Hello everyone,
Following Emil's mention of a release I am going to schedule one for Thursday, 12.Dec.2013 12:00 CET. If any developers here have essential commtis that they believe must be in the next release but won't make it till Thursday, please let yourselves known.
Cheers,
Pavel Tankov
Hey
Hello everyone,
Following Emil's mention of a release I am going to schedule one for
Thursday, 12.Dec.2013 12:00 CET. If any developers here have essential
commtis that they believe must be in the next release but won't make it
till
Thursday, please let yourselves known.
I guess this is a "string freeze" then.
If you want your language to be included in the next stable, please go to
http://translate.jitsi.org/projects/sip_communicator/ and help finishing
your language.
(It's more important this time as a lot of OTR related strings have been
updated.)
Cheers,
Pavel Tankov
Regards,
Ingo
Shall we update opus to 1.1? We currently have 1.1-beta.
http://www.opus-codec.org/ says:
Versions 1.1 released
5 December, 2013
After more than two years of development, we have released Opus 1.1.
This includes:
new analysis code and tuning that significantly improves encoding
quality, especially for variable-bitrate (VBR),
automatic detection of speech or music to decide which encoding mode to use,
surround with good quality at 128 kbps for 5.1 and usable down to 48 kbps, and
speed improvements on all architectures, especially ARM, where
decoding uses around 40% less CPU and encoding uses around 30% less
CPU.
These improvements are explained in more details in Monty's demo
(updated from the 1.1 beta demo).
Versions 1.1-rc3 released
3 December, 2013
This is the third and likely last release candidate for 1.1. It fixes
several bugs in the fixed-point build. Floating point is unaffected.
The code is available from the downloads page.
Versions 1.1-rc2 released
27 November, 2013
This second release candidate fixes an alignment issue on ARMv5E and
improves the Neon optimizations. Other platforms are unaffected. The
code is available from the downloads page.
Versions 1.1-rc released
26 November, 2013
We're getting closer to the final 1.1 with this new release that
further improves surround encoding quality. It also includes better
tuning of surround and stereo for lower bitrates. The complexity has
been reduced on all CPUs, but especially ARM, which now has Neon
assembly for the encoder. At last, there are a few bugfixes. The code
is available from the downloads page.
Sounds like a good idea.
Damencho just found out a regression with auto resource switching in XMPP that often causes message delivery to fail.
We need to fix this before releasing, so it might just leave us the time to handle opus too.
Emil
On 11.12.13, 00:53, Lyubomir Marinov wrote:
Shall we update opus to 1.1? We currently have 1.1-beta.
http://www.opus-codec.org/ says:
Versions 1.1 released
5 December, 2013
After more than two years of development, we have released Opus 1.1.
This includes:new analysis code and tuning that significantly improves encoding
quality, especially for variable-bitrate (VBR),
automatic detection of speech or music to decide which encoding mode to use,
surround with good quality at 128 kbps for 5.1 and usable down to 48 kbps, and
speed improvements on all architectures, especially ARM, where
decoding uses around 40% less CPU and encoding uses around 30% less
CPU.These improvements are explained in more details in Monty's demo
(updated from the 1.1 beta demo).Versions 1.1-rc3 released
3 December, 2013
This is the third and likely last release candidate for 1.1. It fixes
several bugs in the fixed-point build. Floating point is unaffected.
The code is available from the downloads page.Versions 1.1-rc2 released
27 November, 2013
This second release candidate fixes an alignment issue on ARMv5E and
improves the Neon optimizations. Other platforms are unaffected. The
code is available from the downloads page.Versions 1.1-rc released
26 November, 2013
We're getting closer to the final 1.1 with this new release that
further improves surround encoding quality. It also includes better
tuning of surround and stereo for lower bitrates. The complexity has
been reduced on all CPUs, but especially ARM, which now has Neon
assembly for the encoder. At last, there are a few bugfixes. The code
is available from the downloads page._______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev
Hello,
On 12/11/13 1:12 AM, Emil Ivov wrote:
Sounds like a good idea.
Damencho just found out a regression with auto resource switching in
XMPP that often causes message delivery to fail.We need to fix this before releasing, so it might just leave us the time
to handle opus too.Emil
I can build the linux and mac binaries, but probably tomorrow night (12
Dec).
Regards,
Boris
Hi Ingo,
Sorry to disturb you
Please write to the list and not to me directly.
but I was wondering if you are going to release final
2.3 for jitsi. I am going to deploy jitsi instead of spark in my production
and waiting for the new release.
Thanks a lot for all your team.
We found some issues that we wanted to fix and the release is scheduled for early next week.
Cordialement / Best Regards / تَحِيّاتي مَع / 最好的致意
Tarek AZEROUAL
Ingo
Thank you, Boris. I have the 64-bit Windows binary built and I can
take care of the 32-bit Windows binary as well.
2013/12/11 Boris Grozev <boris@jitsi.org>:
I can build the linux and mac binaries, but probably tomorrow night (12
Dec).
Thanks, Lubo! Sorry for the delay, I just committed the new builds for
linux and mac.
Regards,
Boris
On 12/11/13 7:47 AM, Lyubomir Marinov wrote:
2013/12/11 Boris Grozev <boris@jitsi.org>:
I can build the linux and mac binaries, but probably tomorrow night (12
Dec).Thank you, Boris. I have the 64-bit Windows binary built and I can
take care of the 32-bit Windows binary as well.
Anyone else?
Hristo, Damencho, I know you were also looking at some last minute issues.
Think you'd be ready today or should we postpone for next week?
--sent from my mobile
On 13 Dec 2013 07:11, "Boris Grozev" <boris@jitsi.org> wrote:
On 12/11/13 7:47 AM, Lyubomir Marinov wrote:
> 2013/12/11 Boris Grozev <boris@jitsi.org>:
>> I can build the linux and mac binaries, but probably tomorrow night (12
>> Dec).
>
> Thank you, Boris. I have the 64-bit Windows binary built and I can
> take care of the 32-bit Windows binary as well.Thanks, Lubo! Sorry for the delay, I just committed the new builds for
linux and mac.Regards,
Boris_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev
Hi Emil,
I'm working on one contact list issue. Also I would like to commit a
fix for disappearing accounts before the release.
Regards,
Pawel
On Fri, Dec 13, 2013 at 9:21 AM, Emil Ivov <emcho@jitsi.org> wrote:
Anyone else?
Hristo, Damencho, I know you were also looking at some last minute issues.
Think you'd be ready today or should we postpone for next week?--sent from my mobile
On 13 Dec 2013 07:11, "Boris Grozev" <boris@jitsi.org> wrote:
On 12/11/13 7:47 AM, Lyubomir Marinov wrote:
> 2013/12/11 Boris Grozev <boris@jitsi.org>:
>> I can build the linux and mac binaries, but probably tomorrow night (12
>> Dec).
>
> Thank you, Boris. I have the 64-bit Windows binary built and I can
> take care of the 32-bit Windows binary as well.Thanks, Lubo! Sorry for the delay, I just committed the new builds for
linux and mac.Regards,
Boris_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev
OK cool, thanks for reminding me!
We'll push it for next week.
Cheers,
Emil
--sent from my mobile
On 13 Dec 2013 09:26, "Paweł Domas" <pawel.domas@jitsi.org> wrote:
Hi Emil,
I'm working on one contact list issue. Also I would like to commit a
fix for disappearing accounts before the release.Regards,
PawelOn Fri, Dec 13, 2013 at 9:21 AM, Emil Ivov <emcho@jitsi.org> wrote:
> Anyone else?
>
> Hristo, Damencho, I know you were also looking at some last minute
issues.
> Think you'd be ready today or should we postpone for next week?
>
> --sent from my mobile
>
> On 13 Dec 2013 07:11, "Boris Grozev" <boris@jitsi.org> wrote:
>>
>> On 12/11/13 7:47 AM, Lyubomir Marinov wrote:
>> > 2013/12/11 Boris Grozev <boris@jitsi.org>:
>> >> I can build the linux and mac binaries, but probably tomorrow night
(12
>> >> Dec).
>> >
>> > Thank you, Boris. I have the 64-bit Windows binary built and I can
>> > take care of the 32-bit Windows binary as well.
>>
>> Thanks, Lubo! Sorry for the delay, I just committed the new builds for
>> linux and mac.
>>
>>
>> Regards,
>> Boris
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev
I'll be ready for the next week.
On Fri, Dec 13, 2013 at 10:31 AM, Emil Ivov <emcho@jitsi.org> wrote:
OK cool, thanks for reminding me!
We'll push it for next week.
Cheers,
Emil--sent from my mobile
On 13 Dec 2013 09:26, "Paweł Domas" <pawel.domas@jitsi.org> wrote:Hi Emil,
I'm working on one contact list issue. Also I would like to commit a
fix for disappearing accounts before the release.Regards,
PawelOn Fri, Dec 13, 2013 at 9:21 AM, Emil Ivov <emcho@jitsi.org> wrote:
> Anyone else?
>
> Hristo, Damencho, I know you were also looking at some last minute
issues.
> Think you'd be ready today or should we postpone for next week?
>
> --sent from my mobile
>
> On 13 Dec 2013 07:11, "Boris Grozev" <boris@jitsi.org> wrote:
>>
>> On 12/11/13 7:47 AM, Lyubomir Marinov wrote:
>> > 2013/12/11 Boris Grozev <boris@jitsi.org>:
>> >> I can build the linux and mac binaries, but probably tomorrow night
(12
>> >> Dec).
>> >
>> > Thank you, Boris. I have the 64-bit Windows binary built and I can
>> > take care of the 32-bit Windows binary as well.
>>
>> Thanks, Lubo! Sorry for the delay, I just committed the new builds for
>> linux and mac.
>>
>>
>> Regards,
>> Boris
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev
--
Regards,
Hristo.
A quick update on the release. I believe we have the following two remaining regressions:
1. Contact list search is broken (seems to be related to one of the previous fixes)
2. Root contact group seems to behave weirdly
3. call hangs when we get an SDP answer that contains opus/48000 instead of opuse/48000/2
ETA: possibly tomorrow but it could change depending on how circumstances evolve.
Emil
On 13.12.13, 10:06, Hristo Terezov wrote:
I'll be ready for the next week.
On Fri, Dec 13, 2013 at 10:31 AM, Emil Ivov <emcho@jitsi.org > <mailto:emcho@jitsi.org>> wrote:
OK cool, thanks for reminding me!
We'll push it for next week.
Cheers,
Emil--sent from my mobile
On 13 Dec 2013 09:26, "Paweł Domas" <pawel.domas@jitsi.org > <mailto:pawel.domas@jitsi.org>> wrote:
Hi Emil,
I'm working on one contact list issue. Also I would like to commit a
fix for disappearing accounts before the release.Regards,
PawelOn Fri, Dec 13, 2013 at 9:21 AM, Emil Ivov <emcho@jitsi.org > <mailto:emcho@jitsi.org>> wrote:
> Anyone else?
>
> Hristo, Damencho, I know you were also looking at some last
minute issues.
> Think you'd be ready today or should we postpone for next week?
>
> --sent from my mobile
>
> On 13 Dec 2013 07:11, "Boris Grozev" <boris@jitsi.org > <mailto:boris@jitsi.org>> wrote:
>>
>> On 12/11/13 7:47 AM, Lyubomir Marinov wrote:
>> > 2013/12/11 Boris Grozev <boris@jitsi.org
<mailto:boris@jitsi.org>>:
>> >> I can build the linux and mac binaries, but probably
tomorrow night (12
>> >> Dec).
>> >
>> > Thank you, Boris. I have the 64-bit Windows binary built
and I can
>> > take care of the 32-bit Windows binary as well.
>>
>> Thanks, Lubo! Sorry for the delay, I just committed the new
builds for
>> linux and mac.
>>
>> Regards,
>> Boris
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org <mailto:dev@jitsi.org>
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org <mailto:dev@jitsi.org>
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev_______________________________________________
dev mailing list
dev@jitsi.org <mailto:dev@jitsi.org>
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev_______________________________________________
dev mailing list
dev@jitsi.org <mailto:dev@jitsi.org>
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev--
Regards,
Hristo._______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev
Hi,
was there any progress? I noticed there are 2.4 nightlies now ... can I presume that 2.3.4995 build will be published as 2.3 stable?
Richard
-----Original Message-----
From: dev-bounces@jitsi.org [mailto:dev-bounces@jitsi.org] On Behalf Of Emil Ivov
Sent: Monday, December 16, 2013 11:06 AM
To: Jitsi Developers
Subject: Re: [jitsi-dev] The stable release of Jitsi 2.3 is scheduled for Thursday, 12.Dec.2013 12:00 CET
A quick update on the release. I believe we have the following two remaining regressions:
1. Contact list search is broken (seems to be related to one of the previous fixes) 2. Root contact group seems to behave weirdly 3. call hangs when we get an SDP answer that contains opus/48000 instead of opuse/48000/2
ETA: possibly tomorrow but it could change depending on how circumstances evolve.
Emil
On 13.12.13, 10:06, Hristo Terezov wrote:
I'll be ready for the next week.
On Fri, Dec 13, 2013 at 10:31 AM, Emil Ivov <emcho@jitsi.org > <mailto:emcho@jitsi.org>> wrote:
OK cool, thanks for reminding me!
We'll push it for next week.
Cheers,
Emil--sent from my mobile
On 13 Dec 2013 09:26, "Paweł Domas" <pawel.domas@jitsi.org > <mailto:pawel.domas@jitsi.org>> wrote:
Hi Emil,
I'm working on one contact list issue. Also I would like to commit a
fix for disappearing accounts before the release.Regards,
PawelOn Fri, Dec 13, 2013 at 9:21 AM, Emil Ivov <emcho@jitsi.org > <mailto:emcho@jitsi.org>> wrote:
> Anyone else?
>
> Hristo, Damencho, I know you were also looking at some last
minute issues.
> Think you'd be ready today or should we postpone for next week?
>
> --sent from my mobile
>
> On 13 Dec 2013 07:11, "Boris Grozev" <boris@jitsi.org > <mailto:boris@jitsi.org>> wrote:
>>
>> On 12/11/13 7:47 AM, Lyubomir Marinov wrote:
>> > 2013/12/11 Boris Grozev <boris@jitsi.org
<mailto:boris@jitsi.org>>:
>> >> I can build the linux and mac binaries, but probably
tomorrow night (12
>> >> Dec).
>> >
>> > Thank you, Boris. I have the 64-bit Windows binary built
and I can
>> > take care of the 32-bit Windows binary as well.
>>
>> Thanks, Lubo! Sorry for the delay, I just committed the new
builds for
>> linux and mac.
>>
>>
>> Regards,
>> Boris
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org <mailto:dev@jitsi.org>
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org <mailto:dev@jitsi.org>
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev_______________________________________________
dev mailing list
dev@jitsi.org <mailto:dev@jitsi.org>
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev_______________________________________________
dev mailing list
dev@jitsi.org <mailto:dev@jitsi.org>
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev--
Regards,
Hristo._______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev
_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev
________________________________
Prohlášení: k tomuto e-mailu je připojeno prohlášení, jehož
plné znění naleznete na stránce http://www.ipex.cz/prohlaseni
No. We are almost there though.
--sent from my mobile
On 20 Dec 2013 10:13, "Richard Karmazín" <richard.karmazin@ipex.cz> wrote:
Hi,
was there any progress? I noticed there are 2.4 nightlies now ... can I
presume that 2.3.4995 build will be published as 2.3 stable?Richard
-----Original Message-----
From: dev-bounces@jitsi.org [mailto:dev-bounces@jitsi.org] On Behalf Of
Emil Ivov
Sent: Monday, December 16, 2013 11:06 AM
To: Jitsi Developers
Subject: Re: [jitsi-dev] The stable release of Jitsi 2.3 is scheduled for
Thursday, 12.Dec.2013 12:00 CETA quick update on the release. I believe we have the following two
remaining regressions:1. Contact list search is broken (seems to be related to one of the
previous fixes) 2. Root contact group seems to behave weirdly 3. call hangs
when we get an SDP answer that contains opus/48000 instead of opuse/48000/2ETA: possibly tomorrow but it could change depending on how circumstances
evolve.Emil
On 13.12.13, 10:06, Hristo Terezov wrote:
> I'll be ready for the next week.
>
>
> On Fri, Dec 13, 2013 at 10:31 AM, Emil Ivov <emcho@jitsi.org > > <mailto:emcho@jitsi.org>> wrote:
>
> OK cool, thanks for reminding me!
>
> We'll push it for next week.
>
> Cheers,
> Emil
>
> --sent from my mobile
>
> On 13 Dec 2013 09:26, "Paweł Domas" <pawel.domas@jitsi.org > > <mailto:pawel.domas@jitsi.org>> wrote:
>
> Hi Emil,
>
> I'm working on one contact list issue. Also I would like to
commit a
> fix for disappearing accounts before the release.
>
> Regards,
> Pawel
>
> On Fri, Dec 13, 2013 at 9:21 AM, Emil Ivov <emcho@jitsi.org > > <mailto:emcho@jitsi.org>> wrote:
> > Anyone else?
> >
> > Hristo, Damencho, I know you were also looking at some last
> minute issues.
> > Think you'd be ready today or should we postpone for next
week?
> >
> > --sent from my mobile
> >
> > On 13 Dec 2013 07:11, "Boris Grozev" <boris@jitsi.org > > <mailto:boris@jitsi.org>> wrote:
> >>
> >> On 12/11/13 7:47 AM, Lyubomir Marinov wrote:
> >> > 2013/12/11 Boris Grozev <boris@jitsi.org
> <mailto:boris@jitsi.org>>:
> >> >> I can build the linux and mac binaries, but probably
> tomorrow night (12
> >> >> Dec).
> >> >
> >> > Thank you, Boris. I have the 64-bit Windows binary built
> and I can
> >> > take care of the 32-bit Windows binary as well.
> >>
> >> Thanks, Lubo! Sorry for the delay, I just committed the new
> builds for
> >> linux and mac.
> >>
> >>
> >> Regards,
> >> Boris
> >>
> >> _______________________________________________
> >> dev mailing list
> >> dev@jitsi.org <mailto:dev@jitsi.org>
> >> Unsubscribe instructions and other list options:
> >> http://lists.jitsi.org/mailman/listinfo/dev
> >
> >
> > _______________________________________________
> > dev mailing list
> > dev@jitsi.org <mailto:dev@jitsi.org>
> > Unsubscribe instructions and other list options:
> > http://lists.jitsi.org/mailman/listinfo/dev
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org <mailto:dev@jitsi.org>
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org <mailto:dev@jitsi.org>
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
>
> --
> Regards,
> Hristo.
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev
>_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev________________________________
Prohlášení: k tomuto e-mailu je připojeno prohlášení, jehož
plné znění naleznete na stránce http://www.ipex.cz/prohlaseni
_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev