[ 0.656669] Key type encrypted registered
[ 0.658513] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.658838] Magic number: 9:675:252
[ 0.658882] uhci_hcd 0000:00:1d.0: hash matches
[ 0.658935] rtc_cmos 00:03: setting system clock to 2013-12-27 23:12:57 UTC (1388185977)
[ 0.659148] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.659150] EDD information not available.
[ 0.660392] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[ 0.660395] Write protecting the kernel read-only data: 12288k
[ 0.663291] Freeing unused kernel memory: 1036K (ffff8800016fd000 - ffff880001800000)
[ 0.665516] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[ 0.673241] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.678293] systemd-udevd[105]: starting version 204
[ 0.697613] libahci: module verification failed: signature and/or required key missing - tainting kernel
[ 0.698183] ahci 0000:00:1f.2: version 3.0
[ 0.698307] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 0.698347] ahci: SSS flag set, parallel bus scan disabled
[ 0.698373] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.698377] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
[ 0.698381] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.700891] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.701240] scsi0 : pata_jmicron
[ 0.701502] scsi1 : pata_jmicron
[ 0.701701] ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
[ 0.701703] ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
[ 0.705463] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.705474] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.705670] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[ 0.705830] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0xffffc90000c60000, 00:1a:4d:49:84:00, XID 18000000 IRQ 45
[ 0.705833] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 0.720508] scsi2 : ahci
[ 0.720574] scsi3 : ahci
[ 0.720632] scsi4 : ahci
[ 0.720697] scsi5 : ahci
[ 0.720754] scsi6 : ahci
[ 0.720811] scsi7 : ahci
[ 0.720881] ata3: SATA max UDMA/133 abar m2048@0xf2302000 port 0xf2302100 irq 44
[ 0.720884] ata4: SATA max UDMA/133 abar m2048@0xf2302000 port 0xf2302180 irq 44
[ 0.720886] ata5: DUMMY
[ 0.720887] ata6: DUMMY
[ 0.720890] ata7: SATA max UDMA/133 abar m2048@0xf2302000 port 0xf2302300 irq 44
[ 0.720892] ata8: SATA max UDMA/133 abar m2048@0xf2302000 port 0xf2302380 irq 44
[ 0.736045] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.736050] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.736350] scsi8 : ahci
[ 0.736418] scsi9 : ahci
[ 0.736476] ata9: SATA max UDMA/133 abar m8192@0xf2000000 port 0xf2000100 irq 19
[ 0.736480] ata10: SATA max UDMA/133 abar m8192@0xf2000000 port 0xf2000180 irq 19
[ 0.776050] firewire_ohci 0000:05:02.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.056038] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.060040] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.216078] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.217214] ata3.00: ATAPI: PIONEER DVD-RW DVR-212, 1.28, max UDMA/66
[ 1.218682] ata3.00: configured for UDMA/66
[ 1.225143] scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-212 1.28 PQ: 0 ANSI: 5
[ 1.236779] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.236783] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.236893] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.236971] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 1.260026] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[ 1.276109] firewire_core 0000:05:02.2: created device fw0: GUID 00023c009101c425, S400
[ 1.436720] usb 4-2: New USB device found, idVendor=046d, idProduct=c051
[ 1.436724] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.436727] usb 4-2: Product: USB-PS/2 Optical Mouse
[ 1.436729] usb 4-2: Manufacturer: Logitech
[ 1.442941] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.460768] usbcore: registered new interface driver usbhid
[ 1.460770] usbhid: USB HID core driver
[ 1.462551] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3
[ 1.462891] hid-generic 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-2/input0
[ 1.576023] tsc: Refined TSC clocksource calibration: 2333.333 MHz
[ 1.728027] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.729248] ata4.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 1.729251] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.730583] ata4.00: configured for UDMA/133
[ 1.730695] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 1.730878] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.730906] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.730940] sd 3:0:0:0: [sda] Write Protect is off
[ 1.730944] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.730992] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.838328] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[ 1.838860] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.220029] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.221215] ata7.00: ATA-8: HGST HUS724020ALA640, MF6OAA70, max UDMA/133
[ 2.221219] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.222463] ata7.00: configured for UDMA/133
[ 2.222569] scsi 6:0:0:0: Direct-Access ATA HGST HUS724020AL MF6O PQ: 0 ANSI: 5
[ 2.222760] sd 6:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.222827] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.222830] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.222854] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.223062] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.253698] sdb: sdb1 < sdb5 >
[ 2.253978] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2.540031] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.576067] Switched to clocksource tsc
[ 3.688972] kjournald starting. Commit interval 5 seconds
[ 3.689001] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 4.302144] init: ureadahead main process (214) terminated with status 5
[ 4.848257] Adding 9454216k swap on /dev/sda7. Priority:-1 extents:1 across:9454216k FS
[ 5.587013] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.709650] systemd-udevd[335]: starting version 204
[ 6.147683] EXT3-fs (sda6): using internal journal
[ 7.408846] lp: driver loaded but no devices found
[ 7.533054] kjournald starting. Commit interval 5 seconds
[ 7.542728] EXT3-fs (sda11): using internal journal
[ 7.542732] EXT3-fs (sda11): mounted filesystem with ordered data mode
[ 7.614080] kjournald starting. Commit interval 5 seconds
[ 7.614296] EXT3-fs (sda8): using internal journal
[ 7.614299] EXT3-fs (sda8): mounted filesystem with ordered data mode
[ 8.037232] [drm] Initialized drm 1.1.0 20060810
[ 8.137923] DVB: registering new adapter (Mantis DVB adapter)
[ 8.177960] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20130517/utaddress-251)
[ 8.177968] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.178012] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.273235] microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb6
[ 8.349715] nvidia: module license 'NVIDIA' taints kernel.
[ 8.349719] Disabling lock debugging due to kernel taint
[ 8.362022] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.362257] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 8.362268] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.60 Wed Sep 25 14:28:26 PDT 2013
[ 8.378629] hda_intel: Disabling MSI
[ 8.378639] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 8.378675] hda-intel 0000:01:00.1: Disabling 64bit DMA
[ 8.381977] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[ 8.784375] microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb6
[ 8.786222] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.805203] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 8.861944] type=1400 audit(1388182385.699:2): apparmor="STATUS" operation="profile_load" parent=455 profile="unconfined" name="/sbin/dhclient" pid=467 comm="apparmor_parser"
[ 8.861952] type=1400 audit(1388182385.699:3): apparmor="STATUS" operation="profile_load" parent=455 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=467 comm="apparmor_parser"
[ 8.861958] type=1400 audit(1388182385.699:4): apparmor="STATUS" operation="profile_load" parent=455 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=467 comm="apparmor_parser"
[ 8.861967] type=1400 audit(1388182385.699:5): apparmor="STATUS" operation="profile_replace" parent=523 profile="unconfined" name="/sbin/dhclient" pid=524 comm="apparmor_parser"
[ 8.861990] type=1400 audit(1388182385.699:6): apparmor="STATUS" operation="profile_replace" parent=523 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=524 comm="apparmor_parser"
[ 8.861996] type=1400 audit(1388182385.699:7): apparmor="STATUS" operation="profile_replace" parent=523 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=524 comm="apparmor_parser"
[ 8.862502] type=1400 audit(1388182385.699:8): apparmor="STATUS" operation="profile_replace" parent=455 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=467 comm="apparmor_parser"
[ 8.862508] type=1400 audit(1388182385.699:9): apparmor="STATUS" operation="profile_replace" parent=455 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=467 comm="apparmor_parser"
[ 8.862539] type=1400 audit(1388182385.699:10): apparmor="STATUS" operation="profile_replace" parent=523 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=524 comm="apparmor_parser"
[ 8.862545] type=1400 audit(1388182385.699:11): apparmor="STATUS" operation="profile_replace" parent=523 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=524 comm="apparmor_parser"
[ 9.094983] coretemp coretemp.0: Using relative temperature scale!
[ 9.094995] coretemp coretemp.0: Using relative temperature scale!
[ 9.192589] stb0899_attach: Attaching STB0899
[ 9.204187] stb6100_attach: Attaching STB6100
[ 9.220103] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input4
[ 9.220281] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input5
[ 9.220436] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
[ 9.220792] LNBx2x attached on addr=8
[ 9.220798] Mantis 0000:05:00.0: DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
[ 9.221221] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7
[ 9.227309] Installing spdif_bug patch: SB Audigy 2 Platinum [SB0240P]
[ 9.240889] gameport gameport0: EMU10K1 is pci0000:05:02.1/gameport0, io 0xd100, speed 1007kHz
[ 9.640928] init: failsafe main process (590) killed by TERM signal
[ 9.999445] Bluetooth: Core ver 2.16
[ 9.999468] NET: Registered protocol family 31
[ 9.999470] Bluetooth: HCI device and connection manager initialized
[ 9.999480] Bluetooth: HCI socket layer initialized
[ 9.999483] Bluetooth: L2CAP socket layer initialized
[ 9.999489] Bluetooth: SCO socket layer initialized
[ 10.010562] Bluetooth: RFCOMM TTY layer initialized
[ 10.010575] Bluetooth: RFCOMM socket layer initialized
[ 10.010577] Bluetooth: RFCOMM ver 1.11
[ 10.199030] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.199034] Bluetooth: BNEP filters: protocol multicast
[ 10.199044] Bluetooth: BNEP socket layer initialized
[ 10.272344] init: avahi-cups-reload main process (757) terminated with status 1
[ 10.424031] ppdev: user-space parallel port driver
[ 11.686037] vboxdrv: Found 2 processor cores.
[ 11.686157] vboxdrv: fAsync=0 offMin=0x28b offMax=0x90d
[ 11.686223] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 11.686225] vboxdrv: Successfully loaded version 4.2.16_Ubuntu (interface 0x001a0005).
[ 11.833233] vboxpci: IOMMU not found (not registered)
[ 12.753303] r8169 0000:04:00.0 eth1: link down
[ 12.753312] r8169 0000:04:00.0 eth1: link down
[ 12.753336] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.753546] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 14.441327] init: udev-fallback-graphics main process (1175) terminated with status 1
[ 15.277801] r8169 0000:04:00.0 eth1: link up
[ 15.277811] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 527.299225] perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

Here's an output of ps -A before i started jitsi:

   PID TTY TIME CMD
     1 ? 00:00:01 init
     2 ? 00:00:00 kthreadd
     3 ? 00:00:00 ksoftirqd/0
     4 ? 00:00:00 kworker/0:0
     5 ? 00:00:00 kworker/0:0H
     6 ? 00:00:00 kworker/u8:0
     7 ? 00:00:00 migration/0
     8 ? 00:00:00 rcu_bh
     9 ? 00:00:00 rcuob/0
    10 ? 00:00:00 rcuob/1
    11 ? 00:00:00 rcuob/2
    12 ? 00:00:00 rcuob/3
    13 ? 00:00:00 rcu_sched
    14 ? 00:00:00 rcuos/0
    15 ? 00:00:00 rcuos/1
    16 ? 00:00:00 rcuos/2
    17 ? 00:00:00 rcuos/3
    18 ? 00:00:00 watchdog/0
    19 ? 00:00:00 watchdog/1
    20 ? 00:00:00 migration/1
    21 ? 00:00:00 ksoftirqd/1
    22 ? 00:00:00 kworker/1:0
    23 ? 00:00:00 kworker/1:0H
    24 ? 00:00:00 khelper
    25 ? 00:00:00 kdevtmpfs
    26 ? 00:00:00 netns
    27 ? 00:00:00 writeback
    28 ? 00:00:00 kintegrityd
    29 ? 00:00:00 bioset
    30 ? 00:00:00 kworker/u9:0
    31 ? 00:00:00 kblockd
    32 ? 00:00:00 ata_sff
    33 ? 00:00:00 khubd
    34 ? 00:00:00 md
    35 ? 00:00:00 devfreq_wq
    36 ? 00:00:00 kworker/0:1
    37 ? 00:00:00 kworker/1:1
    38 ? 00:00:00 khungtaskd
    39 ? 00:00:00 kswapd0
    40 ? 00:00:00 ksmd
    41 ? 00:00:00 khugepaged
    42 ? 00:00:00 fsnotify_mark
    43 ? 00:00:00 ecryptfs-kthrea
    44 ? 00:00:00 crypto
    56 ? 00:00:00 kthrotld
    57 ? 00:00:00 kworker/u8:1
    77 ? 00:00:00 deferwq
    78 ? 00:00:00 charger_manager
    79 ? 00:00:00 kworker/1:2
   122 ? 00:00:00 firewire
   123 ? 00:00:00 scsi_eh_0
   124 ? 00:00:00 scsi_eh_1
   125 ? 00:00:00 kworker/u8:2
   126 ? 00:00:00 kworker/u8:3
   127 ? 00:00:00 scsi_eh_2
   128 ? 00:00:00 scsi_eh_3
   129 ? 00:00:00 scsi_eh_4
   130 ? 00:00:00 scsi_eh_5
   131 ? 00:00:00 scsi_eh_6
   132 ? 00:00:00 scsi_eh_7
   133 ? 00:00:00 kworker/u8:4
   134 ? 00:00:00 kworker/u8:5
   135 ? 00:00:00 kworker/u8:6
   136 ? 00:00:00 kworker/u8:7
   137 ? 00:00:00 kworker/u8:8
   138 ? 00:00:00 kworker/u8:9
   139 ? 00:00:00 scsi_eh_8
   140 ? 00:00:00 scsi_eh_9
   141 ? 00:00:00 kworker/u8:10
   142 ? 00:00:00 kworker/u8:11
   194 ? 00:00:00 kjournald
   324 ? 00:00:00 upstart-udev-br
   343 ? 00:00:00 systemd-udevd
   383 ? 00:00:00 kworker/u9:1
   384 ? 00:00:00 kjournald
   400 ? 00:00:00 kjournald
   487 ? 00:00:00 hd-audio0
   505 ? 00:00:00 upstart-file-br
   584 ? 00:00:00 rsyslogd
   615 ? 00:00:00 upstart-socket-
   643 ? 00:00:00 dbus-daemon
   649 ? 00:00:00 kvm-irqfd-clean
   725 ? 00:00:00 modem-manager
   737 ? 00:00:00 bluetoothd
   753 ? 00:00:00 systemd-logind
   758 ? 00:00:00 krfcommd
   763 ? 00:00:00 avahi-daemon
   765 ? 00:00:00 avahi-daemon
   828 ? 00:00:00 cupsd
   835 ? 00:00:00 NetworkManager
   880 tty4 00:00:00 getty
   888 tty5 00:00:00 getty
   896 ? 00:00:00 polkitd
   900 tty2 00:00:00 getty
   901 tty3 00:00:00 getty
   904 tty6 00:00:00 getty
   925 ? 00:00:00 iprt
   931 ? 00:00:00 cups-browsed
   937 ? 00:00:00 acpid
   939 ? 00:00:00 cron
   940 ? 00:00:00 atd
   999 ? 00:00:00 lightdm
  1081 tty7 00:00:01 Xorg
  1127 ? 00:00:00 apache2
  1130 ? 00:00:00 apache2
  1131 ? 00:00:00 apache2
  1213 ? 00:00:00 dhclient
  1249 tty1 00:00:00 getty
  1263 ? 00:00:00 dnsmasq
  1293 ? 00:00:00 accounts-daemon
  1410 ? 00:00:00 kauditd
  1441 ? 00:00:00 upowerd
  1492 ? 00:00:00 console-kit-dae
  1711 ? 00:00:00 lightdm
  1744 ? 00:00:00 gnome-keyring-d
  1746 ? 00:00:00 init
  1803 ? 00:00:00 sh
  1804 ? 00:00:00 gpg-agent
  1806 ? 00:00:00 sleep
  1808 ? 00:00:00 ssh-agent
  1811 ? 00:00:00 dbus-daemon
  1816 ? 00:00:00 upstart-event-b
  1829 ? 00:00:00 upstart-file-br
  1830 ? 00:00:00 upstart-dbus-br
  1832 ? 00:00:00 startkde
  1838 ? 00:00:00 upstart-dbus-br
  1859 ? 00:00:00 udisks-daemon
  1860 ? 00:00:00 udisks-daemon
  1887 ? 00:00:00 start_kdeinit
  1888 ? 00:00:00 kdeinit4
  1889 ? 00:00:00 klauncher
  1891 ? 00:00:00 kded4
  1895 ? 00:00:00 kglobalaccel
  1902 ? 00:00:00 colord
  1906 ? 00:00:00 kactivitymanage
  1908 ? 00:00:00 kwrapper4
  1909 ? 00:00:00 ksmserver
  1915 ? 00:00:00 udisksd
  1936 ? 00:00:00 systemd-shim
  1940 ? 00:00:05 kwin
  1949 ? 00:00:04 plasma-desktop
  1952 ? 00:00:00 knotify4
  1958 ? 00:00:00 kuiserver
  1960 ? 00:00:00 mission-control
  1965 ? 00:00:00 dbus-daemon <defunct>
  1967 ? 00:00:00 kio_trash
  1968 ? 00:00:00 kio_http
  1981 ? 00:00:00 nepomukserver
  1985 ? 00:00:00 nepomukstorage
  1986 ? 00:00:01 krunner
  1990 ? 00:00:00 pulseaudio
  1992 ? 00:00:00 rtkit-daemon
  1993 ? 00:00:00 kmix
  2016 ? 00:00:00 klipper
  2018 ? 00:00:00 polkit-kde-auth
  2020 ? 00:00:05 virtuoso-t
  2043 ? 00:00:00 konsole
  2050 pts/7 00:00:00 bash
  2107 ? 00:00:02 nepomukfilewatc
  2109 ? 00:00:00 nepomukfileinde
  2124 ? 00:00:00 kio_trash
  2131 pts/7 00:00:00 ps

And here's the output of ps -A after i have started jitsi having jitsi running:

   PID TTY TIME CMD
     1 ? 00:00:01 init
     2 ? 00:00:00 kthreadd
     3 ? 00:00:00 ksoftirqd/0
     4 ? 00:00:00 kworker/0:0
     5 ? 00:00:00 kworker/0:0H
     6 ? 00:00:00 kworker/u8:0
     7 ? 00:00:00 migration/0
     8 ? 00:00:00 rcu_bh
     9 ? 00:00:00 rcuob/0
    10 ? 00:00:00 rcuob/1
    11 ? 00:00:00 rcuob/2
    12 ? 00:00:00 rcuob/3
    13 ? 00:00:00 rcu_sched
    14 ? 00:00:00 rcuos/0
    15 ? 00:00:00 rcuos/1
    16 ? 00:00:00 rcuos/2
    17 ? 00:00:00 rcuos/3
    18 ? 00:00:00 watchdog/0
    19 ? 00:00:00 watchdog/1
    20 ? 00:00:00 migration/1
    21 ? 00:00:00 ksoftirqd/1
    22 ? 00:00:00 kworker/1:0
    23 ? 00:00:00 kworker/1:0H
    24 ? 00:00:00 khelper
    25 ? 00:00:00 kdevtmpfs
    26 ? 00:00:00 netns
    27 ? 00:00:00 writeback
    28 ? 00:00:00 kintegrityd
    29 ? 00:00:00 bioset
    30 ? 00:00:00 kworker/u9:0
    31 ? 00:00:00 kblockd
    32 ? 00:00:00 ata_sff
    33 ? 00:00:00 khubd
    34 ? 00:00:00 md
    35 ? 00:00:00 devfreq_wq
    36 ? 00:00:00 kworker/0:1
    37 ? 00:00:00 kworker/1:1
    38 ? 00:00:00 khungtaskd
    39 ? 00:00:00 kswapd0
    40 ? 00:00:00 ksmd
    41 ? 00:00:00 khugepaged
    42 ? 00:00:00 fsnotify_mark
    43 ? 00:00:00 ecryptfs-kthrea
    44 ? 00:00:00 crypto
    56 ? 00:00:00 kthrotld
    57 ? 00:00:00 kworker/u8:1
    77 ? 00:00:00 deferwq
    78 ? 00:00:00 charger_manager
    79 ? 00:00:00 kworker/1:2
   122 ? 00:00:00 firewire
   123 ? 00:00:00 scsi_eh_0
   124 ? 00:00:00 scsi_eh_1
   125 ? 00:00:00 kworker/u8:2
   126 ? 00:00:00 kworker/u8:3
   127 ? 00:00:00 scsi_eh_2
   128 ? 00:00:00 scsi_eh_3
   129 ? 00:00:00 scsi_eh_4
   130 ? 00:00:00 scsi_eh_5
   131 ? 00:00:00 scsi_eh_6
   132 ? 00:00:00 scsi_eh_7
   133 ? 00:00:00 kworker/u8:4
   134 ? 00:00:00 kworker/u8:5
   135 ? 00:00:00 kworker/u8:6
   136 ? 00:00:00 kworker/u8:7
   137 ? 00:00:00 kworker/u8:8
   138 ? 00:00:00 kworker/u8:9
   139 ? 00:00:00 scsi_eh_8
   140 ? 00:00:00 scsi_eh_9
   141 ? 00:00:00 kworker/u8:10
   142 ? 00:00:00 kworker/u8:11
   194 ? 00:00:00 kjournald
   324 ? 00:00:00 upstart-udev-br
   343 ? 00:00:00 systemd-udevd
   383 ? 00:00:00 kworker/u9:1
   384 ? 00:00:00 kjournald
   400 ? 00:00:00 kjournald
   487 ? 00:00:00 hd-audio0
   505 ? 00:00:00 upstart-file-br
   584 ? 00:00:00 rsyslogd
   615 ? 00:00:00 upstart-socket-
   643 ? 00:00:00 dbus-daemon
   649 ? 00:00:00 kvm-irqfd-clean
   725 ? 00:00:00 modem-manager
   737 ? 00:00:00 bluetoothd
   753 ? 00:00:00 systemd-logind
   758 ? 00:00:00 krfcommd
   763 ? 00:00:00 avahi-daemon
   765 ? 00:00:00 avahi-daemon
   828 ? 00:00:00 cupsd
   835 ? 00:00:00 NetworkManager
   880 tty4 00:00:00 getty
   888 tty5 00:00:00 getty
   896 ? 00:00:00 polkitd
   900 tty2 00:00:00 getty
   901 tty3 00:00:00 getty
   904 tty6 00:00:00 getty
   925 ? 00:00:00 iprt
   931 ? 00:00:00 cups-browsed
   937 ? 00:00:00 acpid
   939 ? 00:00:00 cron
   940 ? 00:00:00 atd
   999 ? 00:00:00 lightdm
  1081 tty7 00:00:03 Xorg
  1127 ? 00:00:00 apache2
  1130 ? 00:00:00 apache2
  1131 ? 00:00:00 apache2
  1213 ? 00:00:00 dhclient
  1249 tty1 00:00:00 getty
  1263 ? 00:00:00 dnsmasq
  1293 ? 00:00:00 accounts-daemon
  1410 ? 00:00:00 kauditd
  1441 ? 00:00:00 upowerd
  1492 ? 00:00:00 console-kit-dae
  1711 ? 00:00:00 lightdm
  1744 ? 00:00:00 gnome-keyring-d
  1746 ? 00:00:00 init
  1804 ? 00:00:00 gpg-agent
  1808 ? 00:00:00 ssh-agent
  1811 ? 00:00:00 dbus-daemon
  1816 ? 00:00:00 upstart-event-b
  1829 ? 00:00:00 upstart-file-br
  1830 ? 00:00:00 upstart-dbus-br
  1832 ? 00:00:00 startkde
  1838 ? 00:00:00 upstart-dbus-br
  1859 ? 00:00:00 udisks-daemon
  1860 ? 00:00:00 udisks-daemon
  1887 ? 00:00:00 start_kdeinit
  1888 ? 00:00:00 kdeinit4
  1889 ? 00:00:00 klauncher
  1891 ? 00:00:01 kded4
  1895 ? 00:00:00 kglobalaccel
  1902 ? 00:00:00 colord
  1906 ? 00:00:00 kactivitymanage
  1908 ? 00:00:00 kwrapper4
  1909 ? 00:00:00 ksmserver
  1915 ? 00:00:00 udisksd
  1936 ? 00:00:00 systemd-shim
  1940 ? 00:00:06 kwin
  1949 ? 00:00:05 plasma-desktop
  1952 ? 00:00:00 knotify4
  1958 ? 00:00:00 kuiserver
  1960 ? 00:00:00 mission-control
  1965 ? 00:00:00 dbus-daemon <defunct>
  1967 ? 00:00:00 kio_trash
  1968 ? 00:00:00 kio_http
  1981 ? 00:00:00 nepomukserver
  1985 ? 00:00:00 nepomukstorage
  1986 ? 00:00:01 krunner
  1990 ? 00:00:00 pulseaudio
  1992 ? 00:00:00 rtkit-daemon
  1993 ? 00:00:00 kmix
  2016 ? 00:00:00 klipper
  2018 ? 00:00:00 polkit-kde-auth
  2020 ? 00:00:05 virtuoso-t
  2043 ? 00:00:00 konsole
  2050 pts/7 00:00:00 bash
  2107 ? 00:00:02 nepomukfilewatc
  2109 ? 00:00:00 nepomukfileinde
  2124 ? 00:00:00 kio_trash
  2148 ? 00:00:11 java
  2206 ? 00:00:00 gvfsd
  2238 pts/7 00:00:00 ps

And that one is after jitsi is ended/quited:

   PID TTY TIME CMD
     1 ? 00:00:01 init
     2 ? 00:00:00 kthreadd
     3 ? 00:00:00 ksoftirqd/0
     4 ? 00:00:00 kworker/0:0
     5 ? 00:00:00 kworker/0:0H
     6 ? 00:00:00 kworker/u8:0
     7 ? 00:00:00 migration/0
     8 ? 00:00:00 rcu_bh
     9 ? 00:00:00 rcuob/0
    10 ? 00:00:00 rcuob/1
    11 ? 00:00:00 rcuob/2
    12 ? 00:00:00 rcuob/3
    13 ? 00:00:00 rcu_sched
    14 ? 00:00:00 rcuos/0
    15 ? 00:00:00 rcuos/1
    16 ? 00:00:00 rcuos/2
    17 ? 00:00:00 rcuos/3
    18 ? 00:00:00 watchdog/0
    19 ? 00:00:00 watchdog/1
    20 ? 00:00:00 migration/1
    21 ? 00:00:00 ksoftirqd/1
    22 ? 00:00:00 kworker/1:0
    23 ? 00:00:00 kworker/1:0H
    24 ? 00:00:00 khelper
    25 ? 00:00:00 kdevtmpfs
    26 ? 00:00:00 netns
    27 ? 00:00:00 writeback
    28 ? 00:00:00 kintegrityd
    29 ? 00:00:00 bioset
    30 ? 00:00:00 kworker/u9:0
    31 ? 00:00:00 kblockd
    32 ? 00:00:00 ata_sff
    33 ? 00:00:00 khubd
    34 ? 00:00:00 md
    35 ? 00:00:00 devfreq_wq
    36 ? 00:00:00 kworker/0:1
    37 ? 00:00:00 kworker/1:1
    38 ? 00:00:00 khungtaskd
    39 ? 00:00:00 kswapd0
    40 ? 00:00:00 ksmd
    41 ? 00:00:00 khugepaged
    42 ? 00:00:00 fsnotify_mark
    43 ? 00:00:00 ecryptfs-kthrea
    44 ? 00:00:00 crypto
    56 ? 00:00:00 kthrotld
    57 ? 00:00:00 kworker/u8:1
    77 ? 00:00:00 deferwq
    78 ? 00:00:00 charger_manager
    79 ? 00:00:00 kworker/1:2
   122 ? 00:00:00 firewire
   123 ? 00:00:00 scsi_eh_0
   124 ? 00:00:00 scsi_eh_1
   125 ? 00:00:00 kworker/u8:2
   126 ? 00:00:00 kworker/u8:3
   127 ? 00:00:00 scsi_eh_2
   128 ? 00:00:00 scsi_eh_3
   129 ? 00:00:00 scsi_eh_4
   130 ? 00:00:00 scsi_eh_5
   131 ? 00:00:00 scsi_eh_6
   132 ? 00:00:00 scsi_eh_7
   133 ? 00:00:00 kworker/u8:4
   134 ? 00:00:00 kworker/u8:5
   135 ? 00:00:00 kworker/u8:6
   136 ? 00:00:00 kworker/u8:7
   137 ? 00:00:00 kworker/u8:8
   138 ? 00:00:00 kworker/u8:9
   139 ? 00:00:00 scsi_eh_8
   140 ? 00:00:00 scsi_eh_9
   141 ? 00:00:00 kworker/u8:10
   142 ? 00:00:00 kworker/u8:11
   194 ? 00:00:00 kjournald
   324 ? 00:00:00 upstart-udev-br
   343 ? 00:00:00 systemd-udevd
   383 ? 00:00:00 kworker/u9:1
   384 ? 00:00:00 kjournald
   400 ? 00:00:00 kjournald
   487 ? 00:00:00 hd-audio0
   505 ? 00:00:00 upstart-file-br
   584 ? 00:00:00 rsyslogd
   615 ? 00:00:00 upstart-socket-
   643 ? 00:00:00 dbus-daemon
   649 ? 00:00:00 kvm-irqfd-clean
   725 ? 00:00:00 modem-manager
   737 ? 00:00:00 bluetoothd
   753 ? 00:00:00 systemd-logind
   758 ? 00:00:00 krfcommd
   763 ? 00:00:00 avahi-daemon
   765 ? 00:00:00 avahi-daemon
   828 ? 00:00:00 cupsd
   835 ? 00:00:00 NetworkManager
   880 tty4 00:00:00 getty
   888 tty5 00:00:00 getty
   896 ? 00:00:00 polkitd
   900 tty2 00:00:00 getty
   901 tty3 00:00:00 getty
   904 tty6 00:00:00 getty
   925 ? 00:00:00 iprt
   931 ? 00:00:00 cups-browsed
   937 ? 00:00:00 acpid
   939 ? 00:00:00 cron
   940 ? 00:00:00 atd
   999 ? 00:00:00 lightdm
  1081 tty7 00:00:04 Xorg
  1127 ? 00:00:00 apache2
  1130 ? 00:00:00 apache2
  1131 ? 00:00:00 apache2
  1213 ? 00:00:00 dhclient
  1249 tty1 00:00:00 getty
  1263 ? 00:00:00 dnsmasq
  1293 ? 00:00:00 accounts-daemon
  1410 ? 00:00:00 kauditd
  1441 ? 00:00:00 upowerd
  1492 ? 00:00:00 console-kit-dae
  1711 ? 00:00:00 lightdm
  1746 ? 00:00:00 init
  1804 ? 00:00:00 gpg-agent
  1808 ? 00:00:00 ssh-agent
  1811 ? 00:00:00 dbus-daemon
  1816 ? 00:00:00 upstart-event-b
  1829 ? 00:00:00 upstart-file-br
  1830 ? 00:00:00 upstart-dbus-br
  1832 ? 00:00:00 startkde
  1838 ? 00:00:00 upstart-dbus-br
  1859 ? 00:00:00 udisks-daemon
  1860 ? 00:00:00 udisks-daemon
  1887 ? 00:00:00 start_kdeinit
  1888 ? 00:00:00 kdeinit4
  1889 ? 00:00:00 klauncher
  1891 ? 00:00:01 kded4
  1895 ? 00:00:00 kglobalaccel
  1902 ? 00:00:00 colord
  1906 ? 00:00:00 kactivitymanage
  1908 ? 00:00:00 kwrapper4
  1909 ? 00:00:00 ksmserver
  1915 ? 00:00:00 udisksd
  1936 ? 00:00:00 systemd-shim
  1940 ? 00:00:07 kwin
  1949 ? 00:00:05 plasma-desktop
  1952 ? 00:00:00 knotify4
  1958 ? 00:00:00 kuiserver
  1960 ? 00:00:00 mission-control
  1965 ? 00:00:00 dbus-daemon <defunct>
  1967 ? 00:00:00 kio_trash
  1968 ? 00:00:00 kio_http
  1981 ? 00:00:00 nepomukserver
  1985 ? 00:00:00 nepomukstorage
  1986 ? 00:00:01 krunner
  1990 ? 00:00:01 pulseaudio
  1992 ? 00:00:00 rtkit-daemon
  1993 ? 00:00:00 kmix
  2016 ? 00:00:00 klipper
  2018 ? 00:00:00 polkit-kde-auth
  2020 ? 00:00:05 virtuoso-t
  2043 ? 00:00:01 konsole
  2050 pts/7 00:00:00 bash
  2107 ? 00:00:02 nepomukfilewatc
  2109 ? 00:00:00 nepomukfileinde
  2124 ? 00:00:00 kio_trash
  2206 ? 00:00:00 gvfsd
  2254 pts/7 00:00:00 ps

End of logs.


#2

Try using it with pulseaudio. Make sure you select this in Jitsi after you
install it.

--sent from my mobile

···

On 28 Dec 2013 01:34, "Oliver C." <kreuzritter2000@gmx.de> wrote:

Hello,

when i start Jitsi under Linux/Kubuntu 13.10 all sound output of all other
applications suddenly stops working
and to fix this, the only solution i found so far was rebooting the
computer and rebooting the system.
I was not able to repair the sound output without rebooting the system.
Quiting jitsi doesn't make the sound working again.
I also found out, that this only happens when i start jitsi, so jitsi
messes something up here and the problem is related to jitsi.
It does also not happen with other applications that use Java and sound
output, so i don't think it's the fault of the Oracle JVM (minecraft works
fine with sound and without messing
up the sound settings).

The sound is completely turned off. Even a restart off pulseaudio or using
alsa directly (for example via "mplayer -ao alsa musicfile.mp3") doesn't
work.

The system i am using is the following:

Distribution: Kubuntu 13.10
Kernel: Linux 3.11.0
JVM: java version "1.7.0_45"
Java(TM) SE Runtime Environment (build 1.7.0_45-b18)
Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode)
Sounddriver: snd_emu10k1
Soundcard: Soundblaster Audigy 2
CPU: Core2Duo
Desktop Environment: KDE 4.11.3
KMix: KDE 4.11.3
GPU: Nvidia Geforce GTX 550 Ti
Speakersystem: 5.1 analog active speaker connected to the Audigy 2

I tried both Jitsi clients, the stable version and one of the latest
nightly builds.

stable Version: 2.2.4603.9615
jitsi_2.2-latest_amd64.deb

nightly build Version: 2.3.4973
jitsi_2.3.4973-1_amd64.deb

But the problem happens on both versions.

I hope you can help be somehow.
Below are some logs and other informations you might need or could be
helpful.
I also tried some different audio configurations of jitsi, see below.

I hope you can help me somehow.
If you have questions, ask me.

Best Regards,
Oliver C.

cat /proc/asound/cards

0 [NVidia ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xef000000 irq 17
1 [Audigy2 ]: Audigy2 - SB Audigy 2 Platinum [SB0240P]
                      SB Audigy 2 Platinum [SB0240P] (rev.4,
serial:0x10021102) at 0xd000, irq 18

card 1 (the audigy 2) is the one that i use for sound output.

cat /proc/asound/devices

  1: : sequencer
  2: [ 0- 9]: digital audio playback
  3: [ 0- 8]: digital audio playback
  4: [ 0- 7]: digital audio playback
  5: [ 0- 3]: digital audio playback
  6: [ 0- 3]: hardware dependent
  7: [ 0- 2]: hardware dependent
  8: [ 0- 1]: hardware dependent
  9: [ 0- 0]: hardware dependent
10: [ 0] : control
11: [ 1- 0]: hardware dependent
12: [ 1- 1]: raw midi
13: [ 1- 0]: raw midi
14: [ 1- 4]: digital audio playback
15: [ 1- 4]: digital audio capture
16: [ 1- 3]: digital audio playback
17: [ 1- 2]: digital audio playback
18: [ 1- 2]: digital audio capture
19: [ 1- 1]: digital audio capture
20: [ 1- 0]: digital audio playback
21: [ 1- 0]: digital audio capture
22: [ 1] : control
23: [ 1- 2]: hardware dependent
24: [ 1- 2]: raw midi
25: [ 1- 3]: raw midi
33: : timer

cat /proc/asound/pcm

00-03: HDMI 0 : HDMI 0 : playback 1
00-07: HDMI 0 : HDMI 0 : playback 1
00-08: HDMI 0 : HDMI 0 : playback 1
00-09: HDMI 0 : HDMI 0 : playback 1
01-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture
1
01-01: emu10k1 mic : Mic Capture : capture 1
01-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 :
capture 1
01-03: emu10k1 : Multichannel Playback : playback 1
01-04: p16v : p16v : playback 1 : capture 1

cat /proc/asound/version

Advanced Linux Sound Architecture Driver Version k3.11.0-14-generic.

=====
Jitsi logs:

1. configuration:

Version: 2.2.4603.9615
Audiosystem = PulseAudio
Speaker = Default
notification = Default

jitsi
ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only
playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
02:09:49.811 Schwerwiegend: [13] org.jitsi.impl.neomedia.
device.DeviceConfiguration.error() Failed to register custom Renderer
org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError: /usr/share/jitsi/lib/native/libjnawtrenderer.so:
libjawt.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder
Verzeichnis nicht gefunden
        at java.lang.ClassLoader$NativeLibrary.load(Native Method)
        at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
        at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
        at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
        at java.lang.Runtime.loadLibrary0(Runtime.java:849)
        at java.lang.System.loadLibrary(System.java:1088)
        at org.jitsi.impl.neomedia.jmfext.media.renderer.video.
JAWTRenderer.<clinit>(JAWTRenderer.java:90)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:190)
        at org.jitsi.impl.neomedia.device.DeviceConfiguration.
registerCustomRenderers(DeviceConfiguration.java:815)
        at org.jitsi.impl.neomedia.device.DeviceConfiguration.<
>(DeviceConfiguration.java:288)
        at org.jitsi.impl.neomedia.MediaServiceImpl.<init>(
MediaServiceImpl.java:122)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(
NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(
DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
        at java.lang.Class.newInstance(Class.java:374)
        at org.jitsi.impl.libjitsi.LibJitsiImpl.getService(
LibJitsiImpl.java:132)
        at org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(
LibJitsiOSGiImpl.java:85)
        at org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(
LibJitsi.java:163)
        at org.jitsi.service.libjitsi.LibJitsi.getMediaService(
LibJitsi.java:115)
        at net.java.sip.communicator.impl.neomedia.
NeomediaActivator.start(NeomediaActivator.java:380)
        at org.apache.felix.framework.util.SecureAction.
startActivator(SecureAction.java:629)
        at org.apache.felix.framework.Felix.activateBundle(Felix.
java:1904)
        at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
        at org.apache.felix.framework.Felix.setActiveStartLevel(
Felix.java:1192)
        at org.apache.felix.framework.StartLevelImpl.run(
StartLevelImpl.java:266)
        at java.lang.Thread.run(Thread.java:744)

2. configuration:

Version: 2.2.4603.9615
Audiosystem = PortAudio
Speaker = Audigy 2 Platinum [SB0240P] Multichannel Capture/PT Playback
Notification = Audigy 2 Platinum [SB0240P] Multichannel Capture/PT Playback

jitsi
ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only
playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
02:14:29.577 Schwerwiegend: [13] org.jitsi.impl.neomedia.
device.DeviceConfiguration.error() Failed to register custom Renderer
org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError: /usr/share/jitsi/lib/native/libjnawtrenderer.so:
libjawt.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder
Verzeichnis nicht gefunden
        at java.lang.ClassLoader$NativeLibrary.load(Native Method)
        at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
        at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
        at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
        at java.lang.Runtime.loadLibrary0(Runtime.java:849)
        at java.lang.System.loadLibrary(System.java:1088)
        at org.jitsi.impl.neomedia.jmfext.media.renderer.video.
JAWTRenderer.<clinit>(JAWTRenderer.java:90)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:190)
        at org.jitsi.impl.neomedia.device.DeviceConfiguration.
registerCustomRenderers(DeviceConfiguration.java:815)
        at org.jitsi.impl.neomedia.device.DeviceConfiguration.<
>(DeviceConfiguration.java:288)
        at org.jitsi.impl.neomedia.MediaServiceImpl.<init>(
MediaServiceImpl.java:122)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(
NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(
DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
        at java.lang.Class.newInstance(Class.java:374)
        at org.jitsi.impl.libjitsi.LibJitsiImpl.getService(
LibJitsiImpl.java:132)
        at org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(
LibJitsiOSGiImpl.java:85)
        at org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(
LibJitsi.java:163)
        at org.jitsi.service.libjitsi.LibJitsi.getMediaService(
LibJitsi.java:115)
        at net.java.sip.communicator.impl.neomedia.
NeomediaActivator.start(NeomediaActivator.java:380)
        at org.apache.felix.framework.util.SecureAction.
startActivator(SecureAction.java:629)
        at org.apache.felix.framework.Felix.activateBundle(Felix.
java:1904)
        at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
        at org.apache.felix.framework.Felix.setActiveStartLevel(
Felix.java:1192)
        at org.apache.felix.framework.StartLevelImpl.run(
StartLevelImpl.java:266)
        at java.lang.Thread.run(Thread.java:744)
warning: The VAD has been replaced by a hack pending a complete rewrite
warning: The VAD has been replaced by a hack pending a complete rewrite
warning: The VAD has been replaced by a hack pending a complete rewrite

3. configuration:

Version: 2.2.4603.9615
Audiosystem = PulseAudio
Speaker = SB Audigy2 Platinum Analog Surround 5.1
Notification = SB Audigy2 Platinum Analog Surround 5.1

jitsi
ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only
playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
02:24:23.239 Schwerwiegend: [13] org.jitsi.impl.neomedia.
device.DeviceConfiguration.error() Failed to register custom Renderer
org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError: /usr/share/jitsi/lib/native/libjnawtrenderer.so:
libjawt.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder
Verzeichnis nicht gefunden
        at java.lang.ClassLoader$NativeLibrary.load(Native Method)
        at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
        at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
        at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
        at java.lang.Runtime.loadLibrary0(Runtime.java:849)
        at java.lang.System.loadLibrary(System.java:1088)
        at org.jitsi.impl.neomedia.jmfext.media.renderer.video.
JAWTRenderer.<clinit>(JAWTRenderer.java:90)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:190)
        at org.jitsi.impl.neomedia.device.DeviceConfiguration.
registerCustomRenderers(DeviceConfiguration.java:815)
        at org.jitsi.impl.neomedia.device.DeviceConfiguration.<
>(DeviceConfiguration.java:288)
        at org.jitsi.impl.neomedia.MediaServiceImpl.<init>(
MediaServiceImpl.java:122)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(
NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(
DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
        at java.lang.Class.newInstance(Class.java:374)
        at org.jitsi.impl.libjitsi.LibJitsiImpl.getService(
LibJitsiImpl.java:132)
        at org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(
LibJitsiOSGiImpl.java:85)
        at org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(
LibJitsi.java:163)
        at org.jitsi.service.libjitsi.LibJitsi.getMediaService(
LibJitsi.java:115)
        at net.java.sip.communicator.impl.neomedia.
NeomediaActivator.start(NeomediaActivator.java:380)
        at org.apache.felix.framework.util.SecureAction.
startActivator(SecureAction.java:629)
        at org.apache.felix.framework.Felix.activateBundle(Felix.
java:1904)
        at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
        at org.apache.felix.framework.Felix.setActiveStartLevel(
Felix.java:1192)
        at org.apache.felix.framework.StartLevelImpl.run(
StartLevelImpl.java:266)
        at java.lang.Thread.run(Thread.java:744)

4. configuration: (nightly build!)

Version: 2.3.4973 (nightly build)
Audiosystem = PulseAudio
Speaker = SB Audigy2 Platinum Analog Surround 5.1
Notification = SB Audigy2 Platinum Analog Surround 5.1

jitsi
ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only
playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
02:46:41.575 Schwerwiegend: [13] org.jitsi.impl.neomedia.
device.DeviceConfiguration.error() Failed to register custom Renderer
org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError: /usr/share/jitsi/lib/native/libjnawtrenderer.so:
libjawt.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder
Verzeichnis nicht gefunden
        at java.lang.ClassLoader$NativeLibrary.load(Native Method)
        at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
        at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
        at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
        at java.lang.Runtime.loadLibrary0(Runtime.java:849)
        at java.lang.System.loadLibrary(System.java:1088)
        at org.jitsi.impl.neomedia.jmfext.media.renderer.video.
JAWTRenderer.<clinit>(JAWTRenderer.java:90)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:190)
        at org.jitsi.impl.neomedia.device.DeviceConfiguration.
registerCustomRenderers(DeviceConfiguration.java:1028)
        at org.jitsi.impl.neomedia.device.DeviceConfiguration.<
>(DeviceConfiguration.java:355)
        at org.jitsi.impl.neomedia.MediaServiceImpl.<init>(
MediaServiceImpl.java:141)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(
NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(
DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
        at java.lang.Class.newInstance(Class.java:374)
        at org.jitsi.impl.libjitsi.LibJitsiImpl.getService(
LibJitsiImpl.java:133)
        at org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(LibJitsiOSGiImpl.java:86)

        at org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(LibJitsi.java:163)

        at org.jitsi.service.libjitsi.LibJitsi.getMediaService(
LibJitsi.java:115)
        at net.java.sip.communicator.impl.neomedia.
NeomediaActivator.start(NeomediaActivator.java:380)
        at org.apache.felix.framework.util.SecureAction.
startActivator(SecureAction.java:629)
        at org.apache.felix.framework.Felix.activateBundle(Felix.
java:1904)
        at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
        at org.apache.felix.framework.Felix.setActiveStartLevel(
Felix.java:1192)
        at org.apache.felix.framework.StartLevelImpl.run(
StartLevelImpl.java:266)
        at java.lang.Thread.run(Thread.java:744)

lspci -vv:

00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller (rev 02)
    Subsystem: Gigabyte Technology Co., Ltd Device 5000
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI
Express Root Port (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000a000-0000afff
    Memory behind bridge: ec000000-efffffff
    Prefetchable memory behind bridge: 00000000d8000000-00000000e7ffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Gigabyte Technology Co., Ltd Device 5004
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 4: I/O ports at e000 [size=32]
    Capabilities: <access denied>
    Kernel driver in use: uhci_hcd

00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Gigabyte Technology Co., Ltd Device 5004
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 21
    Region 4: I/O ports at e100 [size=32]
    Capabilities: <access denied>
    Kernel driver in use: uhci_hcd

00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Gigabyte Technology Co., Ltd Device 5004
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 4: I/O ports at e500 [size=32]
    Capabilities: <access denied>
    Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02) (prog-if 20 [EHCI])
    Subsystem: Gigabyte Technology Co., Ltd Device 5006
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at f2300000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 00009000-00009fff
    Memory behind bridge: f2400000-f25fffff
    Prefetchable memory behind bridge: 00000000f2600000-00000000f27fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: f2000000-f20fffff
    Prefetchable memory behind bridge: 00000000f2800000-00000000f29fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: f0000000-f1ffffff
    Prefetchable memory behind bridge: 00000000f2a00000-00000000f2cfffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Gigabyte Technology Co., Ltd Device 5004
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 4: I/O ports at e200 [size=32]
    Capabilities: <access denied>
    Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Gigabyte Technology Co., Ltd Device 5004
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 19
    Region 4: I/O ports at e300 [size=32]
    Capabilities: <access denied>
    Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Gigabyte Technology Co., Ltd Device 5004
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 4: I/O ports at e400 [size=32]
    Capabilities: <access denied>
    Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02) (prog-if 20 [EHCI])
    Subsystem: Gigabyte Technology Co., Ltd Device 5006
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at f2301000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if
01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: f2100000-f21fffff
    Prefetchable memory behind bridge: 00000000f2200000-00000000f22fffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface
Controller (rev 02)
    Subsystem: Gigabyte Technology Co., Ltd Device 5001
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>
    Kernel driver in use: lpc_ich

00:1f.2 SATA controller: Intel Corporation 82801IB (ICH9) 4 port SATA
Controller [AHCI mode] (rev 02) (prog-if 01 [AHCI 1.0])
    Subsystem: Gigabyte Technology Co., Ltd Device b005
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 44
    Region 0: I/O ports at e600 [size=8]
    Region 1: I/O ports at e700 [size=4]
    Region 2: I/O ports at e800 [size=8]
    Region 3: I/O ports at e900 [size=4]
    Region 4: I/O ports at ea00 [size=32]
    Region 5: Memory at f2302000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>
    Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
(rev 02)
    Subsystem: Gigabyte Technology Co., Ltd Device 5001
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin C routed to IRQ 10
    Region 0: Memory at f2303000 (64-bit, non-prefetchable) [size=256]
    Region 4: I/O ports at 0500 [size=32]

01:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTX
550 Ti] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: eVga.com. Corp. Device 1556
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=32M]
    Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
    Region 3: Memory at e0000000 (64-bit, prefetchable) [size=64M]
    Region 5: I/O ports at a000 [size=128]
    [virtual] Expansion ROM at e4000000 [disabled] [size=512K]
    Capabilities: <access denied>
    Kernel driver in use: nvidia

01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio
Controller (rev a1)
    Subsystem: eVga.com. Corp. Device 1556
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin B routed to IRQ 17
    Region 0: Memory at ef000000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel

03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE
Controller (rev 02) (prog-if 01 [AHCI 1.0])
    Subsystem: Gigabyte Technology Co., Ltd Motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 19
    Region 5: Memory at f2000000 (32-bit, non-prefetchable) [size=8K]
    Capabilities: <access denied>
    Kernel driver in use: ahci

03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller
(rev 02) (prog-if 85 [Master SecO PriO])
    Subsystem: Gigabyte Technology Co., Ltd Motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin B routed to IRQ 16
    Region 0: I/O ports at b000 [size=8]
    Region 1: I/O ports at b100 [size=4]
    Region 2: I/O ports at b200 [size=8]
    Region 3: I/O ports at b300 [size=4]
    Region 4: I/O ports at b400 [size=16]
    Capabilities: <access denied>
    Kernel driver in use: pata_jmicron

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
    Subsystem: Gigabyte Technology Co., Ltd Motherboard
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 45
    Region 0: I/O ports at c000 [size=256]
    Region 2: Memory at f1000000 (64-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at f2a00000 [disabled] [size=128K]
    Capabilities: <access denied>
    Kernel driver in use: r8169

05:00.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)
    Subsystem: Device 1ae4:0003
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (2000ns min, 63750ns max)
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at f2200000 (32-bit, prefetchable) [size=4K]
    Kernel driver in use: Mantis

05:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
    Subsystem: Creative Labs SB Audigy2 Platinum
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (500ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 18
    Region 0: I/O ports at d000 [size=64]
    Capabilities: <access denied>
    Kernel driver in use: snd_emu10k1

05:02.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
    Subsystem: Creative Labs SB Audigy2 MIDI/Game Port
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32
    Region 0: I/O ports at d100 [size=8]
    Capabilities: <access denied>
    Kernel driver in use: Emu10k1_gameport

05:02.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev
04) (prog-if 10 [OHCI])
    Subsystem: Creative Labs SB Audigy FireWire Port
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
    Interrupt: pin B routed to IRQ 16
    Region 0: Memory at f2104000 (32-bit, non-prefetchable) [size=2K]
    Region 1: Memory at f2100000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: firewire_ohci

lsmod:

Module Size Used by
pci_stub 12622 1
vboxpci 23194 0
vboxnetadp 25670 0
vboxnetflt 27613 0
vboxdrv 320455 3 vboxnetadp,vboxnetflt,vboxpci
parport_pc 32701 0
ppdev 17671 0
bnep 19564 2
rfcomm 69070 0
bluetooth 371880 10 bnep,rfcomm
snd_emu10k1_synth 17293 0
snd_emux_synth 42767 1 snd_emu10k1_synth
snd_seq_midi_emul 17744 1 snd_emux_synth
snd_seq_virmidi 13420 1 snd_emux_synth
lnbp21 12942 1
stb6100 13522 1
stb0899 40666 1
coretemp 13435 0
kvm_intel 138538 0
kvm 431315 1 kvm_intel
snd_hda_codec_hdmi 41117 4
gpio_ich 13476 0
snd_emu10k1 161168 12 snd_emu10k1_synth
binfmt_misc 17468 1
snd_util_mem 14117 2 snd_emux_synth,snd_emu10k1
snd_ac97_codec 130236 1 snd_emu10k1
snd_hda_intel 48171 2
nvidia 9451814 65
microcode 23518 0
ac97_bus 12730 1 snd_ac97_codec
lpc_ich 21080 0
snd_hda_codec 188738 2 snd_hda_codec_hdmi,snd_hda_intel
emu10k1_gp 12613 0
snd_hwdep 13602 3 snd_hda_codec,snd_emux_synth,snd_emu10k1
serio_raw 13413 0
snd_seq_midi 13324 0
mantis 23317 0
gameport 15435 2 emu10k1_gp
snd_seq_midi_event 14899 2 snd_seq_virmidi,snd_seq_midi
mantis_core 40086 1 mantis
snd_rawmidi 30095 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
dvb_core 117436 1 mantis_core
snd_seq 61560 5 snd_seq_midi_event,snd_emux_
synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi
snd_pcm 102033 8 snd_ac97_codec,snd_hda_codec_
hdmi,snd_hda_codec,snd_hda_intel,snd_emu10k1
snd_seq_device 14497 5 snd_seq,snd_rawmidi,snd_
emu10k1_synth,snd_emu10k1,snd_seq_midi
snd_page_alloc 18710 3 snd_pcm,snd_hda_intel,snd_emu10k1
snd_timer 29433 6 snd_pcm,snd_seq,snd_emu10k1
drm 296739 2 nvidia
snd 69141 36 snd_ac97_codec,snd_hwdep,snd_
timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_
emu10k1_synth,snd_hda_codec,snd_hda_intel,snd_emux_synth,
snd_seq_virmidi,snd_emu10k1,snd_seq_device,snd_seq_midi_emul,snd_seq_midi
soundcore 12680 1 snd
mac_hid 13205 0
lp 17759 0
parport 42299 3 lp,ppdev,parport_pc
pata_acpi 13038 0
hid_generic 12548 0
usbhid 53014 0
hid 105818 2 hid_generic,usbhid
firewire_ohci 40060 0
firewire_core 64476 1 firewire_ohci
crc_itu_t 12707 1 firewire_core
r8169 67341 0
mii 13934 1 r8169
pata_jmicron 12758 0
ahci 25819 4
libahci 31898 1 ahci

dmesg:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-14-generic (buildd@allspice) (gcc
version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #21-Ubuntu SMP Tue Nov 12
17:04:55 UTC 2013 (Ubuntu 3.11.0-14.21-generic 3.11.7)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-14-generic
root=UUID=c0c306a0-dc8e-43f0-8d8f-b6992bfff41e ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff]
usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7edffff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7ee0000-0x00000000d7ee2fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d7ee3000-0x00000000d7eeffff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d7ef0000-0x00000000d7efffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e8000000-0x00000000ebffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000227ffffff]
usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. P35-DS3/P35-DS3, BIOS
F14 06/18/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x228000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D8000000 mask FF8000000 uncachable
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 230000000 mask FF0000000 uncachable
[ 0.000000] 6 base 228000000 mask FF8000000 uncachable
[ 0.000000] 7 base 0D7F00000 mask FFFF00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 3456MB, range: 128MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 5, base: 8960MB, range: 256MB, type UC
[ 0.000000] reg 6, base: 8832MB, range: 128MB, type UC
[ 0.000000] reg 7, base: 3455MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 8191M
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 8 lose
cover RAM: 4739M
[ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 8
lose cover RAM: 4739M
[ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 8
lose cover RAM: 4739M
[ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 8
lose cover RAM: 4739M
[ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 8 lose
cover RAM: 4739M
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 8
lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 64K chunk_size: 256M num_reg: 8
lose cover RAM: -128M
[ 0.000000] *BAD*gran_size: 64K chunk_size: 512M num_reg: 8
lose cover RAM: -256M
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 8 lose
cover RAM: 0G
[ 0.000000] *BAD*gran_size: 64K chunk_size: 2G num_reg: 8
lose cover RAM: -1G
[ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 8
lose cover RAM: 4739M
[ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 8
lose cover RAM: 4739M
[ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 8
lose cover RAM: 4739M
[ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 8 lose
cover RAM: 4739M
[ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 8
lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 8
lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 8
lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 8
lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 128K chunk_size: 256M num_reg: 8
lose cover RAM: -128M
[ 0.000000] *BAD*gran_size: 128K chunk_size: 512M num_reg: 8
lose cover RAM: -256M
[ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 8 lose
cover RAM: 0G
[ 0.000000] *BAD*gran_size: 128K chunk_size: 2G num_reg: 8
lose cover RAM: -1G
[ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 8
lose cover RAM: 4739M
[ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 8
lose cover RAM: 4739M
[ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 8 lose
cover RAM: 4739M
[ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 8
lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 8
lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 8
lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 8
lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 256K chunk_size: 256M num_reg: 8
lose cover RAM: -128M
[ 0.000000] *BAD*gran_size: 256K chunk_size: 512M num_reg: 8
lose cover RAM: -256M
[ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 8 lose
cover RAM: 0G
[ 0.000000] *BAD*gran_size: 256K chunk_size: 2G num_reg: 8
lose cover RAM: -1G
[ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 8
lose cover RAM: 4739M
[ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 8 lose
cover RAM: 4739M
[ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 8
lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 8
lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 8
lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 8
lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 512K chunk_size: 256M num_reg: 8
lose cover RAM: -128M
[ 0.000000] *BAD*gran_size: 512K chunk_size: 512M num_reg: 8
lose cover RAM: -256M
[ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 8 lose
cover RAM: 0G
[ 0.000000] *BAD*gran_size: 512K chunk_size: 2G num_reg: 8
lose cover RAM: -1G
[ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 8 lose cover
RAM: 4739M
[ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 8 lose cover
RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 8 lose cover
RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 8 lose cover
RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 8 lose
cover RAM: 0G
[ 0.000000] *BAD*gran_size: 1M chunk_size: 256M num_reg: 8
lose cover RAM: -128M
[ 0.000000] *BAD*gran_size: 1M chunk_size: 512M num_reg: 8
lose cover RAM: -256M
[ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 8 lose cover
RAM: 0G
[ 0.000000] *BAD*gran_size: 1M chunk_size: 2G num_reg: 8
lose cover RAM: -1G
[ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 8 lose cover
RAM: 4739M
[ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 8 lose cover
RAM: 1M
[ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 8 lose cover
RAM: 1M
[ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 8 lose
cover RAM: 1M
[ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 8 lose
cover RAM: 1M
[ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 8 lose
cover RAM: 1M
[ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 8 lose
cover RAM: 1M
[ 0.000000] *BAD*gran_size: 2M chunk_size: 256M num_reg: 8
lose cover RAM: -127M
[ 0.000000] *BAD*gran_size: 2M chunk_size: 512M num_reg: 8
lose cover RAM: -255M
[ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 8 lose cover
RAM: 1M
[ 0.000000] *BAD*gran_size: 2M chunk_size: 2G num_reg: 8
lose cover RAM: -1023M
[ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 8 lose cover
RAM: 4739M
[ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 8 lose cover
RAM: 3M
[ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 8 lose
cover RAM: 3M
[ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 8 lose
cover RAM: 3M
[ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 8 lose
cover RAM: 3M
[ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 8 lose
cover RAM: 3M
[ 0.000000] *BAD*gran_size: 4M chunk_size: 256M num_reg: 8
lose cover RAM: -125M
[ 0.000000] *BAD*gran_size: 4M chunk_size: 512M num_reg: 8
lose cover RAM: -253M
[ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 8 lose cover
RAM: 3M
[ 0.000000] *BAD*gran_size: 4M chunk_size: 2G num_reg: 8
lose cover RAM: -1021M
[ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 8 lose cover
RAM: 647M
[ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 8 lose
cover RAM: 7M
[ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 8 lose
cover RAM: 7M
[ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 8 lose
cover RAM: 7M
[ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 8 lose
cover RAM: 7M
[ 0.000000] *BAD*gran_size: 8M chunk_size: 256M num_reg: 8
lose cover RAM: -121M
[ 0.000000] *BAD*gran_size: 8M chunk_size: 512M num_reg: 8
lose cover RAM: -249M
[ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 8 lose cover
RAM: 7M
[ 0.000000] *BAD*gran_size: 8M chunk_size: 2G num_reg: 8
lose cover RAM: -1017M
[ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 8 lose
cover RAM: 143M
[ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 8 lose
cover RAM: 15M
[ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 8 lose
cover RAM: 15M
[ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 8
lose cover RAM: 15M
[ 0.000000] *BAD*gran_size: 16M chunk_size: 256M num_reg: 8
lose cover RAM: -113M
[ 0.000000] *BAD*gran_size: 16M chunk_size: 512M num_reg: 8
lose cover RAM: -241M
[ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 8 lose
cover RAM: 15M
[ 0.000000] *BAD*gran_size: 16M chunk_size: 2G num_reg: 8
lose cover RAM: -1009M
[ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 8 lose
cover RAM: 31M
[ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 8 lose
cover RAM: 31M
[ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 8
lose cover RAM: 31M
[ 0.000000] *BAD*gran_size: 32M chunk_size: 256M num_reg: 8
lose cover RAM: -97M
[ 0.000000] *BAD*gran_size: 32M chunk_size: 512M num_reg: 8
lose cover RAM: -225M
[ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 8 lose
cover RAM: 31M
[ 0.000000] *BAD*gran_size: 32M chunk_size: 2G num_reg: 8
lose cover RAM: -993M
[ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 7 lose
cover RAM: 63M
[ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 8
lose cover RAM: 63M
[ 0.000000] *BAD*gran_size: 64M chunk_size: 256M num_reg: 8
lose cover RAM: -65M
[ 0.000000] *BAD*gran_size: 64M chunk_size: 512M num_reg: 8
lose cover RAM: -193M
[ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 8 lose
cover RAM: 63M
[ 0.000000] *BAD*gran_size: 64M chunk_size: 2G num_reg: 8
lose cover RAM: -961M
[ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 6
lose cover RAM: 127M
[ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 7
lose cover RAM: 127M
[ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 8
lose cover RAM: 127M
[ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 7 lose
cover RAM: 127M
[ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 8 lose
cover RAM: 127M
[ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 5
lose cover RAM: 255M
[ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 6
lose cover RAM: 255M
[ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 6 lose
cover RAM: 255M
[ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 7 lose
cover RAM: 255M
[ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 4
lose cover RAM: 511M
[ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 5 lose
cover RAM: 511M
[ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 6 lose
cover RAM: 511M
[ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 3 lose cover
RAM: 1023M
[ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 3 lose cover
RAM: 1023M
[ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 2 lose cover
RAM: 2047M
[ 0.000000] mtrr_cleanup: can not find optimal value
[ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[ 0.000000] e820: update [mem 0xd7f00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xd7ee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5160-0x000f516f] mapped at
[ffff8800000f5160]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size
24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x227e00000-0x227ffffff]
[ 0.000000] [mem 0x227e00000-0x227ffffff] page 2M
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x224000000-0x227dfffff]
[ 0.000000] [mem 0x224000000-0x227dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x223ffffff]
[ 0.000000] [mem 0x200000000-0x223ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xd7edffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xd7dfffff] page 2M
[ 0.000000] [mem 0xd7e00000-0xd7edffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35072000-0x36830fff]
[ 0.000000] ACPI: RSDP 00000000000f6b50 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000d7ee3040 00038 (v01 GBT GBTUACPI
42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000d7ee30c0 00074 (v01 GBT GBTUACPI
42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000d7ee3180 04B2A (v01 GBT GBTUACPI
00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000d7ee0000 00040
[ 0.000000] ACPI: HPET 00000000d7ee7e00 00038 (v01 GBT GBTUACPI
42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000d7ee7e80 0003C (v01 GBT GBTUACPI
42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000d7ee7d00 00084 (v01 GBT GBTUACPI
42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000d7ee8520 003AB (v01 PmRef CpuPm
00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-
0x0000000227ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x227ffffff]
[ 0.000000] NODE_DATA [mem 0x227ff5000-0x227ff9fff]
[ 0.000000] [ffffea0000000000-ffffea00089fffff] PMD ->
[ffff88021f600000-ffff8802275fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x227ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xd7edffff]
[ 0.000000] node 0: [mem 0x100000000-0x227ffffff]
[ 0.000000] On node 0 totalpages: 2096764
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13756 pages used for memmap
[ 0.000000] DMA32 zone: 880352 pages, LIFO batch:31
[ 0.000000] Normal zone: 18944 pages used for memmap
[ 0.000000] Normal zone: 1212416 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7ee0000-0xd7ee2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7ee3000-0xd7eeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7ef0000-0xd7efffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7f00000-0xe7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe8000000-0xebffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xec000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xec000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880227c00000 s86720
r8192 d23872 u524288
[ 0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2063979
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-14-generic
root=UUID=c0c306a0-dc8e-43f0-8d8f-b6992bfff41e ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
bailing!
[ 0.000000] Memory: 8148556K/8387056K available (7143K kernel code,
1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 238500K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2333.158 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4666.31 BogoMIPS (lpj=9332632)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004035] Security Framework initialized
[ 0.004056] AppArmor: AppArmor initialized
[ 0.004057] Yama: becoming mindful.
[ 0.008484] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.011766] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.013335] Mount-cache hash table entries: 256
[ 0.013572] Initializing cgroup subsys memory
[ 0.013587] Initializing cgroup subsys devices
[ 0.013589] Initializing cgroup subsys freezer
[ 0.013591] Initializing cgroup subsys blkio
[ 0.013593] Initializing cgroup subsys perf_event
[ 0.013596] Initializing cgroup subsys hugetlb
[ 0.013621] CPU: Physical Processor ID: 0
[ 0.013622] CPU: Processor Core ID: 0
[ 0.013625] mce: CPU supports 6 MCE banks
[ 0.013632] CPU0: Thermal monitoring enabled (TM2)
[ 0.013639] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.013639] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.013639] tlb_flushall_shift: -1
[ 0.013726] Freeing SMP alternatives memory: 28K (ffffffff81e65000 -
ffffffff81e6c000)
[ 0.016366] ACPI: Core revision 20130517
[ 0.018261] ACPI: All ACPI Tables successfully acquired
[ 0.019480] ftrace: allocating 27804 entries in 109 pages
[ 0.028433] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069586] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @
2.33GHz (fam: 06, model: 0f, stepping: 0b)
[ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events,
Intel PMU driver.
[ 0.072000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.072000] ... version: 2
[ 0.072000] ... bit width: 40
[ 0.072000] ... generic registers: 2
[ 0.072000] ... value mask: 000000ffffffffff
[ 0.072000] ... max period: 000000007fffffff
[ 0.072000] ... fixed-purpose events: 3
[ 0.072000] ... event mask: 0000000700000003
[ 0.072000] smpboot: Booting Node 0, Processors #1
[ 0.083109] Brought up 2 CPUs
[ 0.083113] smpboot: Total of 2 processors activated (9332.63 BogoMIPS)
[ 0.083198] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.084117] devtmpfs: initialized
[ 0.085547] EVM: security.selinux
[ 0.085549] EVM: security.SMACK64
[ 0.085550] EVM: security.capability
[ 0.085577] PM: Registering ACPI NVS region [mem 0xd7ee0000-0xd7ee2fff]
(12288 bytes)
[ 0.085577] regulator-dummy: no parameters
[ 0.085577] RTC time: 23:12:56, date: 12/27/13
[ 0.085577] NET: Registered protocol family 16
[ 0.085577] ACPI: bus type PCI registered
[ 0.085577] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.085577] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xe8000000-0xebffffff] (base 0xe8000000)
[ 0.085577] PCI: MMCONFIG at [mem 0xe8000000-0xebffffff] reserved in
E820
[ 0.089942] PCI: Using configuration type 1 for base access
[ 0.092057] bio: create slab <bio-0> at 0
[ 0.092082] ACPI: Added _OSI(Module Device)
[ 0.092084] ACPI: Added _OSI(Processor Device)
[ 0.092086] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092088] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.092833] ACPI: EC: Look up EC in DSDT
[ 0.095433] ACPI: SSDT 00000000d7ee7f00 0022A (v01 PmRef Cpu0Ist
00003000 INTL 20040311)
[ 0.095614] ACPI: Dynamic OEM Table Load:
[ 0.095617] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist
00003000 INTL 20040311)
[ 0.095707] ACPI: SSDT 00000000d7ee83c0 00152 (v01 PmRef Cpu1Ist
00003000 INTL 20040311)
[ 0.095875] ACPI: Dynamic OEM Table Load:
[ 0.095878] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist
00003000 INTL 20040311)
[ 0.096025] ACPI: Interpreter enabled
[ 0.096031] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20130517/hwxface-571)
[ 0.096036] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20130517/hwxface-571)
[ 0.096050] ACPI: (supports S0 S3 S4 S5)
[ 0.096052] ACPI: Using IOAPIC for interrupt routing
[ 0.096079] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.096170] ACPI: No dock devices found.
[ 0.101009] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.101015] acpi PNP0A03:00: ACPI _OSC support notification failed,
disabling PCIe ASPM
[ 0.101017] acpi PNP0A03:00: Unable to request _OSC control (_OSC
support mask: 0x08)
[ 0.101206] PCI host bridge to bus 0000:00
[ 0.101210] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.101212] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.101214] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.101217] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 0.101219] pci_bus 0000:00: root bus resource [mem
0x000c0000-0x000dffff]
[ 0.101221] pci_bus 0000:00: root bus resource [mem
0xd7f00000-0xfebfffff]
[ 0.101230] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.101329] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.101366] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.101462] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.101501] pci 0000:00:1a.0: reg 0x20: [io 0xe000-0xe01f]
[ 0.101583] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.101618] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.101657] pci 0000:00:1a.1: reg 0x20: [io 0xe100-0xe11f]
[ 0.101737] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.101771] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.101810] pci 0000:00:1a.2: reg 0x20: [io 0xe500-0xe51f]
[ 0.101891] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.101932] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.101948] pci 0000:00:1a.7: reg 0x10: [mem 0xf2300000-0xf23003ff]
[ 0.102059] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.102096] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.102159] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.102212] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.102248] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.102310] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.102363] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.102397] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.102460] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.102513] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.102551] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.102590] pci 0000:00:1d.0: reg 0x20: [io 0xe200-0xe21f]
[ 0.102669] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.102703] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.102741] pci 0000:00:1d.1: reg 0x20: [io 0xe300-0xe31f]
[ 0.102821] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.102854] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.102893] pci 0000:00:1d.2: reg 0x20: [io 0xe400-0xe41f]
[ 0.102972] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.103010] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.103026] pci 0000:00:1d.7: reg 0x10: [mem 0xf2301000-0xf23013ff]
[ 0.103137] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.103171] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.103260] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.103297] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.103369] pci 0000:00:1f.0: address space collision: [io
0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415
flags 0x80000000]
[ 0.103375] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by
ICH6 GPIO
[ 0.103378] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800
(mask 000f)
[ 0.103382] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290
(mask 000f)
[ 0.103487] pci 0000:00:1f.2: [8086:2923] type 00 class 0x010601
[ 0.103504] pci 0000:00:1f.2: reg 0x10: [io 0xe600-0xe607]
[ 0.103512] pci 0000:00:1f.2: reg 0x14: [io 0xe700-0xe703]
[ 0.103519] pci 0000:00:1f.2: reg 0x18: [io 0xe800-0xe807]
[ 0.103527] pci 0000:00:1f.2: reg 0x1c: [io 0xe900-0xe903]
[ 0.103534] pci 0000:00:1f.2: reg 0x20: [io 0xea00-0xea1f]
[ 0.103542] pci 0000:00:1f.2: reg 0x24: [mem 0xf2302000-0xf23027ff]
[ 0.103584] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.103661] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.103675] pci 0000:00:1f.3: reg 0x10: [mem 0xf2303000-0xf23030ff
64bit]
[ 0.103694] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.103820] pci 0000:01:00.0: [10de:1244] type 00 class 0x030000
[ 0.103830] pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xedffffff]
[ 0.103841] pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff
64bit pref]
[ 0.103851] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe3ffffff
64bit pref]
[ 0.103858] pci 0000:01:00.0: reg 0x24: [io 0xa000-0xa07f]
[ 0.103866] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.103938] pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300
[ 0.103948] pci 0000:01:00.1: reg 0x10: [mem 0xef000000-0xef003fff]
[ 0.104057] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.104060] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.104063] pci 0000:00:01.0: bridge window [mem
0xec000000-0xefffffff]
[ 0.104067] pci 0000:00:01.0: bridge window [mem
0xd8000000-0xe7ffffff 64bit pref]
[ 0.104120] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.104124] pci 0000:00:1c.0: ...


#3

Hi Oliver,
I have similar symptoms, but usually only after talking over jitsi for
a while. To me it looks like PortAudio in Jitsi is broken. I didn't get
this problem when using the PulseAudio backend in Jitsi. This is still
annoying though, since I don't want to use PulseAudio and use it for
nothing else.

Regards,
Philipp

···

On Sat, 28 Dec 2013 00:32:47 +0100 "Oliver C." <kreuzritter2000@gmx.de> wrote:

Hello,

when i start Jitsi under Linux/Kubuntu 13.10 all sound output of all
other applications suddenly stops working
and to fix this, the only solution i found so far was rebooting the
computer and rebooting the system.
I was not able to repair the sound output without rebooting the
system. Quiting jitsi doesn't make the sound working again.
I also found out, that this only happens when i start jitsi, so jitsi
messes something up here and the problem is related to jitsi.
It does also not happen with other applications that use Java and
sound output, so i don't think it's the fault of the Oracle JVM
(minecraft works fine with sound and without messing
up the sound settings).

The sound is completely turned off. Even a restart off pulseaudio or
using alsa directly (for example via "mplayer -ao alsa
musicfile.mp3") doesn't work.

The system i am using is the following:

Distribution: Kubuntu 13.10
Kernel: Linux 3.11.0
JVM: java version "1.7.0_45"
Java(TM) SE Runtime Environment (build 1.7.0_45-b18)
Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode)
Sounddriver: snd_emu10k1
Soundcard: Soundblaster Audigy 2
CPU: Core2Duo
Desktop Environment: KDE 4.11.3
KMix: KDE 4.11.3
GPU: Nvidia Geforce GTX 550 Ti
Speakersystem: 5.1 analog active speaker connected to the Audigy 2

I tried both Jitsi clients, the stable version and one of the latest
nightly builds.

stable Version: 2.2.4603.9615
jitsi_2.2-latest_amd64.deb

nightly build Version: 2.3.4973
jitsi_2.3.4973-1_amd64.deb

But the problem happens on both versions.

I hope you can help be somehow.
Below are some logs and other informations you might need or could be
helpful.
I also tried some different audio configurations of jitsi, see below.

I hope you can help me somehow.
If you have questions, ask me.

Best Regards,
  Oliver C.


#4

Hey Philipp,

If you find it annoying then I assume you'd be willing to work on a
direct alsa backend. This would be a welcome contribution!

Emil

···

On Sat, Dec 28, 2013 at 3:56 PM, Philipp Überbacher <murks@tuxfamily.org> wrote:

On Sat, 28 Dec 2013 00:32:47 +0100 > "Oliver C." <kreuzritter2000@gmx.de> wrote:

Hello,

when i start Jitsi under Linux/Kubuntu 13.10 all sound output of all
other applications suddenly stops working
and to fix this, the only solution i found so far was rebooting the
computer and rebooting the system.
I was not able to repair the sound output without rebooting the
system. Quiting jitsi doesn't make the sound working again.
I also found out, that this only happens when i start jitsi, so jitsi
messes something up here and the problem is related to jitsi.
It does also not happen with other applications that use Java and
sound output, so i don't think it's the fault of the Oracle JVM
(minecraft works fine with sound and without messing
up the sound settings).

The sound is completely turned off. Even a restart off pulseaudio or
using alsa directly (for example via "mplayer -ao alsa
musicfile.mp3") doesn't work.

The system i am using is the following:

Distribution: Kubuntu 13.10
Kernel: Linux 3.11.0
JVM: java version "1.7.0_45"
Java(TM) SE Runtime Environment (build 1.7.0_45-b18)
Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode)
Sounddriver: snd_emu10k1
Soundcard: Soundblaster Audigy 2
CPU: Core2Duo
Desktop Environment: KDE 4.11.3
KMix: KDE 4.11.3
GPU: Nvidia Geforce GTX 550 Ti
Speakersystem: 5.1 analog active speaker connected to the Audigy 2

I tried both Jitsi clients, the stable version and one of the latest
nightly builds.

stable Version: 2.2.4603.9615
jitsi_2.2-latest_amd64.deb

nightly build Version: 2.3.4973
jitsi_2.3.4973-1_amd64.deb

But the problem happens on both versions.

I hope you can help be somehow.
Below are some logs and other informations you might need or could be
helpful.
I also tried some different audio configurations of jitsi, see below.

I hope you can help me somehow.
If you have questions, ask me.

Best Regards,
  Oliver C.

Hi Oliver,
I have similar symptoms, but usually only after talking over jitsi for
a while. To me it looks like PortAudio in Jitsi is broken. I didn't get
this problem when using the PulseAudio backend in Jitsi. This is still
annoying though, since I don't want to use PulseAudio and use it for
nothing else.

Regards,
Philipp

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

--
Emil Ivov, Ph.D. 67000 Strasbourg,
Project Lead France
Jitsi
emcho@jitsi.org PHONE: +33.1.77.62.43.30
https://jitsi.org FAX: +33.1.77.62.47.31


#5

Hello Emil,

now i don't know why i sent all the log output and all the other informations. Now i am pretty sure, they were useless.
Take a look at configuration 1, it says "pulseaudio".

The Bug is in the code, there is no way to configure anything to make it working.
In my opinion a bug report should be opened, but the jitsi website said, that this must be discussed on the mailinglist first, that's why i am here.

Best Regards,
  Oliver C.

···

Am 28.12.2013 08:30, schrieb Emil Ivov:

Try using it with pulseaudio. Make sure you select this in Jitsi after you install it.

--sent from my mobile


#6

I might do this. Can you tell me which the relevant files are? It's
hard for me to find my way around such a big project as jitsi.

Regards,
Philipp

···

On Sat, 28 Dec 2013 17:16:46 +0200 Emil Ivov <emcho@jitsi.org> wrote:

Hey Philipp,

If you find it annoying then I assume you'd be willing to work on a
direct alsa backend. This would be a welcome contribution!

Emil


#7

Hey Oliver,

Hello Emil,

now i don't know why i sent all the log output and all the other
informations. Now i am pretty sure, they were useless.

I read your message on a mobile and thought I'd offer a quick guess
based on your initial explanation. There's no reason to think your
efforts were useless, although you may want to consider attaching the
Jitsi logs next time you report an issue (or in case someone asks for
them now):

https://jitsi.org/faq/logs

Also note that Jitsi does work on a number of systems so the problem
could very well be related to some of the specifics of your
environment.

Emil

···

On Sun, Dec 29, 2013 at 6:40 PM, Oliver C. <kreuzritter2000@gmx.de> wrote:

Take a look at configuration 1, it says "pulseaudio".

The Bug is in the code, there is no way to configure anything to make it
working.
In my opinion a bug report should be opened, but the jitsi website said,
that this must be discussed on the mailinglist first, that's why i am here.

Best Regards,
Oliver C.

Am 28.12.2013 08:30, schrieb Emil Ivov:

Try using it with pulseaudio. Make sure you select this in Jitsi after you
install it.

--sent from my mobile

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

--
Emil Ivov, Ph.D. 67000 Strasbourg,
Project Lead France
Jitsi
emcho@jitsi.org PHONE: +33.1.77.62.43.30
https://jitsi.org FAX: +33.1.77.62.47.31


#8

Hey Philipp,

If you find it annoying then I assume you'd be willing to work on a
direct alsa backend. This would be a welcome contribution!

Emil

I might do this.

Excellent!

Can you tell me which the relevant files are? It's
hard for me to find my way around such a big project as jitsi.

libjitsi/src/org/jitsi/impl/neomedia/device

You'll find various examples there for pulseaudio, portaudio and wasapi.

Looking forward to trying your patches!

Emil

···

On Sat, Dec 28, 2013 at 6:39 PM, Philipp Überbacher <murks@tuxfamily.org> wrote:

On Sat, 28 Dec 2013 17:16:46 +0200 > Emil Ivov <emcho@jitsi.org> wrote:

--
https://jitsi.org


#9

Hello Philipp,

a direct alsa backend would be a nice feature to have.
I wish you success with coding it.<http://www.dict.cc/englisch-deutsch/success!.html>

Best Regards,
  Oliver C.

···

Am 28.12.2013 17:39, schrieb Philipp �berbacher:

On Sat, 28 Dec 2013 17:16:46 +0200 > Emil Ivov <emcho@jitsi.org> wrote:

Hey Philipp,

If you find it annoying then I assume you'd be willing to work on a
direct alsa backend. This would be a welcome contribution!

Emil

I might do this. Can you tell me which the relevant files are? It's
hard for me to find my way around such a big project as jitsi.

Regards,
Philipp

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users


#10

Hello Emil,

okay.
I took a look at the FAQ.
Now i added additional logs to this E-mail. It includes logs from the stable and newer nighly builds version.
I hope they can help somehow to find the problem.

BTW, i edited some fields in the logs for privacy reasons, in my opinion, such things like the XMPP account
that was used don't belong into log files.

Best Regards,
  Oliver C.

jitsi_logs.zip (13.4 KB)

···

Am 29.12.2013 17:59, schrieb Emil Ivov:

Hey Oliver,

On Sun, Dec 29, 2013 at 6:40 PM, Oliver C. <kreuzritter2000@gmx.de> wrote:

Hello Emil,

now i don't know why i sent all the log output and all the other
informations. Now i am pretty sure, they were useless.

I read your message on a mobile and thought I'd offer a quick guess
based on your initial explanation. There's no reason to think your
efforts were useless, although you may want to consider attaching the
Jitsi logs next time you report an issue (or in case someone asks for
them now):

https://jitsi.org/faq/logs

Also note that Jitsi does work on a number of systems so the problem
could very well be related to some of the specifics of your
environment.

Emil

Take a look at configuration 1, it says "pulseaudio".

The Bug is in the code, there is no way to configure anything to make it
working.
In my opinion a bug report should be opened, but the jitsi website said,
that this must be discussed on the mailinglist first, that's why i am here.

Best Regards,
  Oliver C.

Am 28.12.2013 08:30, schrieb Emil Ivov:

Try using it with pulseaudio. Make sure you select this in Jitsi after you
install it.

--sent from my mobile

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users


#11

Hello all,

the problem still exist with the new stable version.
I assume that jitsi messes around with the soundcard device number to use.
Does Jitsi assume that the soundcard is always alsa device 0 instead of selecting it wisely?
Is the soundcard number hardcoded?
Maybe this is the bug?

ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
23:11:04.171 Schwerwiegend: [13] org.jitsi.impl.neomedia.device.DeviceConfiguration.error() Failed to register custom Renderer org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError: /usr/share/jitsi/lib/native/libjnawtrenderer.so: libjawt.so: Kann die Shared-Object-Datei nicht �ffnen: Datei oder Verzeichnis nicht gefunden
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
         at java.lang.Runtime.loadLibrary0(Runtime.java:849)
         at java.lang.System.loadLibrary(System.java:1088)
         at org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer.<clinit>(JAWTRenderer.java:90)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:190)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.registerCustomRenderers(DeviceConfiguration.java:1028)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.<init>(DeviceConfiguration.java:355)
         at org.jitsi.impl.neomedia.MediaServiceImpl.<init>(MediaServiceImpl.java:141)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
         at java.lang.Class.newInstance(Class.java:374)
         at org.jitsi.impl.libjitsi.LibJitsiImpl.getService(LibJitsiImpl.java:133)
         at org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(LibJitsiOSGiImpl.java:86)
         at org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(LibJitsi.java:163)
         at org.jitsi.service.libjitsi.LibJitsi.getMediaService(LibJitsi.java:115)
         at net.java.sip.communicator.impl.neomedia.NeomediaActivator.start(NeomediaActivator.java:380)
         at org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)
         at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
         at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
         at org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
         at org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
         at java.lang.Thread.run(Thread.java:744)

Best Regards,
  Oliver C.

···

Am 29.12.2013 18:54, schrieb Oliver C.:

Hello Emil,

okay.
I took a look at the FAQ.
Now i added additional logs to this E-mail. It includes logs from the stable and newer nighly builds version.
I hope they can help somehow to find the problem.

BTW, i edited some fields in the logs for privacy reasons, in my opinion, such things like the XMPP account
that was used don't belong into log files.

Best Regards,
Oliver C.

Am 29.12.2013 17:59, schrieb Emil Ivov:

Hey Oliver,

On Sun, Dec 29, 2013 at 6:40 PM, Oliver C. <kreuzritter2000@gmx.de> >> wrote:

Hello Emil,

now i don't know why i sent all the log output and all the other
informations. Now i am pretty sure, they were useless.

I read your message on a mobile and thought I'd offer a quick guess
based on your initial explanation. There's no reason to think your
efforts were useless, although you may want to consider attaching the
Jitsi logs next time you report an issue (or in case someone asks for
them now):

https://jitsi.org/faq/logs

Also note that Jitsi does work on a number of systems so the problem
could very well be related to some of the specifics of your
environment.

Emil

Take a look at configuration 1, it says "pulseaudio".

The Bug is in the code, there is no way to configure anything to make it
working.
In my opinion a bug report should be opened, but the jitsi website said,
that this must be discussed on the mailinglist first, that's why i am here.

Best Regards,
  Oliver C.

Am 28.12.2013 08:30, schrieb Emil Ivov:

Try using it with pulseaudio. Make sure you select this in Jitsi after you
install it.

--sent from my mobile

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users


#12

Thanks,
I won't make any promises though.

Regards,
Philipp

···

On Sat, 28 Dec 2013 18:50:31 +0200 Emil Ivov <emcho@jitsi.org> wrote:

On Sat, Dec 28, 2013 at 6:39 PM, Philipp Überbacher > <murks@tuxfamily.org> wrote:
> On Sat, 28 Dec 2013 17:16:46 +0200 > > Emil Ivov <emcho@jitsi.org> wrote:
>
>> Hey Philipp,
>>
>> If you find it annoying then I assume you'd be willing to work on a
>> direct alsa backend. This would be a welcome contribution!
>>
>> Emil
>
> I might do this.

Excellent!

> Can you tell me which the relevant files are? It's
> hard for me to find my way around such a big project as jitsi.

libjitsi/src/org/jitsi/impl/neomedia/device

You'll find various examples there for pulseaudio, portaudio and
wasapi.

Looking forward to trying your patches!

Emil


#13

Thanks Oliver,
I took a brief look at the existing code, mostly the PulseAudio
backend, and I have to say that don't know yet what needs to be
done. My guess so far is that I'll need to make an alsa-implementation
of some abstract classes. I'm not sure whether I'll need to deal with
JNI, but I guess so. It's not exactly easy to see how it all fits
together, and there are a lot of things I know nothing about. I guess
I'll start with some tools that create diagrams for me in order to
understand how the existing thing works. In other words, this may take
a while.

Regards,
Philipp

···

On Sun, 29 Dec 2013 17:45:05 +0100 "Oliver C." <kreuzritter2000@gmx.de> wrote:

Hello Philipp,

a direct alsa backend would be a nice feature to have.
I wish you success with coding
it.<http://www.dict.cc/englisch-deutsch/success!.html>

Best Regards,
  Oliver C.


#14

Hello,

I forgot to mention something in my last mail.

I really do wonder why jitsi is trying to access "cards.HDA-Intel.pcm.rear.0:CARD=0" like the logs describe:
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.rear.0:CARD=0'

The sound places on "cards.[sb_audigyname].0:CARD=1"
Card 1 is were music plays, not 0.
Jitsi shouldn't touch card 0.

Best Regards,
Oliver C.

···

Am 12.01.2014 23:16, schrieb Oliver C.:

Hello all,

the problem still exist with the new stable version.
I assume that jitsi messes around with the soundcard device number to use.
Does Jitsi assume that the soundcard is always alsa device 0 instead of selecting it wisely?
Is the soundcard number hardcoded?
Maybe this is the bug?

ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
23:11:04.171 Schwerwiegend: [13] org.jitsi.impl.neomedia.device.DeviceConfiguration.error() Failed to register custom Renderer org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError: /usr/share/jitsi/lib/native/libjnawtrenderer.so: libjawt.so: Kann die Shared-Object-Datei nicht �ffnen: Datei oder Verzeichnis nicht gefunden
        at java.lang.ClassLoader$NativeLibrary.load(Native Method)
        at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
        at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
        at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
        at java.lang.Runtime.loadLibrary0(Runtime.java:849)
        at java.lang.System.loadLibrary(System.java:1088)
        at org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer.<clinit>(JAWTRenderer.java:90)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:190)
        at org.jitsi.impl.neomedia.device.DeviceConfiguration.registerCustomRenderers(DeviceConfiguration.java:1028)
        at org.jitsi.impl.neomedia.device.DeviceConfiguration.<init>(DeviceConfiguration.java:355)
        at org.jitsi.impl.neomedia.MediaServiceImpl.<init>(MediaServiceImpl.java:141)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
        at java.lang.Class.newInstance(Class.java:374)
        at org.jitsi.impl.libjitsi.LibJitsiImpl.getService(LibJitsiImpl.java:133)
        at org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(LibJitsiOSGiImpl.java:86)
        at org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(LibJitsi.java:163)
        at org.jitsi.service.libjitsi.LibJitsi.getMediaService(LibJitsi.java:115)
        at net.java.sip.communicator.impl.neomedia.NeomediaActivator.start(NeomediaActivator.java:380)
        at org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)
        at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
        at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
        at org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
        at org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
        at java.lang.Thread.run(Thread.java:744)

Best Regards,
Oliver C.

Am 29.12.2013 18:54, schrieb Oliver C.:

Hello Emil,

okay.
I took a look at the FAQ.
Now i added additional logs to this E-mail. It includes logs from the stable and newer nighly builds version.
I hope they can help somehow to find the problem.

BTW, i edited some fields in the logs for privacy reasons, in my opinion, such things like the XMPP account
that was used don't belong into log files.

Best Regards,
Oliver C.

Am 29.12.2013 17:59, schrieb Emil Ivov:

Hey Oliver,

On Sun, Dec 29, 2013 at 6:40 PM, Oliver C. <kreuzritter2000@gmx.de> >>> wrote:

Hello Emil,

now i don't know why i sent all the log output and all the other
informations. Now i am pretty sure, they were useless.

I read your message on a mobile and thought I'd offer a quick guess
based on your initial explanation. There's no reason to think your
efforts were useless, although you may want to consider attaching the
Jitsi logs next time you report an issue (or in case someone asks for
them now):

https://jitsi.org/faq/logs

Also note that Jitsi does work on a number of systems so the problem
could very well be related to some of the specifics of your
environment.

Emil

Take a look at configuration 1, it says "pulseaudio".

The Bug is in the code, there is no way to configure anything to make it
working.
In my opinion a bug report should be opened, but the jitsi website said,
that this must be discussed on the mailinglist first, that's why i am here.

Best Regards,
  Oliver C.

Am 28.12.2013 08:30, schrieb Emil Ivov:

Try using it with pulseaudio. Make sure you select this in Jitsi after you
install it.

--sent from my mobile

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users


#15

Hello all,

the problem still exist with the new stable version.
I assume that jitsi messes around with the soundcard device number to use.
Does Jitsi assume that the soundcard is always alsa device 0 instead of
selecting it wisely?
Is the soundcard number hardcoded?

Have you had a look at the audio settings?

Jitsi lists, in its audio settings tab, the devices it retrieves from pulse audio or portaudio. You can see there which one it is using.

Emil

···

On 12.01.14, 23:16, Oliver C. wrote:

Maybe this is the bug?

ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports
only playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
23:11:04.171 Schwerwiegend: [13]
org.jitsi.impl.neomedia.device.DeviceConfiguration.error() Failed to
register custom Renderer
org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError:
/usr/share/jitsi/lib/native/libjnawtrenderer.so: libjawt.so: Kann die
Shared-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
         at java.lang.Runtime.loadLibrary0(Runtime.java:849)
         at java.lang.System.loadLibrary(System.java:1088)
         at
org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer.<clinit>(JAWTRenderer.java:90)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:190)
         at
org.jitsi.impl.neomedia.device.DeviceConfiguration.registerCustomRenderers(DeviceConfiguration.java:1028)
         at
org.jitsi.impl.neomedia.device.DeviceConfiguration.<init>(DeviceConfiguration.java:355)
         at
org.jitsi.impl.neomedia.MediaServiceImpl.<init>(MediaServiceImpl.java:141)
         at
sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at
sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
         at
sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
         at java.lang.Class.newInstance(Class.java:374)
         at
org.jitsi.impl.libjitsi.LibJitsiImpl.getService(LibJitsiImpl.java:133)
         at
org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(LibJitsiOSGiImpl.java:86)
         at
org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(LibJitsi.java:163)
         at
org.jitsi.service.libjitsi.LibJitsi.getMediaService(LibJitsi.java:115)
         at
net.java.sip.communicator.impl.neomedia.NeomediaActivator.start(NeomediaActivator.java:380)
         at
org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)
         at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
         at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
         at
org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
         at
org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
         at java.lang.Thread.run(Thread.java:744)

Best Regards,
  Oliver C.

Am 29.12.2013 18:54, schrieb Oliver C.:

Hello Emil,

okay.
I took a look at the FAQ.
Now i added additional logs to this E-mail. It includes logs from the
stable and newer nighly builds version.
I hope they can help somehow to find the problem.

BTW, i edited some fields in the logs for privacy reasons, in my
opinion, such things like the XMPP account
that was used don't belong into log files.

Best Regards,
Oliver C.

Am 29.12.2013 17:59, schrieb Emil Ivov:

Hey Oliver,

On Sun, Dec 29, 2013 at 6:40 PM, Oliver C. <kreuzritter2000@gmx.de> >>> wrote:

Hello Emil,

now i don't know why i sent all the log output and all the other
informations. Now i am pretty sure, they were useless.

I read your message on a mobile and thought I'd offer a quick guess
based on your initial explanation. There's no reason to think your
efforts were useless, although you may want to consider attaching the
Jitsi logs next time you report an issue (or in case someone asks for
them now):

https://jitsi.org/faq/logs

Also note that Jitsi does work on a number of systems so the problem
could very well be related to some of the specifics of your
environment.

Emil

Take a look at configuration 1, it says "pulseaudio".

The Bug is in the code, there is no way to configure anything to
make it
working.
In my opinion a bug report should be opened, but the jitsi website
said,
that this must be discussed on the mailinglist first, that's why i
am here.

Best Regards,
  Oliver C.

Am 28.12.2013 08:30, schrieb Emil Ivov:

Try using it with pulseaudio. Make sure you select this in Jitsi
after you
install it.

--sent from my mobile

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

--
https://jitsi.org


#16

According to the audio settings it is using my Soundblaster Audigy 2, but that
doesn't explain the log errors about card 0 in my last mail.

Best Regards,
  Oliver C.

BTW, has someone opened a bug report after i told about the bug in this mailinglist two weeks ago?

···

Am 13.01.2014 07:54, schrieb Emil Ivov:

On 12.01.14, 23:16, Oliver C. wrote:

Hello all,

the problem still exist with the new stable version.
I assume that jitsi messes around with the soundcard device number to use.
Does Jitsi assume that the soundcard is always alsa device 0 instead of
selecting it wisely?
Is the soundcard number hardcoded?

Have you had a look at the audio settings?

Jitsi lists, in its audio settings tab, the devices it retrieves from pulse audio or portaudio. You can see there which one it is using.

Emil

Maybe this is the bug?

ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports
only playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
23:11:04.171 Schwerwiegend: [13]
org.jitsi.impl.neomedia.device.DeviceConfiguration.error() Failed to
register custom Renderer
org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError:
/usr/share/jitsi/lib/native/libjnawtrenderer.so: libjawt.so: Kann die
Shared-Object-Datei nicht �ffnen: Datei oder Verzeichnis nicht gefunden
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
         at java.lang.Runtime.loadLibrary0(Runtime.java:849)
         at java.lang.System.loadLibrary(System.java:1088)
         at
org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer.<clinit>(JAWTRenderer.java:90)

         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:190)
         at
org.jitsi.impl.neomedia.device.DeviceConfiguration.registerCustomRenderers(DeviceConfiguration.java:1028)

         at
org.jitsi.impl.neomedia.device.DeviceConfiguration.<init>(DeviceConfiguration.java:355)

         at
org.jitsi.impl.neomedia.MediaServiceImpl.<init>(MediaServiceImpl.java:141)

         at
sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at
sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

         at
sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

         at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
         at java.lang.Class.newInstance(Class.java:374)
         at
org.jitsi.impl.libjitsi.LibJitsiImpl.getService(LibJitsiImpl.java:133)
         at
org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(LibJitsiOSGiImpl.java:86)

         at
org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(LibJitsi.java:163)

         at
org.jitsi.service.libjitsi.LibJitsi.getMediaService(LibJitsi.java:115)
         at
net.java.sip.communicator.impl.neomedia.NeomediaActivator.start(NeomediaActivator.java:380)

         at
org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)

         at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
         at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
         at
org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
         at
org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
         at java.lang.Thread.run(Thread.java:744)

Best Regards,
  Oliver C.

Am 29.12.2013 18:54, schrieb Oliver C.:

Hello Emil,

okay.
I took a look at the FAQ.
Now i added additional logs to this E-mail. It includes logs from the
stable and newer nighly builds version.
I hope they can help somehow to find the problem.

BTW, i edited some fields in the logs for privacy reasons, in my
opinion, such things like the XMPP account
that was used don't belong into log files.

Best Regards,
Oliver C.

Am 29.12.2013 17:59, schrieb Emil Ivov:

Hey Oliver,

On Sun, Dec 29, 2013 at 6:40 PM, Oliver C. <kreuzritter2000@gmx.de> >>>> wrote:

Hello Emil,

now i don't know why i sent all the log output and all the other
informations. Now i am pretty sure, they were useless.

I read your message on a mobile and thought I'd offer a quick guess
based on your initial explanation. There's no reason to think your
efforts were useless, although you may want to consider attaching the
Jitsi logs next time you report an issue (or in case someone asks for
them now):

https://jitsi.org/faq/logs

Also note that Jitsi does work on a number of systems so the problem
could very well be related to some of the specifics of your
environment.

Emil

Take a look at configuration 1, it says "pulseaudio".

The Bug is in the code, there is no way to configure anything to
make it
working.
In my opinion a bug report should be opened, but the jitsi website
said,
that this must be discussed on the mailinglist first, that's why i
am here.

Best Regards,
  Oliver C.

Am 28.12.2013 08:30, schrieb Emil Ivov:

Try using it with pulseaudio. Make sure you select this in Jitsi
after you
install it.

--sent from my mobile

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users


#17

Hey Oliver,

According to the audio settings it is using my Soundblaster Audigy 2,
but that
doesn't explain the log errors about card 0 in my last mail.

Best Regards,
   Oliver C.

BTW, has someone opened a bug report after i told about the bug in this
mailinglist two weeks ago?

No because we don't really know what the problem is. The situation you describe does not seem to appear commonly and as you have seen from your list experience, the current report does not seem to ring a bell for anyone.

Feel free to open a ticket if you wish, but at this specific point and in the current state of the investigation here, I don't it would stand a decent chance of being looked at. (Obviously I'd be very glad to be proven wrong).

Emil

···

On 13.01.14, 19:47, Oliver C. wrote:

Am 13.01.2014 07:54, schrieb Emil Ivov:

On 12.01.14, 23:16, Oliver C. wrote:

Hello all,

the problem still exist with the new stable version.
I assume that jitsi messes around with the soundcard device number to
use.
Does Jitsi assume that the soundcard is always alsa device 0 instead of
selecting it wisely?
Is the soundcard number hardcoded?

Have you had a look at the audio settings?

Jitsi lists, in its audio settings tab, the devices it retrieves from
pulse audio or portaudio. You can see there which one it is using.

Emil

Maybe this is the bug?

ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer
returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder
Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt
(111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt
(111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt
(111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt
(111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports
only playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
23:11:04.171 Schwerwiegend: [13]
org.jitsi.impl.neomedia.device.DeviceConfiguration.error() Failed to
register custom Renderer
org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with
JMF.
java.lang.UnsatisfiedLinkError:
/usr/share/jitsi/lib/native/libjnawtrenderer.so: libjawt.so: Kann die
Shared-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden
          at java.lang.ClassLoader$NativeLibrary.load(Native Method)
          at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
          at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
          at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
          at java.lang.Runtime.loadLibrary0(Runtime.java:849)
          at java.lang.System.loadLibrary(System.java:1088)
          at
org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer.<clinit>(JAWTRenderer.java:90)

          at java.lang.Class.forName0(Native Method)
          at java.lang.Class.forName(Class.java:190)
          at
org.jitsi.impl.neomedia.device.DeviceConfiguration.registerCustomRenderers(DeviceConfiguration.java:1028)

          at
org.jitsi.impl.neomedia.device.DeviceConfiguration.<init>(DeviceConfiguration.java:355)

          at
org.jitsi.impl.neomedia.MediaServiceImpl.<init>(MediaServiceImpl.java:141)

          at
sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
          at
sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

          at
sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

          at
java.lang.reflect.Constructor.newInstance(Constructor.java:526)
          at java.lang.Class.newInstance(Class.java:374)
          at
org.jitsi.impl.libjitsi.LibJitsiImpl.getService(LibJitsiImpl.java:133)
          at
org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(LibJitsiOSGiImpl.java:86)

          at
org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(LibJitsi.java:163)

          at
org.jitsi.service.libjitsi.LibJitsi.getMediaService(LibJitsi.java:115)
          at
net.java.sip.communicator.impl.neomedia.NeomediaActivator.start(NeomediaActivator.java:380)

          at
org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)

          at
org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
          at
org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
          at
org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
          at
org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
          at java.lang.Thread.run(Thread.java:744)

Best Regards,
   Oliver C.

Am 29.12.2013 18:54, schrieb Oliver C.:

Hello Emil,

okay.
I took a look at the FAQ.
Now i added additional logs to this E-mail. It includes logs from the
stable and newer nighly builds version.
I hope they can help somehow to find the problem.

BTW, i edited some fields in the logs for privacy reasons, in my
opinion, such things like the XMPP account
that was used don't belong into log files.

Best Regards,
  Oliver C.

Am 29.12.2013 17:59, schrieb Emil Ivov:

Hey Oliver,

On Sun, Dec 29, 2013 at 6:40 PM, Oliver C. <kreuzritter2000@gmx.de> >>>>> wrote:

Hello Emil,

now i don't know why i sent all the log output and all the other
informations. Now i am pretty sure, they were useless.

I read your message on a mobile and thought I'd offer a quick guess
based on your initial explanation. There's no reason to think your
efforts were useless, although you may want to consider attaching the
Jitsi logs next time you report an issue (or in case someone asks for
them now):

https://jitsi.org/faq/logs

Also note that Jitsi does work on a number of systems so the problem
could very well be related to some of the specifics of your
environment.

Emil

Take a look at configuration 1, it says "pulseaudio".

The Bug is in the code, there is no way to configure anything to
make it
working.
In my opinion a bug report should be opened, but the jitsi website
said,
that this must be discussed on the mailinglist first, that's why i
am here.

Best Regards,
   Oliver C.

Am 28.12.2013 08:30, schrieb Emil Ivov:

Try using it with pulseaudio. Make sure you select this in Jitsi
after you
install it.

--sent from my mobile

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

_______________________________________________
users mailing list
users@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/users

--
https://jitsi.org


#18

Hi Oliver,

just one or two ideas that might help to find the issue.

First, I recommend to test with PulseAudio.
I consider PortAudio in Jitsi broken on Linux. At least on my machine I
could only get calls of up to 30 Minutes after which I also had to
restart the machine to make another call possible, so it messes
something up, big time. With PulseAudio I had calls for 4 hours without
issues.

I assume you have your audigy-card, card 1, as default? Anyway, I
assume Jitsi tries all cards it finds, possibly in order to be able to
list them in the menu or for some other reason. That shouldn't break
anything, I wouldn't worry about it.

Am I correct in assuming that sound in Jitsi and calls work? That
wasn't clear to me from the original mail.

Two things you could try come to mind, both are sort of long shots, but
maybe better than nothing.

1. Try your internal audio interface and see whether you get the same
issue. It may be some weird interaction between the alsa drivers,
pulseaudio and jitsi. I know you had a portaudio test case, but I
assume you had pulseaudio running when you did this, so the signal flow
was portaudio -> pulseaudio -> alsa instead of portaudio -> alsa.

2. I noticed you run KDE. It's another long shot, but you may try the
same with another DE or no DE at all (something more minimal like
openbox). Basically just make sure that all the bells and whistles that
play under the hood of KDE aren't there and thus can't interfere.

All in all it sounds to me as if something is hogging the audio
interface exclusively, and thus hindering all other applications. Sound
servers tend to do this, jack is an example, and PA likely does this as
well, but normally PA acts as a kitchen sink for everything else and
mixes it. Not in this case it seems.

Another small idea: did you try to restart PA instead of restarting the
machine? 'pulseaudio --kill' should do it, if auto-respawn is
disabled you can start it with 'pulseaudio --start'.

Regards,
Philipp

···

On Mon, 13 Jan 2014 19:47:39 +0100 "Oliver C." <kreuzritter2000@gmx.de> wrote:

According to the audio settings it is using my Soundblaster Audigy 2,
but that
doesn't explain the log errors about card 0 in my last mail.

Best Regards,
  Oliver C.

BTW, has someone opened a bug report after i told about the bug in
this mailinglist two weeks ago?


#19

Hello Philipp,

just one or two ideas that might help to find the issue.

First, I recommend to test with PulseAudio.

I recommend to read my mails more carefully, this was already done.

I assume you have your audigy-card, card 1, as default? Anyway, I
assume Jitsi tries all cards it finds, possibly in order to be able to
list them in the menu or for some other reason. That shouldn't break
anything, I wouldn't worry about it.

Am I correct in assuming that sound in Jitsi and calls work? That
wasn't clear to me from the original mail.

No, Jitsi doesn't play any sound, it keeps quiet.
All i get from my speaker system is one and only one deep click that proves that something is switched in the sound configuration,
and this happens only when Jitsi gets started and tries to initialize the sound system.
After that, i get some quiet rustle noise from my speaker system the rest is dead, no sound, no music the soundcard completely stops playing anything. And the only repair for this is rebooting, but i already said that.

<http://www.dict.cc/englisch-deutsch/rustle.html>

1. Try your internal audio interface and see whether you get the same
issue. It may be some weird interaction between the alsa drivers,
pulseaudio and jitsi. I know you had a portaudio test case, but I
assume you had pulseaudio running when you did this, so the signal flow
was portaudio -> pulseaudio -> alsa instead of portaudio -> alsa.

No, when Jitsi uses pulseaudio portaudio shouldn't be used.

2. I noticed you run KDE. It's another long shot, but you may try the
same with another DE or no DE at all (something more minimal like
openbox). Basically just make sure that all the bells and whistles that
play under the hood of KDE aren't there and thus can't interfere.

Thanks for that hint.

Now i installed twm as window manager
and logged in into a twm session.

In this session i opened two console.
First i checked if pulseaudio was running, it wasn't. Very good.

Then i played a music file with mplayer and the mplayer option -ao alsa.
Which means, that mplayer is using ALSA directly. Very good.
My soundcard is able to mix different sound sources in hardware, so it is possible that more than one
application can use it at the same time.

While mplayer was playing the music i started jitsi on the other console.
And BOOM, the sound is dead, like before. Mplayer keeps running, but no music comes out of the speaker system.
Jitsi does a really wired crap thing when initiliazing the soundcard, i strongly recommend to recheck or better rewrite from scratch the source code that is responsible for initializing the sound system.
We really narrowed this down to Jitsi, it's the only application that does this with my sound configuration.
Even other java applications that use sound don't do this.

And to clarify something, after jitsi was run, and after i quit Jitsi, pulseaudio was running in background. It couldn't be killed, because it restarted automatically. As i said before, before the start of jitsi, no pulseaudio was running.
So jitsi starts pulseaudio, messes really everything up and doesn't even stop the pulseaudio system after it was run.

Another small idea: did you try to restart PA instead of restarting the
machine? 'pulseaudio --kill' should do it, if auto-respawn is
disabled you can start it with 'pulseaudio --start'.

As i said before, read my mails more carefully. This was done.
I said in my first mail those two things:
1. "and to fix this, the only solution i found so far was rebooting the computer and rebooting the system. "
2. "Even a restart off pulseaudio or using alsa directly (for example via "mplayer -ao alsa musicfile.mp3") doesn't work. "
Maybe you didn't read the logs also.

Best Regards,
  Oliver C.

BTW.

Here are the logs from the TWM (none KDE) Session:

ALSA lib pcm_dsnoop.c:618:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.rear.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM rear
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.center_lfe.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM center_lfe
ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.HDA-Intel.pcm.side.0:CARD=0'
ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: Datei oder Verzeichnis nicht gefunden
ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: Datei oder Verzeichnis nicht gefunden
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
ALSA lib pcm_dmix.c:961:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
15:00:58.654 Schwerwiegend: [13] org.jitsi.impl.neomedia.device.DeviceConfiguration.error() Failed to register custom Renderer org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer with JMF.
java.lang.UnsatisfiedLinkError: /usr/share/jitsi/lib/native/libjnawtrenderer.so: libjawt.so: Kann die Shared-Object-Datei nicht �ffnen: Datei oder Verzeichnis nicht gefunden
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1965)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1890)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1880)
         at java.lang.Runtime.loadLibrary0(Runtime.java:849)
         at java.lang.System.loadLibrary(System.java:1088)
         at org.jitsi.impl.neomedia.jmfext.media.renderer.video.JAWTRenderer.<clinit>(JAWTRenderer.java:90)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:190)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.registerCustomRenderers(DeviceConfiguration.java:1028)
         at org.jitsi.impl.neomedia.device.DeviceConfiguration.<init>(DeviceConfiguration.java:355)
         at org.jitsi.impl.neomedia.MediaServiceImpl.<init>(MediaServiceImpl.java:141)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
         at java.lang.Class.newInstance(Class.java:374)
         at org.jitsi.impl.libjitsi.LibJitsiImpl.getService(LibJitsiImpl.java:133)
         at org.jitsi.impl.libjitsi.LibJitsiOSGiImpl.getService(LibJitsiOSGiImpl.java:86)
         at org.jitsi.service.libjitsi.LibJitsi.invokeGetServiceOnImpl(LibJitsi.java:163)
         at org.jitsi.service.libjitsi.LibJitsi.getMediaService(LibJitsi.java:115)
         at net.java.sip.communicator.impl.neomedia.NeomediaActivator.start(NeomediaActivator.java:380)
         at org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)
         at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
         at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
         at org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
         at org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
         at java.lang.Thread.run(Thread.java:744)
net.java.sip.communicator.impl.galagonotification.DBusException: The name org.freedesktop.Notifications was not provided by any .service files
         at net.java.sip.communicator.impl.galagonotification.GalagoNotification.getCapabilities(Native Method)
         at net.java.sip.communicator.impl.galagonotification.GalagoNotificationActivator.start(GalagoNotificationActivator.java:89)
         at org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)
         at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
         at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
         at org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
         at org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
         at java.lang.Thread.run(Thread.java:744)
15:01:00.324 Schwerwiegend: [13] impl.osdependent.SystemTray.getDefaultSystemTray().57 Failed to initialize java.awt.SystemTray
java.lang.UnsupportedOperationException: java.lang.reflect.InvocationTargetException
         at net.java.sip.communicator.impl.osdependent.SystemTray$AWTSystemTrayPeer.<init>(SystemTray.java:158)
         at net.java.sip.communicator.impl.osdependent.SystemTray.getDefaultSystemTray(SystemTray.java:52)
         at net.java.sip.communicator.impl.osdependent.jdic.SystrayServiceJdicImpl.<init>(SystrayServiceJdicImpl.java:134)
         at net.java.sip.communicator.impl.osdependent.OsDependentActivator.start(OsDependentActivator.java:73)
         at org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)
         at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
         at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
         at org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
         at org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
         at java.lang.Thread.run(Thread.java:744)
Caused by: java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:606)
         at net.java.sip.communicator.impl.osdependent.SystemTray$AWTSystemTrayPeer.<init>(SystemTray.java:150)
         ... 9 more
Caused by: java.lang.UnsupportedOperationException: The system tray is not supported on the current platform.
         at java.awt.SystemTray.getSystemTray(SystemTray.java:186)
         ... 14 more
15:01:00.328 Schwerwiegend: [13] impl.osdependent.SystemTray.getDefaultSystemTray().64 Failed to initialize the desktop.tray implementation.
15:01:00.329 Schwerwiegend: [13] impl.osdependent.jdic.SystrayServiceJdicImpl.<init>().144 Failed to create a systray!
java.lang.UnsupportedOperationException: Failed to initialize the desktop.tray implementation.
         at net.java.sip.communicator.impl.osdependent.SystemTray.getDefaultSystemTray(SystemTray.java:66)
         at net.java.sip.communicator.impl.osdependent.jdic.SystrayServiceJdicImpl.<init>(SystrayServiceJdicImpl.java:134)
         at net.java.sip.communicator.impl.osdependent.OsDependentActivator.start(OsDependentActivator.java:73)
         at org.apache.felix.framework.util.SecureAction.startActivator(SecureAction.java:629)
         at org.apache.felix.framework.Felix.activateBundle(Felix.java:1904)
         at org.apache.felix.framework.Felix.startBundle(Felix.java:1822)
         at org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1192)
         at org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
         at java.lang.Thread.run(Thread.java:744)
15:01:03.137 Schwerwiegend: [38] impl.osdependent.jdic.SystrayServiceJdicImpl.checkInitialized().472 Systray not init
15:01:04.665 Schwerwiegend: [38] impl.osdependent.jdic.SystrayServiceJdicImpl.checkInitialized().472 Systray not init
15:01:04.993 Schwerwiegend: [38] impl.osdependent.jdic.SystrayServiceJdicImpl.checkInitialized().472 Systray not init


#20

Hello Philipp,

> just one or two ideas that might help to find the issue.
>
> First, I recommend to test with PulseAudio.

I recommend to read my mails more carefully, this was already done.

I did, this was a general recommendation.

> I assume you have your audigy-card, card 1, as default? Anyway, I
> assume Jitsi tries all cards it finds, possibly in order to be able
> to list them in the menu or for some other reason. That shouldn't
> break anything, I wouldn't worry about it.
>
> Am I correct in assuming that sound in Jitsi and calls work? That
> wasn't clear to me from the original mail.
No, Jitsi doesn't play any sound, it keeps quiet.
All i get from my speaker system is one and only one deep click that
proves that something is switched in the sound configuration,
and this happens only when Jitsi gets started and tries to initialize
the sound system.
After that, i get some quiet rustle noise from my speaker system the
rest is dead, no sound, no music the soundcard completely stops
playing anything. And the only repair for this is rebooting, but i
already said that.

<http://www.dict.cc/englisch-deutsch/rustle.html>

Is the rustling also there when nothing is playing?

> 1. Try your internal audio interface and see whether you get the
> same issue. It may be some weird interaction between the alsa
> drivers, pulseaudio and jitsi. I know you had a portaudio test
> case, but I assume you had pulseaudio running when you did this, so
> the signal flow was portaudio -> pulseaudio -> alsa instead of
> portaudio -> alsa.

No, when Jitsi uses pulseaudio portaudio shouldn't be used.

Did you try it with your internal interface?
You got that the wrong way around. What my little diagram shows is jitsi
using portaudio, which may use pulseaudio if it is running.

> 2. I noticed you run KDE. It's another long shot, but you may try
> the same with another DE or no DE at all (something more minimal
> like openbox). Basically just make sure that all the bells and
> whistles that play under the hood of KDE aren't there and thus
> can't interfere.
Thanks for that hint.

Now i installed twm as window manager
and logged in into a twm session.

In this session i opened two console.
First i checked if pulseaudio was running, it wasn't. Very good.

Then i played a music file with mplayer and the mplayer option -ao
alsa. Which means, that mplayer is using ALSA directly. Very good.
My soundcard is able to mix different sound sources in hardware, so
it is possible that more than one
application can use it at the same time.

While mplayer was playing the music i started jitsi on the other
console. And BOOM, the sound is dead, like before. Mplayer keeps
running, but no music comes out of the speaker system.
Jitsi does a really wired crap thing when initiliazing the soundcard,
i strongly recommend to recheck or better rewrite from scratch the
source code that is responsible for initializing the sound system.
We really narrowed this down to Jitsi, it's the only application that
does this with my sound configuration.
Even other java applications that use sound don't do this.

And to clarify something, after jitsi was run, and after i quit
Jitsi, pulseaudio was running in background. It couldn't be killed,
because it restarted automatically. As i said before, before the
start of jitsi, no pulseaudio was running.
So jitsi starts pulseaudio, messes really everything up and doesn't
even stop the pulseaudio system after it was run.

Good, did you also try twm and jitsi with portaudio (pulseaudio
not running)?

> Another small idea: did you try to restart PA instead of restarting
> the machine? 'pulseaudio --kill' should do it, if auto-respawn is
> disabled you can start it with 'pulseaudio --start'.
As i said before, read my mails more carefully. This was done.
I said in my first mail those two things:
1. "and to fix this, the only solution i found so far was rebooting
the computer and rebooting the system. "

This implies you tried EVERYTHING, which is a very big word.

2. "Even a restart off pulseaudio or using alsa directly (for example
via "mplayer -ao alsa musicfile.mp3") doesn't work. "

If pulseaudio is running this would still go through pulseaudio.

Maybe you didn't read the logs also.

I did.

···

On Sat, 18 Jan 2014 15:33:04 +0100 "Oliver C." <kreuzritter2000@gmx.de> wrote:

--
JID: murks@jit.si