[jitsi-dev] How to configure jitsi videobridge to work with freeswitch or asterisk


#1

Hi, I would like to configure jitsi videobridge to work with freeswitch or
asterisk so that people calling freeswitch or asterisk can join a video
conference handled by jitsi videobridge. Would you please help to provide
an instruction on how to configure both jitsi videobridge and freeswitch or
asterisk for this purpose ?

Thanks a lot,
Kai


#2

Hi,

You can use jigasi for sip connectivity. https://github.com/jitsi/jigasi
There is nothing to configure in videobridge as jigasi is as a client
to videobridge, everything is handled by jicofo and jitsi-meet.

Regards
damencho

···

On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> wrote:

Hi, I would like to configure jitsi videobridge to work with freeswitch or
asterisk so that people calling freeswitch or asterisk can join a video
conference handled by jitsi videobridge. Would you please help to provide an
instruction on how to configure both jitsi videobridge and freeswitch or
asterisk for this purpose ?

Thanks a lot,
Kai

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#3

Hi damencho,

Thanks for the advice. I have setup jit-meet and jigasi on the same
machine. I am able to do web meeting very well. I tried to send a SIP
INVITE to myhost:5060 with header "Jitsi-Conference-Room: room1234" to
establish a meeting through SIP but the myhost:5060 never responds. Do I
need to install additional component for jigasi to work as a SIP endpoint ?

Thanks !
Kai

···

On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov <damencho@jitsi.org> wrote:

Hi,

You can use jigasi for sip connectivity. https://github.com/jitsi/jigasi
There is nothing to configure in videobridge as jigasi is as a client
to videobridge, everything is handled by jicofo and jitsi-meet.

Regards
damencho

On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> wrote:
> Hi, I would like to configure jitsi videobridge to work with freeswitch
or
> asterisk so that people calling freeswitch or asterisk can join a video
> conference handled by jitsi videobridge. Would you please help to
provide an
> instruction on how to configure both jitsi videobridge and freeswitch or
> asterisk for this purpose ?
>
> Thanks a lot,
> Kai
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#4

Jigasi is just a sip client that registers to your sip service. You
need to check its logs whether it is registered and whether it is
receiving your invite. The invite should come from your service, you
cannot do it p2p if that is what you tested. I have been testing
jigasi with asterisk with no problem.

···

On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> wrote:

Hi damencho,

Thanks for the advice. I have setup jit-meet and jigasi on the same machine.
I am able to do web meeting very well. I tried to send a SIP INVITE to
myhost:5060 with header "Jitsi-Conference-Room: room1234" to establish a
meeting through SIP but the myhost:5060 never responds. Do I need to install
additional component for jigasi to work as a SIP endpoint ?

Thanks !
Kai

On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov <damencho@jitsi.org> wrote:

Hi,

You can use jigasi for sip connectivity. https://github.com/jitsi/jigasi
There is nothing to configure in videobridge as jigasi is as a client
to videobridge, everything is handled by jicofo and jitsi-meet.

Regards
damencho

On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> wrote:
> Hi, I would like to configure jitsi videobridge to work with freeswitch
> or
> asterisk so that people calling freeswitch or asterisk can join a video
> conference handled by jitsi videobridge. Would you please help to
> provide an
> instruction on how to configure both jitsi videobridge and freeswitch or
> asterisk for this purpose ?
>
> Thanks a lot,
> Kai
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#5

I see. So I need to install freeswitch and connect jigasi with it. Do you
have an instruction on how to connect jigasi with a freeswitch installed on
the same host ?

Thanks,
Kai

···

On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov <damencho@jitsi.org> wrote:

Jigasi is just a sip client that registers to your sip service. You
need to check its logs whether it is registered and whether it is
receiving your invite. The invite should come from your service, you
cannot do it p2p if that is what you tested. I have been testing
jigasi with asterisk with no problem.

On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> wrote:
> Hi damencho,
>
> Thanks for the advice. I have setup jit-meet and jigasi on the same
machine.
> I am able to do web meeting very well. I tried to send a SIP INVITE to
> myhost:5060 with header "Jitsi-Conference-Room: room1234" to establish a
> meeting through SIP but the myhost:5060 never responds. Do I need to
install
> additional component for jigasi to work as a SIP endpoint ?
>
> Thanks !
> Kai
>
> On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov <damencho@jitsi.org> > wrote:
>>
>> Hi,
>>
>> You can use jigasi for sip connectivity. https://github.com/jitsi/
jigasi
>> There is nothing to configure in videobridge as jigasi is as a client
>> to videobridge, everything is handled by jicofo and jitsi-meet.
>>
>> Regards
>> damencho
>>
>>
>> On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> wrote:
>> > Hi, I would like to configure jitsi videobridge to work with
freeswitch
>> > or
>> > asterisk so that people calling freeswitch or asterisk can join a
video
>> > conference handled by jitsi videobridge. Would you please help to
>> > provide an
>> > instruction on how to configure both jitsi videobridge and freeswitch
or
>> > asterisk for this purpose ?
>> >
>> > Thanks a lot,
>> > Kai
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#6

You just need username and password. And when you install jigasi it
asks for that info. I think it will work with
username@ip-address-freeswitch-is-listening-to and the password.

···

On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> wrote:

I see. So I need to install freeswitch and connect jigasi with it. Do you
have an instruction on how to connect jigasi with a freeswitch installed on
the same host ?

Thanks,
Kai

On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov <damencho@jitsi.org> wrote:

Jigasi is just a sip client that registers to your sip service. You
need to check its logs whether it is registered and whether it is
receiving your invite. The invite should come from your service, you
cannot do it p2p if that is what you tested. I have been testing
jigasi with asterisk with no problem.

On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> wrote:
> Hi damencho,
>
> Thanks for the advice. I have setup jit-meet and jigasi on the same
> machine.
> I am able to do web meeting very well. I tried to send a SIP INVITE to
> myhost:5060 with header "Jitsi-Conference-Room: room1234" to establish a
> meeting through SIP but the myhost:5060 never responds. Do I need to
> install
> additional component for jigasi to work as a SIP endpoint ?
>
> Thanks !
> Kai
>
> On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov <damencho@jitsi.org> >> > wrote:
>>
>> Hi,
>>
>> You can use jigasi for sip connectivity.
>> https://github.com/jitsi/jigasi
>> There is nothing to configure in videobridge as jigasi is as a client
>> to videobridge, everything is handled by jicofo and jitsi-meet.
>>
>> Regards
>> damencho
>>
>>
>> On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> wrote:
>> > Hi, I would like to configure jitsi videobridge to work with
>> > freeswitch
>> > or
>> > asterisk so that people calling freeswitch or asterisk can join a
>> > video
>> > conference handled by jitsi videobridge. Would you please help to
>> > provide an
>> > instruction on how to configure both jitsi videobridge and freeswitch
>> > or
>> > asterisk for this purpose ?
>> >
>> > Thanks a lot,
>> > Kai
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#7

Okay thanks !

···

On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov <damencho@jitsi.org> wrote:

You just need username and password. And when you install jigasi it
asks for that info. I think it will work with
username@ip-address-freeswitch-is-listening-to and the password.

On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> wrote:
> I see. So I need to install freeswitch and connect jigasi with it. Do you
> have an instruction on how to connect jigasi with a freeswitch installed
on
> the same host ?
>
> Thanks,
> Kai
>
> On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov <damencho@jitsi.org> > wrote:
>>
>> Jigasi is just a sip client that registers to your sip service. You
>> need to check its logs whether it is registered and whether it is
>> receiving your invite. The invite should come from your service, you
>> cannot do it p2p if that is what you tested. I have been testing
>> jigasi with asterisk with no problem.
>>
>> On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> wrote:
>> > Hi damencho,
>> >
>> > Thanks for the advice. I have setup jit-meet and jigasi on the same
>> > machine.
>> > I am able to do web meeting very well. I tried to send a SIP INVITE to
>> > myhost:5060 with header "Jitsi-Conference-Room: room1234" to
establish a
>> > meeting through SIP but the myhost:5060 never responds. Do I need to
>> > install
>> > additional component for jigasi to work as a SIP endpoint ?
>> >
>> > Thanks !
>> > Kai
>> >
>> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov <damencho@jitsi.org> > >> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> You can use jigasi for sip connectivity.
>> >> https://github.com/jitsi/jigasi
>> >> There is nothing to configure in videobridge as jigasi is as a client
>> >> to videobridge, everything is handled by jicofo and jitsi-meet.
>> >>
>> >> Regards
>> >> damencho
>> >>
>> >>
>> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> wrote:
>> >> > Hi, I would like to configure jitsi videobridge to work with
>> >> > freeswitch
>> >> > or
>> >> > asterisk so that people calling freeswitch or asterisk can join a
>> >> > video
>> >> > conference handled by jitsi videobridge. Would you please help to
>> >> > provide an
>> >> > instruction on how to configure both jitsi videobridge and
freeswitch
>> >> > or
>> >> > asterisk for this purpose ?
>> >> >
>> >> > Thanks a lot,
>> >> > Kai
>> >> >
>> >> > _______________________________________________
>> >> > dev mailing list
>> >> > dev@jitsi.org
>> >> > Unsubscribe instructions and other list options:
>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >> _______________________________________________
>> >> dev mailing list
>> >> dev@jitsi.org
>> >> Unsubscribe instructions and other list options:
>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#8

I installed freeswitch and try to use the existing user account 1000 for
jigasi. But calling to this account goes to voicemail. I suppose the jigasi
is not registering. How can I debug this problem ? I found my
sip-communicator.properties file for jigasi does not have any sip server
address specified by default apt-get installation.

Thanks and regards,
Kai

···

On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> wrote:

Okay thanks !

On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov <damencho@jitsi.org> wrote:

You just need username and password. And when you install jigasi it
asks for that info. I think it will work with
username@ip-address-freeswitch-is-listening-to and the password.

On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> wrote:
> I see. So I need to install freeswitch and connect jigasi with it. Do
you
> have an instruction on how to connect jigasi with a freeswitch
installed on
> the same host ?
>
> Thanks,
> Kai
>
> On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov <damencho@jitsi.org> >> wrote:
>>
>> Jigasi is just a sip client that registers to your sip service. You
>> need to check its logs whether it is registered and whether it is
>> receiving your invite. The invite should come from your service, you
>> cannot do it p2p if that is what you tested. I have been testing
>> jigasi with asterisk with no problem.
>>
>> On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> wrote:
>> > Hi damencho,
>> >
>> > Thanks for the advice. I have setup jit-meet and jigasi on the same
>> > machine.
>> > I am able to do web meeting very well. I tried to send a SIP INVITE
to
>> > myhost:5060 with header "Jitsi-Conference-Room: room1234" to
establish a
>> > meeting through SIP but the myhost:5060 never responds. Do I need to
>> > install
>> > additional component for jigasi to work as a SIP endpoint ?
>> >
>> > Thanks !
>> > Kai
>> >
>> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov <damencho@jitsi.org> >> >> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> You can use jigasi for sip connectivity.
>> >> https://github.com/jitsi/jigasi
>> >> There is nothing to configure in videobridge as jigasi is as a
client
>> >> to videobridge, everything is handled by jicofo and jitsi-meet.
>> >>
>> >> Regards
>> >> damencho
>> >>
>> >>
>> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> wrote:
>> >> > Hi, I would like to configure jitsi videobridge to work with
>> >> > freeswitch
>> >> > or
>> >> > asterisk so that people calling freeswitch or asterisk can join a
>> >> > video
>> >> > conference handled by jitsi videobridge. Would you please help to
>> >> > provide an
>> >> > instruction on how to configure both jitsi videobridge and
freeswitch
>> >> > or
>> >> > asterisk for this purpose ?
>> >> >
>> >> > Thanks a lot,
>> >> > Kai
>> >> >
>> >> > _______________________________________________
>> >> > dev mailing list
>> >> > dev@jitsi.org
>> >> > Unsubscribe instructions and other list options:
>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >> _______________________________________________
>> >> dev mailing list
>> >> dev@jitsi.org
>> >> Unsubscribe instructions and other list options:
>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#9

Hi,

So jigasi is using jitsi's protocol and account management
implementation. The easiest way it to install jitsi desktop client,
configure its sip account to work with freeswitch and then use its
configuration for jigasi sip account, you already saw the account
properties that are about the sip account, you can find similar and in
jitsi desktop client config.

Regards
damencho

···

On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> wrote:

I installed freeswitch and try to use the existing user account 1000 for
jigasi. But calling to this account goes to voicemail. I suppose the jigasi
is not registering. How can I debug this problem ? I found my
sip-communicator.properties file for jigasi does not have any sip server
address specified by default apt-get installation.

Thanks and regards,
Kai

On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> wrote:

Okay thanks !

On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov <damencho@jitsi.org> wrote:

You just need username and password. And when you install jigasi it
asks for that info. I think it will work with
username@ip-address-freeswitch-is-listening-to and the password.

On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> wrote:
> I see. So I need to install freeswitch and connect jigasi with it. Do
> you
> have an instruction on how to connect jigasi with a freeswitch
> installed on
> the same host ?
>
> Thanks,
> Kai
>
> On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov <damencho@jitsi.org> >>> > wrote:
>>
>> Jigasi is just a sip client that registers to your sip service. You
>> need to check its logs whether it is registered and whether it is
>> receiving your invite. The invite should come from your service, you
>> cannot do it p2p if that is what you tested. I have been testing
>> jigasi with asterisk with no problem.
>>
>> On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> wrote:
>> > Hi damencho,
>> >
>> > Thanks for the advice. I have setup jit-meet and jigasi on the same
>> > machine.
>> > I am able to do web meeting very well. I tried to send a SIP INVITE
>> > to
>> > myhost:5060 with header "Jitsi-Conference-Room: room1234" to
>> > establish a
>> > meeting through SIP but the myhost:5060 never responds. Do I need to
>> > install
>> > additional component for jigasi to work as a SIP endpoint ?
>> >
>> > Thanks !
>> > Kai
>> >
>> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov <damencho@jitsi.org> >>> >> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> You can use jigasi for sip connectivity.
>> >> https://github.com/jitsi/jigasi
>> >> There is nothing to configure in videobridge as jigasi is as a
>> >> client
>> >> to videobridge, everything is handled by jicofo and jitsi-meet.
>> >>
>> >> Regards
>> >> damencho
>> >>
>> >>
>> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> wrote:
>> >> > Hi, I would like to configure jitsi videobridge to work with
>> >> > freeswitch
>> >> > or
>> >> > asterisk so that people calling freeswitch or asterisk can join a
>> >> > video
>> >> > conference handled by jitsi videobridge. Would you please help to
>> >> > provide an
>> >> > instruction on how to configure both jitsi videobridge and
>> >> > freeswitch
>> >> > or
>> >> > asterisk for this purpose ?
>> >> >
>> >> > Thanks a lot,
>> >> > Kai
>> >> >
>> >> > _______________________________________________
>> >> > dev mailing list
>> >> > dev@jitsi.org
>> >> > Unsubscribe instructions and other list options:
>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >> _______________________________________________
>> >> dev mailing list
>> >> dev@jitsi.org
>> >> Unsubscribe instructions and other list options:
>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#10

Hi Damencho,

I have set up the freeswitch account ready and I can see jigasi registers
to freeswitch, receives the INVITE and replies 180. But it never proceed to
200 OK until timeout. Would you please let me know how I can debug this
problem ?

Thanks !
Kai

···

On Thu, Sep 22, 2016 at 2:17 PM, Damian Minkov <damencho@jitsi.org> wrote:

Hi,

So jigasi is using jitsi's protocol and account management
implementation. The easiest way it to install jitsi desktop client,
configure its sip account to work with freeswitch and then use its
configuration for jigasi sip account, you already saw the account
properties that are about the sip account, you can find similar and in
jitsi desktop client config.

Regards
damencho

On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> wrote:
> I installed freeswitch and try to use the existing user account 1000 for
> jigasi. But calling to this account goes to voicemail. I suppose the
jigasi
> is not registering. How can I debug this problem ? I found my
> sip-communicator.properties file for jigasi does not have any sip server
> address specified by default apt-get installation.
>
> Thanks and regards,
> Kai
>
> On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> wrote:
>>
>> Okay thanks !
>>
>> On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov <damencho@jitsi.org> > wrote:
>>>
>>> You just need username and password. And when you install jigasi it
>>> asks for that info. I think it will work with
>>> username@ip-address-freeswitch-is-listening-to and the password.
>>>
>>> On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> wrote:
>>> > I see. So I need to install freeswitch and connect jigasi with it. Do
>>> > you
>>> > have an instruction on how to connect jigasi with a freeswitch
>>> > installed on
>>> > the same host ?
>>> >
>>> > Thanks,
>>> > Kai
>>> >
>>> > On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov <damencho@jitsi.org> > >>> > wrote:
>>> >>
>>> >> Jigasi is just a sip client that registers to your sip service. You
>>> >> need to check its logs whether it is registered and whether it is
>>> >> receiving your invite. The invite should come from your service, you
>>> >> cannot do it p2p if that is what you tested. I have been testing
>>> >> jigasi with asterisk with no problem.
>>> >>
>>> >> On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> wrote:
>>> >> > Hi damencho,
>>> >> >
>>> >> > Thanks for the advice. I have setup jit-meet and jigasi on the
same
>>> >> > machine.
>>> >> > I am able to do web meeting very well. I tried to send a SIP
INVITE
>>> >> > to
>>> >> > myhost:5060 with header "Jitsi-Conference-Room: room1234" to
>>> >> > establish a
>>> >> > meeting through SIP but the myhost:5060 never responds. Do I need
to
>>> >> > install
>>> >> > additional component for jigasi to work as a SIP endpoint ?
>>> >> >
>>> >> > Thanks !
>>> >> > Kai
>>> >> >
>>> >> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov < > damencho@jitsi.org> > >>> >> > wrote:
>>> >> >>
>>> >> >> Hi,
>>> >> >>
>>> >> >> You can use jigasi for sip connectivity.
>>> >> >> https://github.com/jitsi/jigasi
>>> >> >> There is nothing to configure in videobridge as jigasi is as a
>>> >> >> client
>>> >> >> to videobridge, everything is handled by jicofo and jitsi-meet.
>>> >> >>
>>> >> >> Regards
>>> >> >> damencho
>>> >> >>
>>> >> >>
>>> >> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> > wrote:
>>> >> >> > Hi, I would like to configure jitsi videobridge to work with
>>> >> >> > freeswitch
>>> >> >> > or
>>> >> >> > asterisk so that people calling freeswitch or asterisk can
join a
>>> >> >> > video
>>> >> >> > conference handled by jitsi videobridge. Would you please help
to
>>> >> >> > provide an
>>> >> >> > instruction on how to configure both jitsi videobridge and
>>> >> >> > freeswitch
>>> >> >> > or
>>> >> >> > asterisk for this purpose ?
>>> >> >> >
>>> >> >> > Thanks a lot,
>>> >> >> > Kai
>>> >> >> >
>>> >> >> > _______________________________________________
>>> >> >> > dev mailing list
>>> >> >> > dev@jitsi.org
>>> >> >> > Unsubscribe instructions and other list options:
>>> >> >> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>
>>> >> >> _______________________________________________
>>> >> >> dev mailing list
>>> >> >> dev@jitsi.org
>>> >> >> Unsubscribe instructions and other list options:
>>> >> >> http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >
>>> >> >
>>> >> >
>>> >> > _______________________________________________
>>> >> > dev mailing list
>>> >> > dev@jitsi.org
>>> >> > Unsubscribe instructions and other list options:
>>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >>
>>> >> _______________________________________________
>>> >> dev mailing list
>>> >> dev@jitsi.org
>>> >> Unsubscribe instructions and other list options:
>>> >> http://lists.jitsi.org/mailman/listinfo/dev
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > dev mailing list
>>> > dev@jitsi.org
>>> > Unsubscribe instructions and other list options:
>>> > http://lists.jitsi.org/mailman/listinfo/dev
>>>
>>> _______________________________________________
>>> dev mailing list
>>> dev@jitsi.org
>>> Unsubscribe instructions and other list options:
>>> http://lists.jitsi.org/mailman/listinfo/dev
>>
>>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#11

What does jigasi logs say?

···

On Fri, Sep 23, 2016 at 10:42 AM, Kai K <kai328us@gmail.com> wrote:

Hi Damencho,

I have set up the freeswitch account ready and I can see jigasi registers to
freeswitch, receives the INVITE and replies 180. But it never proceed to 200
OK until timeout. Would you please let me know how I can debug this problem
?

Thanks !
Kai

On Thu, Sep 22, 2016 at 2:17 PM, Damian Minkov <damencho@jitsi.org> wrote:

Hi,

So jigasi is using jitsi's protocol and account management
implementation. The easiest way it to install jitsi desktop client,
configure its sip account to work with freeswitch and then use its
configuration for jigasi sip account, you already saw the account
properties that are about the sip account, you can find similar and in
jitsi desktop client config.

Regards
damencho

On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> wrote:
> I installed freeswitch and try to use the existing user account 1000 for
> jigasi. But calling to this account goes to voicemail. I suppose the
> jigasi
> is not registering. How can I debug this problem ? I found my
> sip-communicator.properties file for jigasi does not have any sip server
> address specified by default apt-get installation.
>
> Thanks and regards,
> Kai
>
> On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> wrote:
>>
>> Okay thanks !
>>
>> On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov <damencho@jitsi.org> >> >> wrote:
>>>
>>> You just need username and password. And when you install jigasi it
>>> asks for that info. I think it will work with
>>> username@ip-address-freeswitch-is-listening-to and the password.
>>>
>>> On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> wrote:
>>> > I see. So I need to install freeswitch and connect jigasi with it.
>>> > Do
>>> > you
>>> > have an instruction on how to connect jigasi with a freeswitch
>>> > installed on
>>> > the same host ?
>>> >
>>> > Thanks,
>>> > Kai
>>> >
>>> > On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov <damencho@jitsi.org> >> >>> > wrote:
>>> >>
>>> >> Jigasi is just a sip client that registers to your sip service. You
>>> >> need to check its logs whether it is registered and whether it is
>>> >> receiving your invite. The invite should come from your service,
>>> >> you
>>> >> cannot do it p2p if that is what you tested. I have been testing
>>> >> jigasi with asterisk with no problem.
>>> >>
>>> >> On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> wrote:
>>> >> > Hi damencho,
>>> >> >
>>> >> > Thanks for the advice. I have setup jit-meet and jigasi on the
>>> >> > same
>>> >> > machine.
>>> >> > I am able to do web meeting very well. I tried to send a SIP
>>> >> > INVITE
>>> >> > to
>>> >> > myhost:5060 with header "Jitsi-Conference-Room: room1234" to
>>> >> > establish a
>>> >> > meeting through SIP but the myhost:5060 never responds. Do I need
>>> >> > to
>>> >> > install
>>> >> > additional component for jigasi to work as a SIP endpoint ?
>>> >> >
>>> >> > Thanks !
>>> >> > Kai
>>> >> >
>>> >> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov >> >>> >> > <damencho@jitsi.org> >> >>> >> > wrote:
>>> >> >>
>>> >> >> Hi,
>>> >> >>
>>> >> >> You can use jigasi for sip connectivity.
>>> >> >> https://github.com/jitsi/jigasi
>>> >> >> There is nothing to configure in videobridge as jigasi is as a
>>> >> >> client
>>> >> >> to videobridge, everything is handled by jicofo and jitsi-meet.
>>> >> >>
>>> >> >> Regards
>>> >> >> damencho
>>> >> >>
>>> >> >>
>>> >> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> >> >>> >> >> wrote:
>>> >> >> > Hi, I would like to configure jitsi videobridge to work with
>>> >> >> > freeswitch
>>> >> >> > or
>>> >> >> > asterisk so that people calling freeswitch or asterisk can
>>> >> >> > join a
>>> >> >> > video
>>> >> >> > conference handled by jitsi videobridge. Would you please help
>>> >> >> > to
>>> >> >> > provide an
>>> >> >> > instruction on how to configure both jitsi videobridge and
>>> >> >> > freeswitch
>>> >> >> > or
>>> >> >> > asterisk for this purpose ?
>>> >> >> >
>>> >> >> > Thanks a lot,
>>> >> >> > Kai
>>> >> >> >
>>> >> >> > _______________________________________________
>>> >> >> > dev mailing list
>>> >> >> > dev@jitsi.org
>>> >> >> > Unsubscribe instructions and other list options:
>>> >> >> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>
>>> >> >> _______________________________________________
>>> >> >> dev mailing list
>>> >> >> dev@jitsi.org
>>> >> >> Unsubscribe instructions and other list options:
>>> >> >> http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >
>>> >> >
>>> >> >
>>> >> > _______________________________________________
>>> >> > dev mailing list
>>> >> > dev@jitsi.org
>>> >> > Unsubscribe instructions and other list options:
>>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >>
>>> >> _______________________________________________
>>> >> dev mailing list
>>> >> dev@jitsi.org
>>> >> Unsubscribe instructions and other list options:
>>> >> http://lists.jitsi.org/mailman/listinfo/dev
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > dev mailing list
>>> > dev@jitsi.org
>>> > Unsubscribe instructions and other list options:
>>> > http://lists.jitsi.org/mailman/listinfo/dev
>>>
>>> _______________________________________________
>>> dev mailing list
>>> dev@jitsi.org
>>> Unsubscribe instructions and other list options:
>>> http://lists.jitsi.org/mailman/listinfo/dev
>>
>>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#12

Looks like the log complains :

2016-09-23 17:36:35.040 INFO: [52]
org.jitsi.jigasi.JvbConference.registrationStateChanged().544 XMPP
(157581ec3bd@callcontrol.10.71.18.104): RegistrationStateChangeEvent[
oldState=Unregistered; newState=RegistrationState=Registering;
reasonCode=-1; reason=null]
2016-09-23 17:36:35.052 SEVERE: [52]
service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged().201
An error occurred while executing
RegistrationStateChangeListener#registrationStateChanged(RegistrationStateChangeEvent)
of
net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl$RegistrationStateListener@6b57a931
java.lang.IllegalArgumentException: Connection cannot be anonymous
        at
org.jivesoftware.smackx.packet.VCard.checkAuthenticated(VCard.java:571)
        at org.jivesoftware.smackx.packet.VCard.load(VCard.java:511)
        at
net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl.createAccountPhotoPresenceInterceptor(OperationSetPersistentPresenceJabberImpl.java:1898)
        at
net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl$RegistrationStateListener.registrationStateChanged(OperationSetPersistentPresenceJabberImpl.java:1106)
        at
net.java.sip.communicator.service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged(AbstractProtocolProviderService.java:187)
        at
net.java.sip.communicator.service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged(AbstractProtocolProviderService.java:141)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.connectAndLogin(ProtocolProviderServiceJabberImpl.java:1314)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.connectAndLogin(ProtocolProviderServiceJabberImpl.java:944)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.initializeConnectAndLogin(ProtocolProviderServiceJabberImpl.java:755)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.register(ProtocolProviderServiceJabberImpl.java:468)
        at org.jitsi.jigasi.RegisterThread.run(RegisterThread.java:58)
2016-09-23 17:36:35.064 WARNING: [58]
impl.protocol.jabber.OperationSetBasicInstantMessagingJabberImpl.isCarbonSupported().775
Failed to retrieve carbon support.not-allowed(-1) Communication with remote
domains is not enabled
2016-09-23 17:36:35.072 SEVERE: [60]
impl.protocol.jabber.InfoRetreiver.retrieveDetails().361 Cannot load
details for contact 157581ec3bd@10.71.18.104 : item-not-found(-1

Regards,
Kai

···

On Fri, Sep 23, 2016 at 12:05 PM, Damian Minkov <damencho@jitsi.org> wrote:

What does jigasi logs say?

On Fri, Sep 23, 2016 at 10:42 AM, Kai K <kai328us@gmail.com> wrote:
> Hi Damencho,
>
> I have set up the freeswitch account ready and I can see jigasi
registers to
> freeswitch, receives the INVITE and replies 180. But it never proceed to
200
> OK until timeout. Would you please let me know how I can debug this
problem
> ?
>
> Thanks !
> Kai
>
> On Thu, Sep 22, 2016 at 2:17 PM, Damian Minkov <damencho@jitsi.org> > wrote:
>>
>> Hi,
>>
>> So jigasi is using jitsi's protocol and account management
>> implementation. The easiest way it to install jitsi desktop client,
>> configure its sip account to work with freeswitch and then use its
>> configuration for jigasi sip account, you already saw the account
>> properties that are about the sip account, you can find similar and in
>> jitsi desktop client config.
>>
>> Regards
>> damencho
>>
>>
>> On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> wrote:
>> > I installed freeswitch and try to use the existing user account 1000
for
>> > jigasi. But calling to this account goes to voicemail. I suppose the
>> > jigasi
>> > is not registering. How can I debug this problem ? I found my
>> > sip-communicator.properties file for jigasi does not have any sip
server
>> > address specified by default apt-get installation.
>> >
>> > Thanks and regards,
>> > Kai
>> >
>> > On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> wrote:
>> >>
>> >> Okay thanks !
>> >>
>> >> On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov <damencho@jitsi.org> > >> >> wrote:
>> >>>
>> >>> You just need username and password. And when you install jigasi it
>> >>> asks for that info. I think it will work with
>> >>> username@ip-address-freeswitch-is-listening-to and the password.
>> >>>
>> >>> On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> wrote:
>> >>> > I see. So I need to install freeswitch and connect jigasi with it.
>> >>> > Do
>> >>> > you
>> >>> > have an instruction on how to connect jigasi with a freeswitch
>> >>> > installed on
>> >>> > the same host ?
>> >>> >
>> >>> > Thanks,
>> >>> > Kai
>> >>> >
>> >>> > On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov < > damencho@jitsi.org> > >> >>> > wrote:
>> >>> >>
>> >>> >> Jigasi is just a sip client that registers to your sip service.
You
>> >>> >> need to check its logs whether it is registered and whether it is
>> >>> >> receiving your invite. The invite should come from your service,
>> >>> >> you
>> >>> >> cannot do it p2p if that is what you tested. I have been testing
>> >>> >> jigasi with asterisk with no problem.
>> >>> >>
>> >>> >> On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> > wrote:
>> >>> >> > Hi damencho,
>> >>> >> >
>> >>> >> > Thanks for the advice. I have setup jit-meet and jigasi on the
>> >>> >> > same
>> >>> >> > machine.
>> >>> >> > I am able to do web meeting very well. I tried to send a SIP
>> >>> >> > INVITE
>> >>> >> > to
>> >>> >> > myhost:5060 with header "Jitsi-Conference-Room: room1234" to
>> >>> >> > establish a
>> >>> >> > meeting through SIP but the myhost:5060 never responds. Do I
need
>> >>> >> > to
>> >>> >> > install
>> >>> >> > additional component for jigasi to work as a SIP endpoint ?
>> >>> >> >
>> >>> >> > Thanks !
>> >>> >> > Kai
>> >>> >> >
>> >>> >> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov > >> >>> >> > <damencho@jitsi.org> > >> >>> >> > wrote:
>> >>> >> >>
>> >>> >> >> Hi,
>> >>> >> >>
>> >>> >> >> You can use jigasi for sip connectivity.
>> >>> >> >> https://github.com/jitsi/jigasi
>> >>> >> >> There is nothing to configure in videobridge as jigasi is as a
>> >>> >> >> client
>> >>> >> >> to videobridge, everything is handled by jicofo and
jitsi-meet.
>> >>> >> >>
>> >>> >> >> Regards
>> >>> >> >> damencho
>> >>> >> >>
>> >>> >> >>
>> >>> >> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> > >> >>> >> >> wrote:
>> >>> >> >> > Hi, I would like to configure jitsi videobridge to work with
>> >>> >> >> > freeswitch
>> >>> >> >> > or
>> >>> >> >> > asterisk so that people calling freeswitch or asterisk can
>> >>> >> >> > join a
>> >>> >> >> > video
>> >>> >> >> > conference handled by jitsi videobridge. Would you please
help
>> >>> >> >> > to
>> >>> >> >> > provide an
>> >>> >> >> > instruction on how to configure both jitsi videobridge and
>> >>> >> >> > freeswitch
>> >>> >> >> > or
>> >>> >> >> > asterisk for this purpose ?
>> >>> >> >> >
>> >>> >> >> > Thanks a lot,
>> >>> >> >> > Kai
>> >>> >> >> >
>> >>> >> >> > _______________________________________________
>> >>> >> >> > dev mailing list
>> >>> >> >> > dev@jitsi.org
>> >>> >> >> > Unsubscribe instructions and other list options:
>> >>> >> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>
>> >>> >> >> _______________________________________________
>> >>> >> >> dev mailing list
>> >>> >> >> dev@jitsi.org
>> >>> >> >> Unsubscribe instructions and other list options:
>> >>> >> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > _______________________________________________
>> >>> >> > dev mailing list
>> >>> >> > dev@jitsi.org
>> >>> >> > Unsubscribe instructions and other list options:
>> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >>
>> >>> >> _______________________________________________
>> >>> >> dev mailing list
>> >>> >> dev@jitsi.org
>> >>> >> Unsubscribe instructions and other list options:
>> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >
>> >>> >
>> >>> >
>> >>> > _______________________________________________
>> >>> > dev mailing list
>> >>> > dev@jitsi.org
>> >>> > Unsubscribe instructions and other list options:
>> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>>
>> >>> _______________________________________________
>> >>> dev mailing list
>> >>> dev@jitsi.org
>> >>> Unsubscribe instructions and other list options:
>> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#13

Nope, this is not an actual problem and this errors are normal. We
should add a property and disable this functionality as it is not used
by jigasi.
You should check about some sip related logs, once you try the sip
invite and it fails.

···

On Fri, Sep 23, 2016 at 12:41 PM, Kai K <kai328us@gmail.com> wrote:

Looks like the log complains :

2016-09-23 17:36:35.040 INFO: [52]
org.jitsi.jigasi.JvbConference.registrationStateChanged().544 XMPP
(157581ec3bd@callcontrol.10.71.18.104): RegistrationStateChangeEvent[
oldState=Unregistered; newState=RegistrationState=Registering;
reasonCode=-1; reason=null]
2016-09-23 17:36:35.052 SEVERE: [52]
service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged().201
An error occurred while executing
RegistrationStateChangeListener#registrationStateChanged(RegistrationStateChangeEvent)
of
net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl$RegistrationStateListener@6b57a931
java.lang.IllegalArgumentException: Connection cannot be anonymous
        at
org.jivesoftware.smackx.packet.VCard.checkAuthenticated(VCard.java:571)
        at org.jivesoftware.smackx.packet.VCard.load(VCard.java:511)
        at
net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl.createAccountPhotoPresenceInterceptor(OperationSetPersistentPresenceJabberImpl.java:1898)
        at
net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl$RegistrationStateListener.registrationStateChanged(OperationSetPersistentPresenceJabberImpl.java:1106)
        at
net.java.sip.communicator.service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged(AbstractProtocolProviderService.java:187)
        at
net.java.sip.communicator.service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged(AbstractProtocolProviderService.java:141)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.connectAndLogin(ProtocolProviderServiceJabberImpl.java:1314)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.connectAndLogin(ProtocolProviderServiceJabberImpl.java:944)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.initializeConnectAndLogin(ProtocolProviderServiceJabberImpl.java:755)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.register(ProtocolProviderServiceJabberImpl.java:468)
        at org.jitsi.jigasi.RegisterThread.run(RegisterThread.java:58)
2016-09-23 17:36:35.064 WARNING: [58]
impl.protocol.jabber.OperationSetBasicInstantMessagingJabberImpl.isCarbonSupported().775
Failed to retrieve carbon support.not-allowed(-1) Communication with remote
domains is not enabled
2016-09-23 17:36:35.072 SEVERE: [60]
impl.protocol.jabber.InfoRetreiver.retrieveDetails().361 Cannot load details
for contact 157581ec3bd@10.71.18.104 : item-not-found(-1

Regards,
Kai

On Fri, Sep 23, 2016 at 12:05 PM, Damian Minkov <damencho@jitsi.org> wrote:

What does jigasi logs say?

On Fri, Sep 23, 2016 at 10:42 AM, Kai K <kai328us@gmail.com> wrote:
> Hi Damencho,
>
> I have set up the freeswitch account ready and I can see jigasi
> registers to
> freeswitch, receives the INVITE and replies 180. But it never proceed to
> 200
> OK until timeout. Would you please let me know how I can debug this
> problem
> ?
>
> Thanks !
> Kai
>
> On Thu, Sep 22, 2016 at 2:17 PM, Damian Minkov <damencho@jitsi.org> >> > wrote:
>>
>> Hi,
>>
>> So jigasi is using jitsi's protocol and account management
>> implementation. The easiest way it to install jitsi desktop client,
>> configure its sip account to work with freeswitch and then use its
>> configuration for jigasi sip account, you already saw the account
>> properties that are about the sip account, you can find similar and in
>> jitsi desktop client config.
>>
>> Regards
>> damencho
>>
>>
>> On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> wrote:
>> > I installed freeswitch and try to use the existing user account 1000
>> > for
>> > jigasi. But calling to this account goes to voicemail. I suppose the
>> > jigasi
>> > is not registering. How can I debug this problem ? I found my
>> > sip-communicator.properties file for jigasi does not have any sip
>> > server
>> > address specified by default apt-get installation.
>> >
>> > Thanks and regards,
>> > Kai
>> >
>> > On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> wrote:
>> >>
>> >> Okay thanks !
>> >>
>> >> On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov <damencho@jitsi.org> >> >> >> wrote:
>> >>>
>> >>> You just need username and password. And when you install jigasi it
>> >>> asks for that info. I think it will work with
>> >>> username@ip-address-freeswitch-is-listening-to and the password.
>> >>>
>> >>> On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> wrote:
>> >>> > I see. So I need to install freeswitch and connect jigasi with
>> >>> > it.
>> >>> > Do
>> >>> > you
>> >>> > have an instruction on how to connect jigasi with a freeswitch
>> >>> > installed on
>> >>> > the same host ?
>> >>> >
>> >>> > Thanks,
>> >>> > Kai
>> >>> >
>> >>> > On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov >> >> >>> > <damencho@jitsi.org> >> >> >>> > wrote:
>> >>> >>
>> >>> >> Jigasi is just a sip client that registers to your sip service.
>> >>> >> You
>> >>> >> need to check its logs whether it is registered and whether it
>> >>> >> is
>> >>> >> receiving your invite. The invite should come from your service,
>> >>> >> you
>> >>> >> cannot do it p2p if that is what you tested. I have been testing
>> >>> >> jigasi with asterisk with no problem.
>> >>> >>
>> >>> >> On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> >> >> >>> >> wrote:
>> >>> >> > Hi damencho,
>> >>> >> >
>> >>> >> > Thanks for the advice. I have setup jit-meet and jigasi on the
>> >>> >> > same
>> >>> >> > machine.
>> >>> >> > I am able to do web meeting very well. I tried to send a SIP
>> >>> >> > INVITE
>> >>> >> > to
>> >>> >> > myhost:5060 with header "Jitsi-Conference-Room: room1234" to
>> >>> >> > establish a
>> >>> >> > meeting through SIP but the myhost:5060 never responds. Do I
>> >>> >> > need
>> >>> >> > to
>> >>> >> > install
>> >>> >> > additional component for jigasi to work as a SIP endpoint ?
>> >>> >> >
>> >>> >> > Thanks !
>> >>> >> > Kai
>> >>> >> >
>> >>> >> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov >> >> >>> >> > <damencho@jitsi.org> >> >> >>> >> > wrote:
>> >>> >> >>
>> >>> >> >> Hi,
>> >>> >> >>
>> >>> >> >> You can use jigasi for sip connectivity.
>> >>> >> >> https://github.com/jitsi/jigasi
>> >>> >> >> There is nothing to configure in videobridge as jigasi is as
>> >>> >> >> a
>> >>> >> >> client
>> >>> >> >> to videobridge, everything is handled by jicofo and
>> >>> >> >> jitsi-meet.
>> >>> >> >>
>> >>> >> >> Regards
>> >>> >> >> damencho
>> >>> >> >>
>> >>> >> >>
>> >>> >> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> >> >> >>> >> >> wrote:
>> >>> >> >> > Hi, I would like to configure jitsi videobridge to work
>> >>> >> >> > with
>> >>> >> >> > freeswitch
>> >>> >> >> > or
>> >>> >> >> > asterisk so that people calling freeswitch or asterisk can
>> >>> >> >> > join a
>> >>> >> >> > video
>> >>> >> >> > conference handled by jitsi videobridge. Would you please
>> >>> >> >> > help
>> >>> >> >> > to
>> >>> >> >> > provide an
>> >>> >> >> > instruction on how to configure both jitsi videobridge and
>> >>> >> >> > freeswitch
>> >>> >> >> > or
>> >>> >> >> > asterisk for this purpose ?
>> >>> >> >> >
>> >>> >> >> > Thanks a lot,
>> >>> >> >> > Kai
>> >>> >> >> >
>> >>> >> >> > _______________________________________________
>> >>> >> >> > dev mailing list
>> >>> >> >> > dev@jitsi.org
>> >>> >> >> > Unsubscribe instructions and other list options:
>> >>> >> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>
>> >>> >> >> _______________________________________________
>> >>> >> >> dev mailing list
>> >>> >> >> dev@jitsi.org
>> >>> >> >> Unsubscribe instructions and other list options:
>> >>> >> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > _______________________________________________
>> >>> >> > dev mailing list
>> >>> >> > dev@jitsi.org
>> >>> >> > Unsubscribe instructions and other list options:
>> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >>
>> >>> >> _______________________________________________
>> >>> >> dev mailing list
>> >>> >> dev@jitsi.org
>> >>> >> Unsubscribe instructions and other list options:
>> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >
>> >>> >
>> >>> >
>> >>> > _______________________________________________
>> >>> > dev mailing list
>> >>> > dev@jitsi.org
>> >>> > Unsubscribe instructions and other list options:
>> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>>
>> >>> _______________________________________________
>> >>> dev mailing list
>> >>> dev@jitsi.org
>> >>> Unsubscribe instructions and other list options:
>> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#14

I notice my jigasi conf has a section of default values.

# If you want jigasi to perform authenticated login instead of anonymous
login
# to the XMPP server, you can set the following properties.
# org.jitsi.jigasi.xmpp.acc.USER_ID=SOME_USER@SOME_DOMAIN
# org.jitsi.jigasi.xmpp.acc.PASS=SOME_PASS
# org.jitsi.jigasi.xmpp.acc.ANONYMOUS_AUTH=false

# If you want to use the SIP user part of the incoming/outgoing call SIP URI
# you can set the following property to true.
# org.jitsi.jigasi.USE_SIP_USER_AS_XMPP_RESOURCE=true

# Activate this property if you are using self-signed certificates or other
# type of non-trusted certicates. In this mode your service trust in the
# remote certificates always.
# net.java.sip.communicator.service.gui.ALWAYS_TRUST_MODE_ENABLED=true

Should I change it and how ?

Thanks,
Kai

···

On Fri, Sep 23, 2016 at 1:41 PM, Kai K <kai328us@gmail.com> wrote:

Looks like the log complains :

2016-09-23 17:36:35.040 INFO: [52] org.jitsi.jigasi.JvbConference.registrationStateChanged().544
XMPP (157581ec3bd@callcontrol.10.71.18.104):
RegistrationStateChangeEvent[ oldState=Unregistered;
newState=RegistrationState=Registering; reasonCode=-1; reason=null]
2016-09-23 17:36:35.052 SEVERE: [52] service.protocol.
AbstractProtocolProviderService.fireRegistrationStateChanged().201 An
error occurred while executing RegistrationStateChangeListene
r#registrationStateChanged(RegistrationStateChangeEvent) of
net.java.sip.communicator.impl.protocol.jabber.
OperationSetPersistentPresenceJabberImpl$RegistrationStateListener@
6b57a931
java.lang.IllegalArgumentException: Connection cannot be anonymous
        at org.jivesoftware.smackx.packet.VCard.
checkAuthenticated(VCard.java:571)
        at org.jivesoftware.smackx.packet.VCard.load(VCard.java:511)
        at net.java.sip.communicator.impl.protocol.jabber.
OperationSetPersistentPresenceJabberImpl.createAccountPhotoPresenceInte
rceptor(OperationSetPersistentPresenceJabberImpl.java:1898)
        at net.java.sip.communicator.impl.protocol.jabber.
OperationSetPersistentPresenceJabberImpl$RegistrationStateListener.
registrationStateChanged(OperationSetPersistentPresence
JabberImpl.java:1106)
        at net.java.sip.communicator.service.protocol.
AbstractProtocolProviderService.fireRegistrationStateChanged(
AbstractProtocolProviderService.java:187)
        at net.java.sip.communicator.service.protocol.
AbstractProtocolProviderService.fireRegistrationStateChanged(
AbstractProtocolProviderService.java:141)
        at net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.connectAndLogin(
ProtocolProviderServiceJabberImpl.java:1314)
        at net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.connectAndLogin(
ProtocolProviderServiceJabberImpl.java:944)
        at net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.initializeConnectAndLogin(
ProtocolProviderServiceJabberImpl.java:755)
        at net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.register(ProtocolProviderServiceJabberI
mpl.java:468)
        at org.jitsi.jigasi.RegisterThread.run(RegisterThread.java:58)
2016-09-23 17:36:35.064 WARNING: [58] impl.protocol.jabber.
OperationSetBasicInstantMessagingJabberImpl.isCarbonSupported().775
Failed to retrieve carbon support.not-allowed(-1) Communication with remote
domains is not enabled
2016-09-23 17:36:35.072 SEVERE: [60] impl.protocol.jabber.
InfoRetreiver.retrieveDetails().361 Cannot load details for contact
157581ec3bd@10.71.18.104 : item-not-found(-1

Regards,
Kai

On Fri, Sep 23, 2016 at 12:05 PM, Damian Minkov <damencho@jitsi.org> > wrote:

What does jigasi logs say?

On Fri, Sep 23, 2016 at 10:42 AM, Kai K <kai328us@gmail.com> wrote:
> Hi Damencho,
>
> I have set up the freeswitch account ready and I can see jigasi
registers to
> freeswitch, receives the INVITE and replies 180. But it never proceed
to 200
> OK until timeout. Would you please let me know how I can debug this
problem
> ?
>
> Thanks !
> Kai
>
> On Thu, Sep 22, 2016 at 2:17 PM, Damian Minkov <damencho@jitsi.org> >> wrote:
>>
>> Hi,
>>
>> So jigasi is using jitsi's protocol and account management
>> implementation. The easiest way it to install jitsi desktop client,
>> configure its sip account to work with freeswitch and then use its
>> configuration for jigasi sip account, you already saw the account
>> properties that are about the sip account, you can find similar and in
>> jitsi desktop client config.
>>
>> Regards
>> damencho
>>
>>
>> On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> wrote:
>> > I installed freeswitch and try to use the existing user account 1000
for
>> > jigasi. But calling to this account goes to voicemail. I suppose the
>> > jigasi
>> > is not registering. How can I debug this problem ? I found my
>> > sip-communicator.properties file for jigasi does not have any sip
server
>> > address specified by default apt-get installation.
>> >
>> > Thanks and regards,
>> > Kai
>> >
>> > On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> wrote:
>> >>
>> >> Okay thanks !
>> >>
>> >> On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov <damencho@jitsi.org> >> >> >> wrote:
>> >>>
>> >>> You just need username and password. And when you install jigasi it
>> >>> asks for that info. I think it will work with
>> >>> username@ip-address-freeswitch-is-listening-to and the password.
>> >>>
>> >>> On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> wrote:
>> >>> > I see. So I need to install freeswitch and connect jigasi with
it.
>> >>> > Do
>> >>> > you
>> >>> > have an instruction on how to connect jigasi with a freeswitch
>> >>> > installed on
>> >>> > the same host ?
>> >>> >
>> >>> > Thanks,
>> >>> > Kai
>> >>> >
>> >>> > On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov < >> damencho@jitsi.org> >> >> >>> > wrote:
>> >>> >>
>> >>> >> Jigasi is just a sip client that registers to your sip service.
You
>> >>> >> need to check its logs whether it is registered and whether it
is
>> >>> >> receiving your invite. The invite should come from your service,
>> >>> >> you
>> >>> >> cannot do it p2p if that is what you tested. I have been testing
>> >>> >> jigasi with asterisk with no problem.
>> >>> >>
>> >>> >> On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> >> wrote:
>> >>> >> > Hi damencho,
>> >>> >> >
>> >>> >> > Thanks for the advice. I have setup jit-meet and jigasi on the
>> >>> >> > same
>> >>> >> > machine.
>> >>> >> > I am able to do web meeting very well. I tried to send a SIP
>> >>> >> > INVITE
>> >>> >> > to
>> >>> >> > myhost:5060 with header "Jitsi-Conference-Room: room1234" to
>> >>> >> > establish a
>> >>> >> > meeting through SIP but the myhost:5060 never responds. Do I
need
>> >>> >> > to
>> >>> >> > install
>> >>> >> > additional component for jigasi to work as a SIP endpoint ?
>> >>> >> >
>> >>> >> > Thanks !
>> >>> >> > Kai
>> >>> >> >
>> >>> >> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov >> >> >>> >> > <damencho@jitsi.org> >> >> >>> >> > wrote:
>> >>> >> >>
>> >>> >> >> Hi,
>> >>> >> >>
>> >>> >> >> You can use jigasi for sip connectivity.
>> >>> >> >> https://github.com/jitsi/jigasi
>> >>> >> >> There is nothing to configure in videobridge as jigasi is as
a
>> >>> >> >> client
>> >>> >> >> to videobridge, everything is handled by jicofo and
jitsi-meet.
>> >>> >> >>
>> >>> >> >> Regards
>> >>> >> >> damencho
>> >>> >> >>
>> >>> >> >>
>> >>> >> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> >> >> >>> >> >> wrote:
>> >>> >> >> > Hi, I would like to configure jitsi videobridge to work
with
>> >>> >> >> > freeswitch
>> >>> >> >> > or
>> >>> >> >> > asterisk so that people calling freeswitch or asterisk can
>> >>> >> >> > join a
>> >>> >> >> > video
>> >>> >> >> > conference handled by jitsi videobridge. Would you please
help
>> >>> >> >> > to
>> >>> >> >> > provide an
>> >>> >> >> > instruction on how to configure both jitsi videobridge and
>> >>> >> >> > freeswitch
>> >>> >> >> > or
>> >>> >> >> > asterisk for this purpose ?
>> >>> >> >> >
>> >>> >> >> > Thanks a lot,
>> >>> >> >> > Kai
>> >>> >> >> >
>> >>> >> >> > _______________________________________________
>> >>> >> >> > dev mailing list
>> >>> >> >> > dev@jitsi.org
>> >>> >> >> > Unsubscribe instructions and other list options:
>> >>> >> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>
>> >>> >> >> _______________________________________________
>> >>> >> >> dev mailing list
>> >>> >> >> dev@jitsi.org
>> >>> >> >> Unsubscribe instructions and other list options:
>> >>> >> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > _______________________________________________
>> >>> >> > dev mailing list
>> >>> >> > dev@jitsi.org
>> >>> >> > Unsubscribe instructions and other list options:
>> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >>
>> >>> >> _______________________________________________
>> >>> >> dev mailing list
>> >>> >> dev@jitsi.org
>> >>> >> Unsubscribe instructions and other list options:
>> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >
>> >>> >
>> >>> >
>> >>> > _______________________________________________
>> >>> > dev mailing list
>> >>> > dev@jitsi.org
>> >>> > Unsubscribe instructions and other list options:
>> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>>
>> >>> _______________________________________________
>> >>> dev mailing list
>> >>> dev@jitsi.org
>> >>> Unsubscribe instructions and other list options:
>> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#15

Nope. The first part is if you are using xmpp authentication on the server.
Not sure about the last one, if you see some certificate errors in
your logs you should enable it. You can try enabling that property, it
will just avoid any kind of certificate validation.

···

On Fri, Sep 23, 2016 at 12:44 PM, Kai K <kai328us@gmail.com> wrote:

I notice my jigasi conf has a section of default values.

# If you want jigasi to perform authenticated login instead of anonymous
login
# to the XMPP server, you can set the following properties.
# org.jitsi.jigasi.xmpp.acc.USER_ID=SOME_USER@SOME_DOMAIN
# org.jitsi.jigasi.xmpp.acc.PASS=SOME_PASS
# org.jitsi.jigasi.xmpp.acc.ANONYMOUS_AUTH=false

# If you want to use the SIP user part of the incoming/outgoing call SIP URI
# you can set the following property to true.
# org.jitsi.jigasi.USE_SIP_USER_AS_XMPP_RESOURCE=true

# Activate this property if you are using self-signed certificates or other
# type of non-trusted certicates. In this mode your service trust in the
# remote certificates always.
# net.java.sip.communicator.service.gui.ALWAYS_TRUST_MODE_ENABLED=true

Should I change it and how ?

Thanks,
Kai

On Fri, Sep 23, 2016 at 1:41 PM, Kai K <kai328us@gmail.com> wrote:

Looks like the log complains :

2016-09-23 17:36:35.040 INFO: [52]
org.jitsi.jigasi.JvbConference.registrationStateChanged().544 XMPP
(157581ec3bd@callcontrol.10.71.18.104): RegistrationStateChangeEvent[
oldState=Unregistered; newState=RegistrationState=Registering;
reasonCode=-1; reason=null]
2016-09-23 17:36:35.052 SEVERE: [52]
service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged().201
An error occurred while executing
RegistrationStateChangeListener#registrationStateChanged(RegistrationStateChangeEvent)
of
net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl$RegistrationStateListener@6b57a931
java.lang.IllegalArgumentException: Connection cannot be anonymous
        at
org.jivesoftware.smackx.packet.VCard.checkAuthenticated(VCard.java:571)
        at org.jivesoftware.smackx.packet.VCard.load(VCard.java:511)
        at
net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl.createAccountPhotoPresenceInterceptor(OperationSetPersistentPresenceJabberImpl.java:1898)
        at
net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl$RegistrationStateListener.registrationStateChanged(OperationSetPersistentPresenceJabberImpl.java:1106)
        at
net.java.sip.communicator.service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged(AbstractProtocolProviderService.java:187)
        at
net.java.sip.communicator.service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged(AbstractProtocolProviderService.java:141)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.connectAndLogin(ProtocolProviderServiceJabberImpl.java:1314)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.connectAndLogin(ProtocolProviderServiceJabberImpl.java:944)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.initializeConnectAndLogin(ProtocolProviderServiceJabberImpl.java:755)
        at
net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.register(ProtocolProviderServiceJabberImpl.java:468)
        at org.jitsi.jigasi.RegisterThread.run(RegisterThread.java:58)
2016-09-23 17:36:35.064 WARNING: [58]
impl.protocol.jabber.OperationSetBasicInstantMessagingJabberImpl.isCarbonSupported().775
Failed to retrieve carbon support.not-allowed(-1) Communication with remote
domains is not enabled
2016-09-23 17:36:35.072 SEVERE: [60]
impl.protocol.jabber.InfoRetreiver.retrieveDetails().361 Cannot load details
for contact 157581ec3bd@10.71.18.104 : item-not-found(-1

Regards,
Kai

On Fri, Sep 23, 2016 at 12:05 PM, Damian Minkov <damencho@jitsi.org> >> wrote:

What does jigasi logs say?

On Fri, Sep 23, 2016 at 10:42 AM, Kai K <kai328us@gmail.com> wrote:
> Hi Damencho,
>
> I have set up the freeswitch account ready and I can see jigasi
> registers to
> freeswitch, receives the INVITE and replies 180. But it never proceed
> to 200
> OK until timeout. Would you please let me know how I can debug this
> problem
> ?
>
> Thanks !
> Kai
>
> On Thu, Sep 22, 2016 at 2:17 PM, Damian Minkov <damencho@jitsi.org> >>> > wrote:
>>
>> Hi,
>>
>> So jigasi is using jitsi's protocol and account management
>> implementation. The easiest way it to install jitsi desktop client,
>> configure its sip account to work with freeswitch and then use its
>> configuration for jigasi sip account, you already saw the account
>> properties that are about the sip account, you can find similar and in
>> jitsi desktop client config.
>>
>> Regards
>> damencho
>>
>>
>> On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> wrote:
>> > I installed freeswitch and try to use the existing user account 1000
>> > for
>> > jigasi. But calling to this account goes to voicemail. I suppose the
>> > jigasi
>> > is not registering. How can I debug this problem ? I found my
>> > sip-communicator.properties file for jigasi does not have any sip
>> > server
>> > address specified by default apt-get installation.
>> >
>> > Thanks and regards,
>> > Kai
>> >
>> > On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> wrote:
>> >>
>> >> Okay thanks !
>> >>
>> >> On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov <damencho@jitsi.org> >>> >> >> wrote:
>> >>>
>> >>> You just need username and password. And when you install jigasi
>> >>> it
>> >>> asks for that info. I think it will work with
>> >>> username@ip-address-freeswitch-is-listening-to and the password.
>> >>>
>> >>> On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> wrote:
>> >>> > I see. So I need to install freeswitch and connect jigasi with
>> >>> > it.
>> >>> > Do
>> >>> > you
>> >>> > have an instruction on how to connect jigasi with a freeswitch
>> >>> > installed on
>> >>> > the same host ?
>> >>> >
>> >>> > Thanks,
>> >>> > Kai
>> >>> >
>> >>> > On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov >>> >> >>> > <damencho@jitsi.org> >>> >> >>> > wrote:
>> >>> >>
>> >>> >> Jigasi is just a sip client that registers to your sip service.
>> >>> >> You
>> >>> >> need to check its logs whether it is registered and whether it
>> >>> >> is
>> >>> >> receiving your invite. The invite should come from your
>> >>> >> service,
>> >>> >> you
>> >>> >> cannot do it p2p if that is what you tested. I have been
>> >>> >> testing
>> >>> >> jigasi with asterisk with no problem.
>> >>> >>
>> >>> >> On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> >>> >> >>> >> wrote:
>> >>> >> > Hi damencho,
>> >>> >> >
>> >>> >> > Thanks for the advice. I have setup jit-meet and jigasi on
>> >>> >> > the
>> >>> >> > same
>> >>> >> > machine.
>> >>> >> > I am able to do web meeting very well. I tried to send a SIP
>> >>> >> > INVITE
>> >>> >> > to
>> >>> >> > myhost:5060 with header "Jitsi-Conference-Room: room1234" to
>> >>> >> > establish a
>> >>> >> > meeting through SIP but the myhost:5060 never responds. Do I
>> >>> >> > need
>> >>> >> > to
>> >>> >> > install
>> >>> >> > additional component for jigasi to work as a SIP endpoint ?
>> >>> >> >
>> >>> >> > Thanks !
>> >>> >> > Kai
>> >>> >> >
>> >>> >> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov >>> >> >>> >> > <damencho@jitsi.org> >>> >> >>> >> > wrote:
>> >>> >> >>
>> >>> >> >> Hi,
>> >>> >> >>
>> >>> >> >> You can use jigasi for sip connectivity.
>> >>> >> >> https://github.com/jitsi/jigasi
>> >>> >> >> There is nothing to configure in videobridge as jigasi is as
>> >>> >> >> a
>> >>> >> >> client
>> >>> >> >> to videobridge, everything is handled by jicofo and
>> >>> >> >> jitsi-meet.
>> >>> >> >>
>> >>> >> >> Regards
>> >>> >> >> damencho
>> >>> >> >>
>> >>> >> >>
>> >>> >> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K <kai328us@gmail.com> >>> >> >>> >> >> wrote:
>> >>> >> >> > Hi, I would like to configure jitsi videobridge to work
>> >>> >> >> > with
>> >>> >> >> > freeswitch
>> >>> >> >> > or
>> >>> >> >> > asterisk so that people calling freeswitch or asterisk can
>> >>> >> >> > join a
>> >>> >> >> > video
>> >>> >> >> > conference handled by jitsi videobridge. Would you please
>> >>> >> >> > help
>> >>> >> >> > to
>> >>> >> >> > provide an
>> >>> >> >> > instruction on how to configure both jitsi videobridge and
>> >>> >> >> > freeswitch
>> >>> >> >> > or
>> >>> >> >> > asterisk for this purpose ?
>> >>> >> >> >
>> >>> >> >> > Thanks a lot,
>> >>> >> >> > Kai
>> >>> >> >> >
>> >>> >> >> > _______________________________________________
>> >>> >> >> > dev mailing list
>> >>> >> >> > dev@jitsi.org
>> >>> >> >> > Unsubscribe instructions and other list options:
>> >>> >> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>
>> >>> >> >> _______________________________________________
>> >>> >> >> dev mailing list
>> >>> >> >> dev@jitsi.org
>> >>> >> >> Unsubscribe instructions and other list options:
>> >>> >> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > _______________________________________________
>> >>> >> > dev mailing list
>> >>> >> > dev@jitsi.org
>> >>> >> > Unsubscribe instructions and other list options:
>> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >>
>> >>> >> _______________________________________________
>> >>> >> dev mailing list
>> >>> >> dev@jitsi.org
>> >>> >> Unsubscribe instructions and other list options:
>> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >
>> >>> >
>> >>> >
>> >>> > _______________________________________________
>> >>> > dev mailing list
>> >>> > dev@jitsi.org
>> >>> > Unsubscribe instructions and other list options:
>> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>>
>> >>> _______________________________________________
>> >>> dev mailing list
>> >>> dev@jitsi.org
>> >>> Unsubscribe instructions and other list options:
>> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#16

when I connect to default room 'siptest' in a browser, I started a sip
session to jigasi and can see the jigasi briefly connected to the
conference bridge but disappears quickly. The log says :

2016-09-23 18:10:35.966 SEVERE: [118] net.sf.fmj.media.Log.error() Failed
to prefetch: net.sf.fmj.media.ProcessEngine@2ee8f20e
2016-09-23 18:10:35.970 SEVERE: [117] net.sf.fmj.media.Log.error() Error:
Unable to prefetch net.sf.fmj.media.ProcessEngine@2ee8f20e

2016-09-23 18:10:36.154 INFO: [80]
org.jitsi.jigasi.JvbConference.onJvbCallStarted().663 JVB conference call
IN_PROGRESS siptest
2016-09-23 18:10:36.155 INFO: [80]
org.jitsi.jigasi.JvbConference.peerStateChanged().819
157583ddf65@callcontrol.10.xx.xx.xx JVB peer state:
net.java.sip.communicator.service.protocol.CallPeerState:Connected
2016-09-23 18:10:36.155 INFO: [80]
org.jitsi.jigasi.JvbConference.advertisePeerSSRCs().216 Peer
net.java.sip.communicator.service.protocol.CallPeerState:Connected SSRCs
audio: 2464704801 video: null
2016-09-23 18:10:36.174 INFO: [129]
impl.netaddr.NetworkAddressManagerServiceImpl.createDatagramSocket().549
Retrying a bind because of a failure to bind to address /10.xx.xx.xx and
port 10002
2016-09-23 18:10:36.314 INFO: [129]
service.protocol.media.MediaHandler.registerDynamicPTsWithStream().1002
Dynamic PT map: 98=rtpmap:-1 iLBC/8000 fmtp:mode=20; 101=rtpmap:-1
telephone-event/8000; 110=rtpmap:-1 speex/8000;
2016-09-23 18:10:36.314 INFO: [129]
service.protocol.media.MediaHandler.registerDynamicPTsWithStream().1019 PT
overrides []
2016-09-23 18:10:36.317 INFO: [129]
org.jitsi.jigasi.GatewaySession.peerStateChanged().692
157583ddf65@callcontrol.10.xx.xx.xx SIP peer state: Connecting*
2016-09-23 18:10:36.319 INFO: [144]
impl.protocol.sip.SipLogger.logInfo().196 Info from the JAIN-SIP stack:
Setting SIPMessage peerPacketSource to: /54.xx.xx.xx:5060
2016-09-23 18:10:36.321 INFO: [144]
org.jitsi.jigasi.GatewaySession.handleCallState().620 Sip call IN_PROGRESS:
Call: id=14746542323671460919724 peers=1
2016-09-23 18:10:36.321 INFO: [144]
org.jitsi.jigasi.GatewaySession.handleCallState().628 SIP call format used:
rtpmap:8 PCMA/8000
2016-09-23 18:10:36.322 INFO: [144]
org.jitsi.jigasi.GatewaySession.peerStateChanged().692
157583ddf65@callcontrol.10.xx.xx.xx SIP peer state: Connected
2016-09-23 18:10:36.322 INFO: [144]
service.protocol.media.CallPeerMediaHandler.start().1932 Starting
2016-09-23 18:10:36.344 INFO: [145]
impl.protocol.sip.SipLogger.logInfo().196 Info from the JAIN-SIP stack:
Setting SIPMessage peerPacketSource to: /54.xx.xx.xx:5060

My jitsi solution installed on AWS host.

Thanks,
Kai

···

On Fri, Sep 23, 2016 at 1:49 PM, Damian Minkov <damencho@jitsi.org> wrote:

Nope. The first part is if you are using xmpp authentication on the server.
Not sure about the last one, if you see some certificate errors in
your logs you should enable it. You can try enabling that property, it
will just avoid any kind of certificate validation.

On Fri, Sep 23, 2016 at 12:44 PM, Kai K <kai328us@gmail.com> wrote:
> I notice my jigasi conf has a section of default values.
>
> # If you want jigasi to perform authenticated login instead of anonymous
> login
> # to the XMPP server, you can set the following properties.
> # org.jitsi.jigasi.xmpp.acc.USER_ID=SOME_USER@SOME_DOMAIN
> # org.jitsi.jigasi.xmpp.acc.PASS=SOME_PASS
> # org.jitsi.jigasi.xmpp.acc.ANONYMOUS_AUTH=false
>
> # If you want to use the SIP user part of the incoming/outgoing call SIP
URI
> # you can set the following property to true.
> # org.jitsi.jigasi.USE_SIP_USER_AS_XMPP_RESOURCE=true
>
> # Activate this property if you are using self-signed certificates or
other
> # type of non-trusted certicates. In this mode your service trust in the
> # remote certificates always.
> # net.java.sip.communicator.service.gui.ALWAYS_TRUST_MODE_ENABLED=true
>
> Should I change it and how ?
>
> Thanks,
> Kai
>
> On Fri, Sep 23, 2016 at 1:41 PM, Kai K <kai328us@gmail.com> wrote:
>>
>> Looks like the log complains :
>>
>> 2016-09-23 17:36:35.040 INFO: [52]
>> org.jitsi.jigasi.JvbConference.registrationStateChanged().544 XMPP
>> (157581ec3bd@callcontrol.10.71.18.104): RegistrationStateChangeEvent[
>> oldState=Unregistered; newState=RegistrationState=Registering;
>> reasonCode=-1; reason=null]
>> 2016-09-23 17:36:35.052 SEVERE: [52]
>> service.protocol.AbstractProtocolProviderService.
fireRegistrationStateChanged().201
>> An error occurred while executing
>> RegistrationStateChangeListener#registrationStateChanged(
RegistrationStateChangeEvent)
>> of
>> net.java.sip.communicator.impl.protocol.jabber.
OperationSetPersistentPresenceJabberImpl$RegistrationStateListener@
6b57a931
>> java.lang.IllegalArgumentException: Connection cannot be anonymous
>> at
>> org.jivesoftware.smackx.packet.VCard.checkAuthenticated(VCard.java:571)
>> at org.jivesoftware.smackx.packet.VCard.load(VCard.java:511)
>> at
>> net.java.sip.communicator.impl.protocol.jabber.
OperationSetPersistentPresenceJabberImpl.createAccountPhotoPresenceInte
rceptor(OperationSetPersistentPresenceJabberImpl.java:1898)
>> at
>> net.java.sip.communicator.impl.protocol.jabber.
OperationSetPersistentPresenceJabberImpl$RegistrationStateListener.
registrationStateChanged(OperationSetPersistentPresence
JabberImpl.java:1106)
>> at
>> net.java.sip.communicator.service.protocol.
AbstractProtocolProviderService.fireRegistrationStateChanged(
AbstractProtocolProviderService.java:187)
>> at
>> net.java.sip.communicator.service.protocol.
AbstractProtocolProviderService.fireRegistrationStateChanged(
AbstractProtocolProviderService.java:141)
>> at
>> net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.connectAndLogin(
ProtocolProviderServiceJabberImpl.java:1314)
>> at
>> net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.connectAndLogin(
ProtocolProviderServiceJabberImpl.java:944)
>> at
>> net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.initializeConnectAndLogin(
ProtocolProviderServiceJabberImpl.java:755)
>> at
>> net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.register(ProtocolProviderServiceJabberI
mpl.java:468)
>> at org.jitsi.jigasi.RegisterThread.run(RegisterThread.java:58)
>> 2016-09-23 17:36:35.064 WARNING: [58]
>> impl.protocol.jabber.OperationSetBasicInstantMessagingJabberImpl.
isCarbonSupported().775
>> Failed to retrieve carbon support.not-allowed(-1) Communication with
remote
>> domains is not enabled
>> 2016-09-23 17:36:35.072 SEVERE: [60]
>> impl.protocol.jabber.InfoRetreiver.retrieveDetails().361 Cannot load
details
>> for contact 157581ec3bd@10.71.18.104 : item-not-found(-1
>>
>> Regards,
>> Kai
>>
>> On Fri, Sep 23, 2016 at 12:05 PM, Damian Minkov <damencho@jitsi.org> > >> wrote:
>>>
>>> What does jigasi logs say?
>>>
>>> On Fri, Sep 23, 2016 at 10:42 AM, Kai K <kai328us@gmail.com> wrote:
>>> > Hi Damencho,
>>> >
>>> > I have set up the freeswitch account ready and I can see jigasi
>>> > registers to
>>> > freeswitch, receives the INVITE and replies 180. But it never proceed
>>> > to 200
>>> > OK until timeout. Would you please let me know how I can debug this
>>> > problem
>>> > ?
>>> >
>>> > Thanks !
>>> > Kai
>>> >
>>> > On Thu, Sep 22, 2016 at 2:17 PM, Damian Minkov <damencho@jitsi.org> > >>> > wrote:
>>> >>
>>> >> Hi,
>>> >>
>>> >> So jigasi is using jitsi's protocol and account management
>>> >> implementation. The easiest way it to install jitsi desktop client,
>>> >> configure its sip account to work with freeswitch and then use its
>>> >> configuration for jigasi sip account, you already saw the account
>>> >> properties that are about the sip account, you can find similar and
in
>>> >> jitsi desktop client config.
>>> >>
>>> >> Regards
>>> >> damencho
>>> >>
>>> >>
>>> >> On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> wrote:
>>> >> > I installed freeswitch and try to use the existing user account
1000
>>> >> > for
>>> >> > jigasi. But calling to this account goes to voicemail. I suppose
the
>>> >> > jigasi
>>> >> > is not registering. How can I debug this problem ? I found my
>>> >> > sip-communicator.properties file for jigasi does not have any sip
>>> >> > server
>>> >> > address specified by default apt-get installation.
>>> >> >
>>> >> > Thanks and regards,
>>> >> > Kai
>>> >> >
>>> >> > On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> > wrote:
>>> >> >>
>>> >> >> Okay thanks !
>>> >> >>
>>> >> >> On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov < > damencho@jitsi.org> > >>> >> >> wrote:
>>> >> >>>
>>> >> >>> You just need username and password. And when you install jigasi
>>> >> >>> it
>>> >> >>> asks for that info. I think it will work with
>>> >> >>> username@ip-address-freeswitch-is-listening-to and the
password.
>>> >> >>>
>>> >> >>> On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> > wrote:
>>> >> >>> > I see. So I need to install freeswitch and connect jigasi with
>>> >> >>> > it.
>>> >> >>> > Do
>>> >> >>> > you
>>> >> >>> > have an instruction on how to connect jigasi with a freeswitch
>>> >> >>> > installed on
>>> >> >>> > the same host ?
>>> >> >>> >
>>> >> >>> > Thanks,
>>> >> >>> > Kai
>>> >> >>> >
>>> >> >>> > On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov > >>> >> >>> > <damencho@jitsi.org> > >>> >> >>> > wrote:
>>> >> >>> >>
>>> >> >>> >> Jigasi is just a sip client that registers to your sip
service.
>>> >> >>> >> You
>>> >> >>> >> need to check its logs whether it is registered and whether
it
>>> >> >>> >> is
>>> >> >>> >> receiving your invite. The invite should come from your
>>> >> >>> >> service,
>>> >> >>> >> you
>>> >> >>> >> cannot do it p2p if that is what you tested. I have been
>>> >> >>> >> testing
>>> >> >>> >> jigasi with asterisk with no problem.
>>> >> >>> >>
>>> >> >>> >> On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> > >>> >> >>> >> wrote:
>>> >> >>> >> > Hi damencho,
>>> >> >>> >> >
>>> >> >>> >> > Thanks for the advice. I have setup jit-meet and jigasi on
>>> >> >>> >> > the
>>> >> >>> >> > same
>>> >> >>> >> > machine.
>>> >> >>> >> > I am able to do web meeting very well. I tried to send a
SIP
>>> >> >>> >> > INVITE
>>> >> >>> >> > to
>>> >> >>> >> > myhost:5060 with header "Jitsi-Conference-Room: room1234"
to
>>> >> >>> >> > establish a
>>> >> >>> >> > meeting through SIP but the myhost:5060 never responds. Do
I
>>> >> >>> >> > need
>>> >> >>> >> > to
>>> >> >>> >> > install
>>> >> >>> >> > additional component for jigasi to work as a SIP endpoint ?
>>> >> >>> >> >
>>> >> >>> >> > Thanks !
>>> >> >>> >> > Kai
>>> >> >>> >> >
>>> >> >>> >> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov > >>> >> >>> >> > <damencho@jitsi.org> > >>> >> >>> >> > wrote:
>>> >> >>> >> >>
>>> >> >>> >> >> Hi,
>>> >> >>> >> >>
>>> >> >>> >> >> You can use jigasi for sip connectivity.
>>> >> >>> >> >> https://github.com/jitsi/jigasi
>>> >> >>> >> >> There is nothing to configure in videobridge as jigasi is
as
>>> >> >>> >> >> a
>>> >> >>> >> >> client
>>> >> >>> >> >> to videobridge, everything is handled by jicofo and
>>> >> >>> >> >> jitsi-meet.
>>> >> >>> >> >>
>>> >> >>> >> >> Regards
>>> >> >>> >> >> damencho
>>> >> >>> >> >>
>>> >> >>> >> >>
>>> >> >>> >> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K < > kai328us@gmail.com> > >>> >> >>> >> >> wrote:
>>> >> >>> >> >> > Hi, I would like to configure jitsi videobridge to work
>>> >> >>> >> >> > with
>>> >> >>> >> >> > freeswitch
>>> >> >>> >> >> > or
>>> >> >>> >> >> > asterisk so that people calling freeswitch or asterisk
can
>>> >> >>> >> >> > join a
>>> >> >>> >> >> > video
>>> >> >>> >> >> > conference handled by jitsi videobridge. Would you
please
>>> >> >>> >> >> > help
>>> >> >>> >> >> > to
>>> >> >>> >> >> > provide an
>>> >> >>> >> >> > instruction on how to configure both jitsi videobridge
and
>>> >> >>> >> >> > freeswitch
>>> >> >>> >> >> > or
>>> >> >>> >> >> > asterisk for this purpose ?
>>> >> >>> >> >> >
>>> >> >>> >> >> > Thanks a lot,
>>> >> >>> >> >> > Kai
>>> >> >>> >> >> >
>>> >> >>> >> >> > _______________________________________________
>>> >> >>> >> >> > dev mailing list
>>> >> >>> >> >> > dev@jitsi.org
>>> >> >>> >> >> > Unsubscribe instructions and other list options:
>>> >> >>> >> >> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>> >> >>
>>> >> >>> >> >> _______________________________________________
>>> >> >>> >> >> dev mailing list
>>> >> >>> >> >> dev@jitsi.org
>>> >> >>> >> >> Unsubscribe instructions and other list options:
>>> >> >>> >> >> http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>> >> >
>>> >> >>> >> >
>>> >> >>> >> >
>>> >> >>> >> > _______________________________________________
>>> >> >>> >> > dev mailing list
>>> >> >>> >> > dev@jitsi.org
>>> >> >>> >> > Unsubscribe instructions and other list options:
>>> >> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>> >>
>>> >> >>> >> _______________________________________________
>>> >> >>> >> dev mailing list
>>> >> >>> >> dev@jitsi.org
>>> >> >>> >> Unsubscribe instructions and other list options:
>>> >> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>> >
>>> >> >>> >
>>> >> >>> >
>>> >> >>> > _______________________________________________
>>> >> >>> > dev mailing list
>>> >> >>> > dev@jitsi.org
>>> >> >>> > Unsubscribe instructions and other list options:
>>> >> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>>
>>> >> >>> _______________________________________________
>>> >> >>> dev mailing list
>>> >> >>> dev@jitsi.org
>>> >> >>> Unsubscribe instructions and other list options:
>>> >> >>> http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>
>>> >> >>
>>> >> >
>>> >> >
>>> >> > _______________________________________________
>>> >> > dev mailing list
>>> >> > dev@jitsi.org
>>> >> > Unsubscribe instructions and other list options:
>>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >>
>>> >> _______________________________________________
>>> >> dev mailing list
>>> >> dev@jitsi.org
>>> >> Unsubscribe instructions and other list options:
>>> >> http://lists.jitsi.org/mailman/listinfo/dev
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > dev mailing list
>>> > dev@jitsi.org
>>> > Unsubscribe instructions and other list options:
>>> > http://lists.jitsi.org/mailman/listinfo/dev
>>>
>>> _______________________________________________
>>> dev mailing list
>>> dev@jitsi.org
>>> Unsubscribe instructions and other list options:
>>> http://lists.jitsi.org/mailman/listinfo/dev
>>
>>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#17

I do not see anything suspicious in these logs. And there is nothing more? Hum.

···

On Fri, Sep 23, 2016 at 1:24 PM, Kai K <kai328us@gmail.com> wrote:

when I connect to default room 'siptest' in a browser, I started a sip
session to jigasi and can see the jigasi briefly connected to the conference
bridge but disappears quickly. The log says :

2016-09-23 18:10:35.966 SEVERE: [118] net.sf.fmj.media.Log.error() Failed to
prefetch: net.sf.fmj.media.ProcessEngine@2ee8f20e
2016-09-23 18:10:35.970 SEVERE: [117] net.sf.fmj.media.Log.error() Error:
Unable to prefetch net.sf.fmj.media.ProcessEngine@2ee8f20e

2016-09-23 18:10:36.154 INFO: [80]
org.jitsi.jigasi.JvbConference.onJvbCallStarted().663 JVB conference call
IN_PROGRESS siptest
2016-09-23 18:10:36.155 INFO: [80]
org.jitsi.jigasi.JvbConference.peerStateChanged().819
157583ddf65@callcontrol.10.xx.xx.xx JVB peer state:
net.java.sip.communicator.service.protocol.CallPeerState:Connected
2016-09-23 18:10:36.155 INFO: [80]
org.jitsi.jigasi.JvbConference.advertisePeerSSRCs().216 Peer
net.java.sip.communicator.service.protocol.CallPeerState:Connected SSRCs
audio: 2464704801 video: null
2016-09-23 18:10:36.174 INFO: [129]
impl.netaddr.NetworkAddressManagerServiceImpl.createDatagramSocket().549
Retrying a bind because of a failure to bind to address /10.xx.xx.xx and
port 10002
2016-09-23 18:10:36.314 INFO: [129]
service.protocol.media.MediaHandler.registerDynamicPTsWithStream().1002
Dynamic PT map: 98=rtpmap:-1 iLBC/8000 fmtp:mode=20; 101=rtpmap:-1
telephone-event/8000; 110=rtpmap:-1 speex/8000;
2016-09-23 18:10:36.314 INFO: [129]
service.protocol.media.MediaHandler.registerDynamicPTsWithStream().1019 PT
overrides []
2016-09-23 18:10:36.317 INFO: [129]
org.jitsi.jigasi.GatewaySession.peerStateChanged().692
157583ddf65@callcontrol.10.xx.xx.xx SIP peer state: Connecting*
2016-09-23 18:10:36.319 INFO: [144]
impl.protocol.sip.SipLogger.logInfo().196 Info from the JAIN-SIP stack:
Setting SIPMessage peerPacketSource to: /54.xx.xx.xx:5060
2016-09-23 18:10:36.321 INFO: [144]
org.jitsi.jigasi.GatewaySession.handleCallState().620 Sip call IN_PROGRESS:
Call: id=14746542323671460919724 peers=1
2016-09-23 18:10:36.321 INFO: [144]
org.jitsi.jigasi.GatewaySession.handleCallState().628 SIP call format used:
rtpmap:8 PCMA/8000
2016-09-23 18:10:36.322 INFO: [144]
org.jitsi.jigasi.GatewaySession.peerStateChanged().692
157583ddf65@callcontrol.10.xx.xx.xx SIP peer state: Connected
2016-09-23 18:10:36.322 INFO: [144]
service.protocol.media.CallPeerMediaHandler.start().1932 Starting
2016-09-23 18:10:36.344 INFO: [145]
impl.protocol.sip.SipLogger.logInfo().196 Info from the JAIN-SIP stack:
Setting SIPMessage peerPacketSource to: /54.xx.xx.xx:5060

My jitsi solution installed on AWS host.

Thanks,
Kai

On Fri, Sep 23, 2016 at 1:49 PM, Damian Minkov <damencho@jitsi.org> wrote:

Nope. The first part is if you are using xmpp authentication on the
server.
Not sure about the last one, if you see some certificate errors in
your logs you should enable it. You can try enabling that property, it
will just avoid any kind of certificate validation.

On Fri, Sep 23, 2016 at 12:44 PM, Kai K <kai328us@gmail.com> wrote:
> I notice my jigasi conf has a section of default values.
>
> # If you want jigasi to perform authenticated login instead of anonymous
> login
> # to the XMPP server, you can set the following properties.
> # org.jitsi.jigasi.xmpp.acc.USER_ID=SOME_USER@SOME_DOMAIN
> # org.jitsi.jigasi.xmpp.acc.PASS=SOME_PASS
> # org.jitsi.jigasi.xmpp.acc.ANONYMOUS_AUTH=false
>
> # If you want to use the SIP user part of the incoming/outgoing call SIP
> URI
> # you can set the following property to true.
> # org.jitsi.jigasi.USE_SIP_USER_AS_XMPP_RESOURCE=true
>
> # Activate this property if you are using self-signed certificates or
> other
> # type of non-trusted certicates. In this mode your service trust in the
> # remote certificates always.
> # net.java.sip.communicator.service.gui.ALWAYS_TRUST_MODE_ENABLED=true
>
> Should I change it and how ?
>
> Thanks,
> Kai
>
> On Fri, Sep 23, 2016 at 1:41 PM, Kai K <kai328us@gmail.com> wrote:
>>
>> Looks like the log complains :
>>
>> 2016-09-23 17:36:35.040 INFO: [52]
>> org.jitsi.jigasi.JvbConference.registrationStateChanged().544 XMPP
>> (157581ec3bd@callcontrol.10.71.18.104): RegistrationStateChangeEvent[
>> oldState=Unregistered; newState=RegistrationState=Registering;
>> reasonCode=-1; reason=null]
>> 2016-09-23 17:36:35.052 SEVERE: [52]
>>
>> service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged().201
>> An error occurred while executing
>>
>> RegistrationStateChangeListener#registrationStateChanged(RegistrationStateChangeEvent)
>> of
>>
>> net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl$RegistrationStateListener@6b57a931
>> java.lang.IllegalArgumentException: Connection cannot be anonymous
>> at
>> org.jivesoftware.smackx.packet.VCard.checkAuthenticated(VCard.java:571)
>> at org.jivesoftware.smackx.packet.VCard.load(VCard.java:511)
>> at
>>
>> net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl.createAccountPhotoPresenceInterceptor(OperationSetPersistentPresenceJabberImpl.java:1898)
>> at
>>
>> net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl$RegistrationStateListener.registrationStateChanged(OperationSetPersistentPresenceJabberImpl.java:1106)
>> at
>>
>> net.java.sip.communicator.service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged(AbstractProtocolProviderService.java:187)
>> at
>>
>> net.java.sip.communicator.service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged(AbstractProtocolProviderService.java:141)
>> at
>>
>> net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.connectAndLogin(ProtocolProviderServiceJabberImpl.java:1314)
>> at
>>
>> net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.connectAndLogin(ProtocolProviderServiceJabberImpl.java:944)
>> at
>>
>> net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.initializeConnectAndLogin(ProtocolProviderServiceJabberImpl.java:755)
>> at
>>
>> net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.register(ProtocolProviderServiceJabberImpl.java:468)
>> at org.jitsi.jigasi.RegisterThread.run(RegisterThread.java:58)
>> 2016-09-23 17:36:35.064 WARNING: [58]
>>
>> impl.protocol.jabber.OperationSetBasicInstantMessagingJabberImpl.isCarbonSupported().775
>> Failed to retrieve carbon support.not-allowed(-1) Communication with
>> remote
>> domains is not enabled
>> 2016-09-23 17:36:35.072 SEVERE: [60]
>> impl.protocol.jabber.InfoRetreiver.retrieveDetails().361 Cannot load
>> details
>> for contact 157581ec3bd@10.71.18.104 : item-not-found(-1
>>
>> Regards,
>> Kai
>>
>> On Fri, Sep 23, 2016 at 12:05 PM, Damian Minkov <damencho@jitsi.org> >> >> wrote:
>>>
>>> What does jigasi logs say?
>>>
>>> On Fri, Sep 23, 2016 at 10:42 AM, Kai K <kai328us@gmail.com> wrote:
>>> > Hi Damencho,
>>> >
>>> > I have set up the freeswitch account ready and I can see jigasi
>>> > registers to
>>> > freeswitch, receives the INVITE and replies 180. But it never
>>> > proceed
>>> > to 200
>>> > OK until timeout. Would you please let me know how I can debug this
>>> > problem
>>> > ?
>>> >
>>> > Thanks !
>>> > Kai
>>> >
>>> > On Thu, Sep 22, 2016 at 2:17 PM, Damian Minkov <damencho@jitsi.org> >> >>> > wrote:
>>> >>
>>> >> Hi,
>>> >>
>>> >> So jigasi is using jitsi's protocol and account management
>>> >> implementation. The easiest way it to install jitsi desktop client,
>>> >> configure its sip account to work with freeswitch and then use its
>>> >> configuration for jigasi sip account, you already saw the account
>>> >> properties that are about the sip account, you can find similar and
>>> >> in
>>> >> jitsi desktop client config.
>>> >>
>>> >> Regards
>>> >> damencho
>>> >>
>>> >>
>>> >> On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> wrote:
>>> >> > I installed freeswitch and try to use the existing user account
>>> >> > 1000
>>> >> > for
>>> >> > jigasi. But calling to this account goes to voicemail. I suppose
>>> >> > the
>>> >> > jigasi
>>> >> > is not registering. How can I debug this problem ? I found my
>>> >> > sip-communicator.properties file for jigasi does not have any sip
>>> >> > server
>>> >> > address specified by default apt-get installation.
>>> >> >
>>> >> > Thanks and regards,
>>> >> > Kai
>>> >> >
>>> >> > On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> >> >>> >> > wrote:
>>> >> >>
>>> >> >> Okay thanks !
>>> >> >>
>>> >> >> On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov >> >>> >> >> <damencho@jitsi.org> >> >>> >> >> wrote:
>>> >> >>>
>>> >> >>> You just need username and password. And when you install
>>> >> >>> jigasi
>>> >> >>> it
>>> >> >>> asks for that info. I think it will work with
>>> >> >>> username@ip-address-freeswitch-is-listening-to and the
>>> >> >>> password.
>>> >> >>>
>>> >> >>> On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> >> >>> >> >>> wrote:
>>> >> >>> > I see. So I need to install freeswitch and connect jigasi
>>> >> >>> > with
>>> >> >>> > it.
>>> >> >>> > Do
>>> >> >>> > you
>>> >> >>> > have an instruction on how to connect jigasi with a
>>> >> >>> > freeswitch
>>> >> >>> > installed on
>>> >> >>> > the same host ?
>>> >> >>> >
>>> >> >>> > Thanks,
>>> >> >>> > Kai
>>> >> >>> >
>>> >> >>> > On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov >> >>> >> >>> > <damencho@jitsi.org> >> >>> >> >>> > wrote:
>>> >> >>> >>
>>> >> >>> >> Jigasi is just a sip client that registers to your sip
>>> >> >>> >> service.
>>> >> >>> >> You
>>> >> >>> >> need to check its logs whether it is registered and whether
>>> >> >>> >> it
>>> >> >>> >> is
>>> >> >>> >> receiving your invite. The invite should come from your
>>> >> >>> >> service,
>>> >> >>> >> you
>>> >> >>> >> cannot do it p2p if that is what you tested. I have been
>>> >> >>> >> testing
>>> >> >>> >> jigasi with asterisk with no problem.
>>> >> >>> >>
>>> >> >>> >> On Wed, Sep 21, 2016 at 1:52 PM, Kai K <kai328us@gmail.com> >> >>> >> >>> >> wrote:
>>> >> >>> >> > Hi damencho,
>>> >> >>> >> >
>>> >> >>> >> > Thanks for the advice. I have setup jit-meet and jigasi on
>>> >> >>> >> > the
>>> >> >>> >> > same
>>> >> >>> >> > machine.
>>> >> >>> >> > I am able to do web meeting very well. I tried to send a
>>> >> >>> >> > SIP
>>> >> >>> >> > INVITE
>>> >> >>> >> > to
>>> >> >>> >> > myhost:5060 with header "Jitsi-Conference-Room: room1234"
>>> >> >>> >> > to
>>> >> >>> >> > establish a
>>> >> >>> >> > meeting through SIP but the myhost:5060 never responds. Do
>>> >> >>> >> > I
>>> >> >>> >> > need
>>> >> >>> >> > to
>>> >> >>> >> > install
>>> >> >>> >> > additional component for jigasi to work as a SIP endpoint
>>> >> >>> >> > ?
>>> >> >>> >> >
>>> >> >>> >> > Thanks !
>>> >> >>> >> > Kai
>>> >> >>> >> >
>>> >> >>> >> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov >> >>> >> >>> >> > <damencho@jitsi.org> >> >>> >> >>> >> > wrote:
>>> >> >>> >> >>
>>> >> >>> >> >> Hi,
>>> >> >>> >> >>
>>> >> >>> >> >> You can use jigasi for sip connectivity.
>>> >> >>> >> >> https://github.com/jitsi/jigasi
>>> >> >>> >> >> There is nothing to configure in videobridge as jigasi is
>>> >> >>> >> >> as
>>> >> >>> >> >> a
>>> >> >>> >> >> client
>>> >> >>> >> >> to videobridge, everything is handled by jicofo and
>>> >> >>> >> >> jitsi-meet.
>>> >> >>> >> >>
>>> >> >>> >> >> Regards
>>> >> >>> >> >> damencho
>>> >> >>> >> >>
>>> >> >>> >> >>
>>> >> >>> >> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K >> >>> >> >>> >> >> <kai328us@gmail.com> >> >>> >> >>> >> >> wrote:
>>> >> >>> >> >> > Hi, I would like to configure jitsi videobridge to work
>>> >> >>> >> >> > with
>>> >> >>> >> >> > freeswitch
>>> >> >>> >> >> > or
>>> >> >>> >> >> > asterisk so that people calling freeswitch or asterisk
>>> >> >>> >> >> > can
>>> >> >>> >> >> > join a
>>> >> >>> >> >> > video
>>> >> >>> >> >> > conference handled by jitsi videobridge. Would you
>>> >> >>> >> >> > please
>>> >> >>> >> >> > help
>>> >> >>> >> >> > to
>>> >> >>> >> >> > provide an
>>> >> >>> >> >> > instruction on how to configure both jitsi videobridge
>>> >> >>> >> >> > and
>>> >> >>> >> >> > freeswitch
>>> >> >>> >> >> > or
>>> >> >>> >> >> > asterisk for this purpose ?
>>> >> >>> >> >> >
>>> >> >>> >> >> > Thanks a lot,
>>> >> >>> >> >> > Kai
>>> >> >>> >> >> >
>>> >> >>> >> >> > _______________________________________________
>>> >> >>> >> >> > dev mailing list
>>> >> >>> >> >> > dev@jitsi.org
>>> >> >>> >> >> > Unsubscribe instructions and other list options:
>>> >> >>> >> >> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>> >> >>
>>> >> >>> >> >> _______________________________________________
>>> >> >>> >> >> dev mailing list
>>> >> >>> >> >> dev@jitsi.org
>>> >> >>> >> >> Unsubscribe instructions and other list options:
>>> >> >>> >> >> http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>> >> >
>>> >> >>> >> >
>>> >> >>> >> >
>>> >> >>> >> > _______________________________________________
>>> >> >>> >> > dev mailing list
>>> >> >>> >> > dev@jitsi.org
>>> >> >>> >> > Unsubscribe instructions and other list options:
>>> >> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>> >>
>>> >> >>> >> _______________________________________________
>>> >> >>> >> dev mailing list
>>> >> >>> >> dev@jitsi.org
>>> >> >>> >> Unsubscribe instructions and other list options:
>>> >> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>> >
>>> >> >>> >
>>> >> >>> >
>>> >> >>> > _______________________________________________
>>> >> >>> > dev mailing list
>>> >> >>> > dev@jitsi.org
>>> >> >>> > Unsubscribe instructions and other list options:
>>> >> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>>
>>> >> >>> _______________________________________________
>>> >> >>> dev mailing list
>>> >> >>> dev@jitsi.org
>>> >> >>> Unsubscribe instructions and other list options:
>>> >> >>> http://lists.jitsi.org/mailman/listinfo/dev
>>> >> >>
>>> >> >>
>>> >> >
>>> >> >
>>> >> > _______________________________________________
>>> >> > dev mailing list
>>> >> > dev@jitsi.org
>>> >> > Unsubscribe instructions and other list options:
>>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>>> >>
>>> >> _______________________________________________
>>> >> dev mailing list
>>> >> dev@jitsi.org
>>> >> Unsubscribe instructions and other list options:
>>> >> http://lists.jitsi.org/mailman/listinfo/dev
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > dev mailing list
>>> > dev@jitsi.org
>>> > Unsubscribe instructions and other list options:
>>> > http://lists.jitsi.org/mailman/listinfo/dev
>>>
>>> _______________________________________________
>>> dev mailing list
>>> dev@jitsi.org
>>> Unsubscribe instructions and other list options:
>>> http://lists.jitsi.org/mailman/listinfo/dev
>>
>>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#18

No more. Free sip point of view, upon receiving INVITE from freeswitch,
jitagi only sends back 180, but never send back 200.

Thanks,
Kai

···

On Fri, Sep 23, 2016 at 2:30 PM, Damian Minkov <damencho@jitsi.org> wrote:

I do not see anything suspicious in these logs. And there is nothing more?
Hum.

On Fri, Sep 23, 2016 at 1:24 PM, Kai K <kai328us@gmail.com> wrote:
> when I connect to default room 'siptest' in a browser, I started a sip
> session to jigasi and can see the jigasi briefly connected to the
conference
> bridge but disappears quickly. The log says :
>
> 2016-09-23 18:10:35.966 SEVERE: [118] net.sf.fmj.media.Log.error()
Failed to
> prefetch: net.sf.fmj.media.ProcessEngine@2ee8f20e
> 2016-09-23 18:10:35.970 SEVERE: [117] net.sf.fmj.media.Log.error() Error:
> Unable to prefetch net.sf.fmj.media.ProcessEngine@2ee8f20e
>
> 2016-09-23 18:10:36.154 INFO: [80]
> org.jitsi.jigasi.JvbConference.onJvbCallStarted().663 JVB conference
call
> IN_PROGRESS siptest
> 2016-09-23 18:10:36.155 INFO: [80]
> org.jitsi.jigasi.JvbConference.peerStateChanged().819
> 157583ddf65@callcontrol.10.xx.xx.xx JVB peer state:
> net.java.sip.communicator.service.protocol.CallPeerState:Connected
> 2016-09-23 18:10:36.155 INFO: [80]
> org.jitsi.jigasi.JvbConference.advertisePeerSSRCs().216 Peer
> net.java.sip.communicator.service.protocol.CallPeerState:Connected SSRCs
> audio: 2464704801 video: null
> 2016-09-23 18:10:36.174 INFO: [129]
> impl.netaddr.NetworkAddressManagerServiceImpl.createDatagramSocket().549
> Retrying a bind because of a failure to bind to address /10.xx.xx.xx and
> port 10002
> 2016-09-23 18:10:36.314 INFO: [129]
> service.protocol.media.MediaHandler.registerDynamicPTsWithStream().1002
> Dynamic PT map: 98=rtpmap:-1 iLBC/8000 fmtp:mode=20; 101=rtpmap:-1
> telephone-event/8000; 110=rtpmap:-1 speex/8000;
> 2016-09-23 18:10:36.314 INFO: [129]
> service.protocol.media.MediaHandler.registerDynamicPTsWithStream().1019
PT
> overrides []
> 2016-09-23 18:10:36.317 INFO: [129]
> org.jitsi.jigasi.GatewaySession.peerStateChanged().692
> 157583ddf65@callcontrol.10.xx.xx.xx SIP peer state: Connecting*
> 2016-09-23 18:10:36.319 INFO: [144]
> impl.protocol.sip.SipLogger.logInfo().196 Info from the JAIN-SIP stack:
> Setting SIPMessage peerPacketSource to: /54.xx.xx.xx:5060
> 2016-09-23 18:10:36.321 INFO: [144]
> org.jitsi.jigasi.GatewaySession.handleCallState().620 Sip call
IN_PROGRESS:
> Call: id=14746542323671460919724 peers=1
> 2016-09-23 18:10:36.321 INFO: [144]
> org.jitsi.jigasi.GatewaySession.handleCallState().628 SIP call format
used:
> rtpmap:8 PCMA/8000
> 2016-09-23 18:10:36.322 INFO: [144]
> org.jitsi.jigasi.GatewaySession.peerStateChanged().692
> 157583ddf65@callcontrol.10.xx.xx.xx SIP peer state: Connected
> 2016-09-23 18:10:36.322 INFO: [144]
> service.protocol.media.CallPeerMediaHandler.start().1932 Starting
> 2016-09-23 18:10:36.344 INFO: [145]
> impl.protocol.sip.SipLogger.logInfo().196 Info from the JAIN-SIP stack:
> Setting SIPMessage peerPacketSource to: /54.xx.xx.xx:5060
>
> My jitsi solution installed on AWS host.
>
> Thanks,
> Kai
>
> On Fri, Sep 23, 2016 at 1:49 PM, Damian Minkov <damencho@jitsi.org> > wrote:
>>
>> Nope. The first part is if you are using xmpp authentication on the
>> server.
>> Not sure about the last one, if you see some certificate errors in
>> your logs you should enable it. You can try enabling that property, it
>> will just avoid any kind of certificate validation.
>>
>> On Fri, Sep 23, 2016 at 12:44 PM, Kai K <kai328us@gmail.com> wrote:
>> > I notice my jigasi conf has a section of default values.
>> >
>> > # If you want jigasi to perform authenticated login instead of
anonymous
>> > login
>> > # to the XMPP server, you can set the following properties.
>> > # org.jitsi.jigasi.xmpp.acc.USER_ID=SOME_USER@SOME_DOMAIN
>> > # org.jitsi.jigasi.xmpp.acc.PASS=SOME_PASS
>> > # org.jitsi.jigasi.xmpp.acc.ANONYMOUS_AUTH=false
>> >
>> > # If you want to use the SIP user part of the incoming/outgoing call
SIP
>> > URI
>> > # you can set the following property to true.
>> > # org.jitsi.jigasi.USE_SIP_USER_AS_XMPP_RESOURCE=true
>> >
>> > # Activate this property if you are using self-signed certificates or
>> > other
>> > # type of non-trusted certicates. In this mode your service trust in
the
>> > # remote certificates always.
>> > # net.java.sip.communicator.service.gui.ALWAYS_TRUST_MODE_
ENABLED=true
>> >
>> > Should I change it and how ?
>> >
>> > Thanks,
>> > Kai
>> >
>> > On Fri, Sep 23, 2016 at 1:41 PM, Kai K <kai328us@gmail.com> wrote:
>> >>
>> >> Looks like the log complains :
>> >>
>> >> 2016-09-23 17:36:35.040 INFO: [52]
>> >> org.jitsi.jigasi.JvbConference.registrationStateChanged().544 XMPP
>> >> (157581ec3bd@callcontrol.10.71.18.104):
RegistrationStateChangeEvent[
>> >> oldState=Unregistered; newState=RegistrationState=Registering;
>> >> reasonCode=-1; reason=null]
>> >> 2016-09-23 17:36:35.052 SEVERE: [52]
>> >>
>> >> service.protocol.AbstractProtocolProviderService.
fireRegistrationStateChanged().201
>> >> An error occurred while executing
>> >>
>> >> RegistrationStateChangeListener#registrationStateChanged(
RegistrationStateChangeEvent)
>> >> of
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.
OperationSetPersistentPresenceJabberImpl$RegistrationStateListener@
6b57a931
>> >> java.lang.IllegalArgumentException: Connection cannot be anonymous
>> >> at
>> >> org.jivesoftware.smackx.packet.VCard.checkAuthenticated(VCard.java:
571)
>> >> at org.jivesoftware.smackx.packet.VCard.load(VCard.java:511)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.
OperationSetPersistentPresenceJabberImpl.createAccountPhotoPresenceInte
rceptor(OperationSetPersistentPresenceJabberImpl.java:1898)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.
OperationSetPersistentPresenceJabberImpl$RegistrationStateListener.
registrationStateChanged(OperationSetPersistentPresence
JabberImpl.java:1106)
>> >> at
>> >>
>> >> net.java.sip.communicator.service.protocol.
AbstractProtocolProviderService.fireRegistrationStateChanged(
AbstractProtocolProviderService.java:187)
>> >> at
>> >>
>> >> net.java.sip.communicator.service.protocol.
AbstractProtocolProviderService.fireRegistrationStateChanged(
AbstractProtocolProviderService.java:141)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.connectAndLogin(
ProtocolProviderServiceJabberImpl.java:1314)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.connectAndLogin(
ProtocolProviderServiceJabberImpl.java:944)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.initializeConnectAndLogin(
ProtocolProviderServiceJabberImpl.java:755)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.
ProtocolProviderServiceJabberImpl.register(ProtocolProviderServiceJabberI
mpl.java:468)
>> >> at org.jitsi.jigasi.RegisterThread.run(
RegisterThread.java:58)
>> >> 2016-09-23 17:36:35.064 WARNING: [58]
>> >>
>> >> impl.protocol.jabber.OperationSetBasicInstantMessagingJabberImpl.
isCarbonSupported().775
>> >> Failed to retrieve carbon support.not-allowed(-1) Communication with
>> >> remote
>> >> domains is not enabled
>> >> 2016-09-23 17:36:35.072 SEVERE: [60]
>> >> impl.protocol.jabber.InfoRetreiver.retrieveDetails().361 Cannot load
>> >> details
>> >> for contact 157581ec3bd@10.71.18.104 : item-not-found(-1
>> >>
>> >> Regards,
>> >> Kai
>> >>
>> >> On Fri, Sep 23, 2016 at 12:05 PM, Damian Minkov <damencho@jitsi.org> > >> >> wrote:
>> >>>
>> >>> What does jigasi logs say?
>> >>>
>> >>> On Fri, Sep 23, 2016 at 10:42 AM, Kai K <kai328us@gmail.com> wrote:
>> >>> > Hi Damencho,
>> >>> >
>> >>> > I have set up the freeswitch account ready and I can see jigasi
>> >>> > registers to
>> >>> > freeswitch, receives the INVITE and replies 180. But it never
>> >>> > proceed
>> >>> > to 200
>> >>> > OK until timeout. Would you please let me know how I can debug
this
>> >>> > problem
>> >>> > ?
>> >>> >
>> >>> > Thanks !
>> >>> > Kai
>> >>> >
>> >>> > On Thu, Sep 22, 2016 at 2:17 PM, Damian Minkov < > damencho@jitsi.org> > >> >>> > wrote:
>> >>> >>
>> >>> >> Hi,
>> >>> >>
>> >>> >> So jigasi is using jitsi's protocol and account management
>> >>> >> implementation. The easiest way it to install jitsi desktop
client,
>> >>> >> configure its sip account to work with freeswitch and then use
its
>> >>> >> configuration for jigasi sip account, you already saw the account
>> >>> >> properties that are about the sip account, you can find similar
and
>> >>> >> in
>> >>> >> jitsi desktop client config.
>> >>> >>
>> >>> >> Regards
>> >>> >> damencho
>> >>> >>
>> >>> >>
>> >>> >> On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> > wrote:
>> >>> >> > I installed freeswitch and try to use the existing user account
>> >>> >> > 1000
>> >>> >> > for
>> >>> >> > jigasi. But calling to this account goes to voicemail. I
suppose
>> >>> >> > the
>> >>> >> > jigasi
>> >>> >> > is not registering. How can I debug this problem ? I found my
>> >>> >> > sip-communicator.properties file for jigasi does not have any
sip
>> >>> >> > server
>> >>> >> > address specified by default apt-get installation.
>> >>> >> >
>> >>> >> > Thanks and regards,
>> >>> >> > Kai
>> >>> >> >
>> >>> >> > On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> > >> >>> >> > wrote:
>> >>> >> >>
>> >>> >> >> Okay thanks !
>> >>> >> >>
>> >>> >> >> On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov > >> >>> >> >> <damencho@jitsi.org> > >> >>> >> >> wrote:
>> >>> >> >>>
>> >>> >> >>> You just need username and password. And when you install
>> >>> >> >>> jigasi
>> >>> >> >>> it
>> >>> >> >>> asks for that info. I think it will work with
>> >>> >> >>> username@ip-address-freeswitch-is-listening-to and the
>> >>> >> >>> password.
>> >>> >> >>>
>> >>> >> >>> On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> > >> >>> >> >>> wrote:
>> >>> >> >>> > I see. So I need to install freeswitch and connect jigasi
>> >>> >> >>> > with
>> >>> >> >>> > it.
>> >>> >> >>> > Do
>> >>> >> >>> > you
>> >>> >> >>> > have an instruction on how to connect jigasi with a
>> >>> >> >>> > freeswitch
>> >>> >> >>> > installed on
>> >>> >> >>> > the same host ?
>> >>> >> >>> >
>> >>> >> >>> > Thanks,
>> >>> >> >>> > Kai
>> >>> >> >>> >
>> >>> >> >>> > On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov > >> >>> >> >>> > <damencho@jitsi.org> > >> >>> >> >>> > wrote:
>> >>> >> >>> >>
>> >>> >> >>> >> Jigasi is just a sip client that registers to your sip
>> >>> >> >>> >> service.
>> >>> >> >>> >> You
>> >>> >> >>> >> need to check its logs whether it is registered and
whether
>> >>> >> >>> >> it
>> >>> >> >>> >> is
>> >>> >> >>> >> receiving your invite. The invite should come from your
>> >>> >> >>> >> service,
>> >>> >> >>> >> you
>> >>> >> >>> >> cannot do it p2p if that is what you tested. I have been
>> >>> >> >>> >> testing
>> >>> >> >>> >> jigasi with asterisk with no problem.
>> >>> >> >>> >>
>> >>> >> >>> >> On Wed, Sep 21, 2016 at 1:52 PM, Kai K < > kai328us@gmail.com> > >> >>> >> >>> >> wrote:
>> >>> >> >>> >> > Hi damencho,
>> >>> >> >>> >> >
>> >>> >> >>> >> > Thanks for the advice. I have setup jit-meet and jigasi
on
>> >>> >> >>> >> > the
>> >>> >> >>> >> > same
>> >>> >> >>> >> > machine.
>> >>> >> >>> >> > I am able to do web meeting very well. I tried to send a
>> >>> >> >>> >> > SIP
>> >>> >> >>> >> > INVITE
>> >>> >> >>> >> > to
>> >>> >> >>> >> > myhost:5060 with header "Jitsi-Conference-Room:
room1234"
>> >>> >> >>> >> > to
>> >>> >> >>> >> > establish a
>> >>> >> >>> >> > meeting through SIP but the myhost:5060 never responds.
Do
>> >>> >> >>> >> > I
>> >>> >> >>> >> > need
>> >>> >> >>> >> > to
>> >>> >> >>> >> > install
>> >>> >> >>> >> > additional component for jigasi to work as a SIP
endpoint
>> >>> >> >>> >> > ?
>> >>> >> >>> >> >
>> >>> >> >>> >> > Thanks !
>> >>> >> >>> >> > Kai
>> >>> >> >>> >> >
>> >>> >> >>> >> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov > >> >>> >> >>> >> > <damencho@jitsi.org> > >> >>> >> >>> >> > wrote:
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> Hi,
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> You can use jigasi for sip connectivity.
>> >>> >> >>> >> >> https://github.com/jitsi/jigasi
>> >>> >> >>> >> >> There is nothing to configure in videobridge as jigasi
is
>> >>> >> >>> >> >> as
>> >>> >> >>> >> >> a
>> >>> >> >>> >> >> client
>> >>> >> >>> >> >> to videobridge, everything is handled by jicofo and
>> >>> >> >>> >> >> jitsi-meet.
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> Regards
>> >>> >> >>> >> >> damencho
>> >>> >> >>> >> >>
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K > >> >>> >> >>> >> >> <kai328us@gmail.com> > >> >>> >> >>> >> >> wrote:
>> >>> >> >>> >> >> > Hi, I would like to configure jitsi videobridge to
work
>> >>> >> >>> >> >> > with
>> >>> >> >>> >> >> > freeswitch
>> >>> >> >>> >> >> > or
>> >>> >> >>> >> >> > asterisk so that people calling freeswitch or
asterisk
>> >>> >> >>> >> >> > can
>> >>> >> >>> >> >> > join a
>> >>> >> >>> >> >> > video
>> >>> >> >>> >> >> > conference handled by jitsi videobridge. Would you
>> >>> >> >>> >> >> > please
>> >>> >> >>> >> >> > help
>> >>> >> >>> >> >> > to
>> >>> >> >>> >> >> > provide an
>> >>> >> >>> >> >> > instruction on how to configure both jitsi
videobridge
>> >>> >> >>> >> >> > and
>> >>> >> >>> >> >> > freeswitch
>> >>> >> >>> >> >> > or
>> >>> >> >>> >> >> > asterisk for this purpose ?
>> >>> >> >>> >> >> >
>> >>> >> >>> >> >> > Thanks a lot,
>> >>> >> >>> >> >> > Kai
>> >>> >> >>> >> >> >
>> >>> >> >>> >> >> > _______________________________________________
>> >>> >> >>> >> >> > dev mailing list
>> >>> >> >>> >> >> > dev@jitsi.org
>> >>> >> >>> >> >> > Unsubscribe instructions and other list options:
>> >>> >> >>> >> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> _______________________________________________
>> >>> >> >>> >> >> dev mailing list
>> >>> >> >>> >> >> dev@jitsi.org
>> >>> >> >>> >> >> Unsubscribe instructions and other list options:
>> >>> >> >>> >> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >> >
>> >>> >> >>> >> >
>> >>> >> >>> >> >
>> >>> >> >>> >> > _______________________________________________
>> >>> >> >>> >> > dev mailing list
>> >>> >> >>> >> > dev@jitsi.org
>> >>> >> >>> >> > Unsubscribe instructions and other list options:
>> >>> >> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >>
>> >>> >> >>> >> _______________________________________________
>> >>> >> >>> >> dev mailing list
>> >>> >> >>> >> dev@jitsi.org
>> >>> >> >>> >> Unsubscribe instructions and other list options:
>> >>> >> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >
>> >>> >> >>> >
>> >>> >> >>> >
>> >>> >> >>> > _______________________________________________
>> >>> >> >>> > dev mailing list
>> >>> >> >>> > dev@jitsi.org
>> >>> >> >>> > Unsubscribe instructions and other list options:
>> >>> >> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>>
>> >>> >> >>> _______________________________________________
>> >>> >> >>> dev mailing list
>> >>> >> >>> dev@jitsi.org
>> >>> >> >>> Unsubscribe instructions and other list options:
>> >>> >> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>
>> >>> >> >>
>> >>> >> >
>> >>> >> >
>> >>> >> > _______________________________________________
>> >>> >> > dev mailing list
>> >>> >> > dev@jitsi.org
>> >>> >> > Unsubscribe instructions and other list options:
>> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >>
>> >>> >> _______________________________________________
>> >>> >> dev mailing list
>> >>> >> dev@jitsi.org
>> >>> >> Unsubscribe instructions and other list options:
>> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >
>> >>> >
>> >>> >
>> >>> > _______________________________________________
>> >>> > dev mailing list
>> >>> > dev@jitsi.org
>> >>> > Unsubscribe instructions and other list options:
>> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>>
>> >>> _______________________________________________
>> >>> dev mailing list
>> >>> dev@jitsi.org
>> >>> Unsubscribe instructions and other list options:
>> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#19

I think the key issue is the jigasi client does not send back 200 OK. Do
you know why ?

Regards,
Kai

···

On Fri, Sep 23, 2016 at 2:52 PM, Kai K <kai328us@gmail.com> wrote:

No more. Free sip point of view, upon receiving INVITE from freeswitch,
jitagi only sends back 180, but never send back 200.

Thanks,
Kai

On Fri, Sep 23, 2016 at 2:30 PM, Damian Minkov <damencho@jitsi.org> wrote:

I do not see anything suspicious in these logs. And there is nothing
more? Hum.

On Fri, Sep 23, 2016 at 1:24 PM, Kai K <kai328us@gmail.com> wrote:
> when I connect to default room 'siptest' in a browser, I started a sip
> session to jigasi and can see the jigasi briefly connected to the
conference
> bridge but disappears quickly. The log says :
>
> 2016-09-23 18:10:35.966 SEVERE: [118] net.sf.fmj.media.Log.error()
Failed to
> prefetch: net.sf.fmj.media.ProcessEngine@2ee8f20e
> 2016-09-23 18:10:35.970 SEVERE: [117] net.sf.fmj.media.Log.error()
Error:
> Unable to prefetch net.sf.fmj.media.ProcessEngine@2ee8f20e
>
> 2016-09-23 18:10:36.154 INFO: [80]
> org.jitsi.jigasi.JvbConference.onJvbCallStarted().663 JVB conference
call
> IN_PROGRESS siptest
> 2016-09-23 18:10:36.155 INFO: [80]
> org.jitsi.jigasi.JvbConference.peerStateChanged().819
> 157583ddf65@callcontrol.10.xx.xx.xx JVB peer state:
> net.java.sip.communicator.service.protocol.CallPeerState:Connected
> 2016-09-23 18:10:36.155 INFO: [80]
> org.jitsi.jigasi.JvbConference.advertisePeerSSRCs().216 Peer
> net.java.sip.communicator.service.protocol.CallPeerState:Connected
SSRCs
> audio: 2464704801 video: null
> 2016-09-23 18:10:36.174 INFO: [129]
> impl.netaddr.NetworkAddressManagerServiceImpl.
createDatagramSocket().549
> Retrying a bind because of a failure to bind to address /10.xx.xx.xx and
> port 10002
> 2016-09-23 18:10:36.314 INFO: [129]
> service.protocol.media.MediaHandler.registerDynamicPTsWithStream().1002
> Dynamic PT map: 98=rtpmap:-1 iLBC/8000 fmtp:mode=20; 101=rtpmap:-1
> telephone-event/8000; 110=rtpmap:-1 speex/8000;
> 2016-09-23 18:10:36.314 INFO: [129]
> service.protocol.media.MediaHandler.registerDynamicPTsWithStream().1019
PT
> overrides []
> 2016-09-23 18:10:36.317 INFO: [129]
> org.jitsi.jigasi.GatewaySession.peerStateChanged().692
> 157583ddf65@callcontrol.10.xx.xx.xx SIP peer state: Connecting*
> 2016-09-23 18:10:36.319 INFO: [144]
> impl.protocol.sip.SipLogger.logInfo().196 Info from the JAIN-SIP stack:
> Setting SIPMessage peerPacketSource to: /54.xx.xx.xx:5060
> 2016-09-23 18:10:36.321 INFO: [144]
> org.jitsi.jigasi.GatewaySession.handleCallState().620 Sip call
IN_PROGRESS:
> Call: id=14746542323671460919724 peers=1
> 2016-09-23 18:10:36.321 INFO: [144]
> org.jitsi.jigasi.GatewaySession.handleCallState().628 SIP call format
used:
> rtpmap:8 PCMA/8000
> 2016-09-23 18:10:36.322 INFO: [144]
> org.jitsi.jigasi.GatewaySession.peerStateChanged().692
> 157583ddf65@callcontrol.10.xx.xx.xx SIP peer state: Connected
> 2016-09-23 18:10:36.322 INFO: [144]
> service.protocol.media.CallPeerMediaHandler.start().1932 Starting
> 2016-09-23 18:10:36.344 INFO: [145]
> impl.protocol.sip.SipLogger.logInfo().196 Info from the JAIN-SIP stack:
> Setting SIPMessage peerPacketSource to: /54.xx.xx.xx:5060
>
> My jitsi solution installed on AWS host.
>
> Thanks,
> Kai
>
> On Fri, Sep 23, 2016 at 1:49 PM, Damian Minkov <damencho@jitsi.org> >> wrote:
>>
>> Nope. The first part is if you are using xmpp authentication on the
>> server.
>> Not sure about the last one, if you see some certificate errors in
>> your logs you should enable it. You can try enabling that property, it
>> will just avoid any kind of certificate validation.
>>
>> On Fri, Sep 23, 2016 at 12:44 PM, Kai K <kai328us@gmail.com> wrote:
>> > I notice my jigasi conf has a section of default values.
>> >
>> > # If you want jigasi to perform authenticated login instead of
anonymous
>> > login
>> > # to the XMPP server, you can set the following properties.
>> > # org.jitsi.jigasi.xmpp.acc.USER_ID=SOME_USER@SOME_DOMAIN
>> > # org.jitsi.jigasi.xmpp.acc.PASS=SOME_PASS
>> > # org.jitsi.jigasi.xmpp.acc.ANONYMOUS_AUTH=false
>> >
>> > # If you want to use the SIP user part of the incoming/outgoing call
SIP
>> > URI
>> > # you can set the following property to true.
>> > # org.jitsi.jigasi.USE_SIP_USER_AS_XMPP_RESOURCE=true
>> >
>> > # Activate this property if you are using self-signed certificates or
>> > other
>> > # type of non-trusted certicates. In this mode your service trust in
the
>> > # remote certificates always.
>> > # net.java.sip.communicator.service.gui.ALWAYS_TRUST_MODE_ENAB
LED=true
>> >
>> > Should I change it and how ?
>> >
>> > Thanks,
>> > Kai
>> >
>> > On Fri, Sep 23, 2016 at 1:41 PM, Kai K <kai328us@gmail.com> wrote:
>> >>
>> >> Looks like the log complains :
>> >>
>> >> 2016-09-23 17:36:35.040 INFO: [52]
>> >> org.jitsi.jigasi.JvbConference.registrationStateChanged().544 XMPP
>> >> (157581ec3bd@callcontrol.10.71.18.104):
RegistrationStateChangeEvent[
>> >> oldState=Unregistered; newState=RegistrationState=Registering;
>> >> reasonCode=-1; reason=null]
>> >> 2016-09-23 17:36:35.052 SEVERE: [52]
>> >>
>> >> service.protocol.AbstractProtocolProviderService.fireRegistr
ationStateChanged().201
>> >> An error occurred while executing
>> >>
>> >> RegistrationStateChangeListener#registrationStateChanged(Reg
istrationStateChangeEvent)
>> >> of
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.OperationSetP
ersistentPresenceJabberImpl$RegistrationStateListener@6b57a931
>> >> java.lang.IllegalArgumentException: Connection cannot be anonymous
>> >> at
>> >> org.jivesoftware.smackx.packet.VCard.checkAuthenticated(
VCard.java:571)
>> >> at org.jivesoftware.smackx.packet
.VCard.load(VCard.java:511)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.OperationSetP
ersistentPresenceJabberImpl.createAccountPhotoPresenceInterc
eptor(OperationSetPersistentPresenceJabberImpl.java:1898)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.OperationSetP
ersistentPresenceJabberImpl$RegistrationStateListener.regist
rationStateChanged(OperationSetPersistentPresenceJabberImpl.java:1106)
>> >> at
>> >>
>> >> net.java.sip.communicator.service.protocol.AbstractProtocolP
roviderService.fireRegistrationStateChanged(AbstractProtocol
ProviderService.java:187)
>> >> at
>> >>
>> >> net.java.sip.communicator.service.protocol.AbstractProtocolP
roviderService.fireRegistrationStateChanged(AbstractProtocol
ProviderService.java:141)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.ProtocolProvi
derServiceJabberImpl.connectAndLogin(ProtocolProvid
erServiceJabberImpl.java:1314)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.ProtocolProvi
derServiceJabberImpl.connectAndLogin(ProtocolProvid
erServiceJabberImpl.java:944)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.ProtocolProvi
derServiceJabberImpl.initializeConnectAndLogin(Prot
ocolProviderServiceJabberImpl.java:755)
>> >> at
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.ProtocolProvi
derServiceJabberImpl.register(ProtocolProviderServiceJabberImpl.java:468)
>> >> at org.jitsi.jigasi.RegisterThrea
d.run(RegisterThread.java:58)
>> >> 2016-09-23 17:36:35.064 WARNING: [58]
>> >>
>> >> impl.protocol.jabber.OperationSetBasicInstantMessagingJabber
Impl.isCarbonSupported().775
>> >> Failed to retrieve carbon support.not-allowed(-1) Communication with
>> >> remote
>> >> domains is not enabled
>> >> 2016-09-23 17:36:35.072 SEVERE: [60]
>> >> impl.protocol.jabber.InfoRetreiver.retrieveDetails().361 Cannot
load
>> >> details
>> >> for contact 157581ec3bd@10.71.18.104 : item-not-found(-1
>> >>
>> >> Regards,
>> >> Kai
>> >>
>> >> On Fri, Sep 23, 2016 at 12:05 PM, Damian Minkov <damencho@jitsi.org >> > >> >> >> wrote:
>> >>>
>> >>> What does jigasi logs say?
>> >>>
>> >>> On Fri, Sep 23, 2016 at 10:42 AM, Kai K <kai328us@gmail.com> >> wrote:
>> >>> > Hi Damencho,
>> >>> >
>> >>> > I have set up the freeswitch account ready and I can see jigasi
>> >>> > registers to
>> >>> > freeswitch, receives the INVITE and replies 180. But it never
>> >>> > proceed
>> >>> > to 200
>> >>> > OK until timeout. Would you please let me know how I can debug
this
>> >>> > problem
>> >>> > ?
>> >>> >
>> >>> > Thanks !
>> >>> > Kai
>> >>> >
>> >>> > On Thu, Sep 22, 2016 at 2:17 PM, Damian Minkov < >> damencho@jitsi.org> >> >> >>> > wrote:
>> >>> >>
>> >>> >> Hi,
>> >>> >>
>> >>> >> So jigasi is using jitsi's protocol and account management
>> >>> >> implementation. The easiest way it to install jitsi desktop
client,
>> >>> >> configure its sip account to work with freeswitch and then use
its
>> >>> >> configuration for jigasi sip account, you already saw the
account
>> >>> >> properties that are about the sip account, you can find similar
and
>> >>> >> in
>> >>> >> jitsi desktop client config.
>> >>> >>
>> >>> >> Regards
>> >>> >> damencho
>> >>> >>
>> >>> >>
>> >>> >> On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> >> wrote:
>> >>> >> > I installed freeswitch and try to use the existing user
account
>> >>> >> > 1000
>> >>> >> > for
>> >>> >> > jigasi. But calling to this account goes to voicemail. I
suppose
>> >>> >> > the
>> >>> >> > jigasi
>> >>> >> > is not registering. How can I debug this problem ? I found my
>> >>> >> > sip-communicator.properties file for jigasi does not have any
sip
>> >>> >> > server
>> >>> >> > address specified by default apt-get installation.
>> >>> >> >
>> >>> >> > Thanks and regards,
>> >>> >> > Kai
>> >>> >> >
>> >>> >> > On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> >> >> >>> >> > wrote:
>> >>> >> >>
>> >>> >> >> Okay thanks !
>> >>> >> >>
>> >>> >> >> On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov >> >> >>> >> >> <damencho@jitsi.org> >> >> >>> >> >> wrote:
>> >>> >> >>>
>> >>> >> >>> You just need username and password. And when you install
>> >>> >> >>> jigasi
>> >>> >> >>> it
>> >>> >> >>> asks for that info. I think it will work with
>> >>> >> >>> username@ip-address-freeswitch-is-listening-to and the
>> >>> >> >>> password.
>> >>> >> >>>
>> >>> >> >>> On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> >> >> >>> >> >>> wrote:
>> >>> >> >>> > I see. So I need to install freeswitch and connect jigasi
>> >>> >> >>> > with
>> >>> >> >>> > it.
>> >>> >> >>> > Do
>> >>> >> >>> > you
>> >>> >> >>> > have an instruction on how to connect jigasi with a
>> >>> >> >>> > freeswitch
>> >>> >> >>> > installed on
>> >>> >> >>> > the same host ?
>> >>> >> >>> >
>> >>> >> >>> > Thanks,
>> >>> >> >>> > Kai
>> >>> >> >>> >
>> >>> >> >>> > On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov >> >> >>> >> >>> > <damencho@jitsi.org> >> >> >>> >> >>> > wrote:
>> >>> >> >>> >>
>> >>> >> >>> >> Jigasi is just a sip client that registers to your sip
>> >>> >> >>> >> service.
>> >>> >> >>> >> You
>> >>> >> >>> >> need to check its logs whether it is registered and
whether
>> >>> >> >>> >> it
>> >>> >> >>> >> is
>> >>> >> >>> >> receiving your invite. The invite should come from your
>> >>> >> >>> >> service,
>> >>> >> >>> >> you
>> >>> >> >>> >> cannot do it p2p if that is what you tested. I have been
>> >>> >> >>> >> testing
>> >>> >> >>> >> jigasi with asterisk with no problem.
>> >>> >> >>> >>
>> >>> >> >>> >> On Wed, Sep 21, 2016 at 1:52 PM, Kai K < >> kai328us@gmail.com> >> >> >>> >> >>> >> wrote:
>> >>> >> >>> >> > Hi damencho,
>> >>> >> >>> >> >
>> >>> >> >>> >> > Thanks for the advice. I have setup jit-meet and
jigasi on
>> >>> >> >>> >> > the
>> >>> >> >>> >> > same
>> >>> >> >>> >> > machine.
>> >>> >> >>> >> > I am able to do web meeting very well. I tried to send
a
>> >>> >> >>> >> > SIP
>> >>> >> >>> >> > INVITE
>> >>> >> >>> >> > to
>> >>> >> >>> >> > myhost:5060 with header "Jitsi-Conference-Room:
room1234"
>> >>> >> >>> >> > to
>> >>> >> >>> >> > establish a
>> >>> >> >>> >> > meeting through SIP but the myhost:5060 never
responds. Do
>> >>> >> >>> >> > I
>> >>> >> >>> >> > need
>> >>> >> >>> >> > to
>> >>> >> >>> >> > install
>> >>> >> >>> >> > additional component for jigasi to work as a SIP
endpoint
>> >>> >> >>> >> > ?
>> >>> >> >>> >> >
>> >>> >> >>> >> > Thanks !
>> >>> >> >>> >> > Kai
>> >>> >> >>> >> >
>> >>> >> >>> >> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov >> >> >>> >> >>> >> > <damencho@jitsi.org> >> >> >>> >> >>> >> > wrote:
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> Hi,
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> You can use jigasi for sip connectivity.
>> >>> >> >>> >> >> https://github.com/jitsi/jigasi
>> >>> >> >>> >> >> There is nothing to configure in videobridge as
jigasi is
>> >>> >> >>> >> >> as
>> >>> >> >>> >> >> a
>> >>> >> >>> >> >> client
>> >>> >> >>> >> >> to videobridge, everything is handled by jicofo and
>> >>> >> >>> >> >> jitsi-meet.
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> Regards
>> >>> >> >>> >> >> damencho
>> >>> >> >>> >> >>
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K >> >> >>> >> >>> >> >> <kai328us@gmail.com> >> >> >>> >> >>> >> >> wrote:
>> >>> >> >>> >> >> > Hi, I would like to configure jitsi videobridge to
work
>> >>> >> >>> >> >> > with
>> >>> >> >>> >> >> > freeswitch
>> >>> >> >>> >> >> > or
>> >>> >> >>> >> >> > asterisk so that people calling freeswitch or
asterisk
>> >>> >> >>> >> >> > can
>> >>> >> >>> >> >> > join a
>> >>> >> >>> >> >> > video
>> >>> >> >>> >> >> > conference handled by jitsi videobridge. Would you
>> >>> >> >>> >> >> > please
>> >>> >> >>> >> >> > help
>> >>> >> >>> >> >> > to
>> >>> >> >>> >> >> > provide an
>> >>> >> >>> >> >> > instruction on how to configure both jitsi
videobridge
>> >>> >> >>> >> >> > and
>> >>> >> >>> >> >> > freeswitch
>> >>> >> >>> >> >> > or
>> >>> >> >>> >> >> > asterisk for this purpose ?
>> >>> >> >>> >> >> >
>> >>> >> >>> >> >> > Thanks a lot,
>> >>> >> >>> >> >> > Kai
>> >>> >> >>> >> >> >
>> >>> >> >>> >> >> > _______________________________________________
>> >>> >> >>> >> >> > dev mailing list
>> >>> >> >>> >> >> > dev@jitsi.org
>> >>> >> >>> >> >> > Unsubscribe instructions and other list options:
>> >>> >> >>> >> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> _______________________________________________
>> >>> >> >>> >> >> dev mailing list
>> >>> >> >>> >> >> dev@jitsi.org
>> >>> >> >>> >> >> Unsubscribe instructions and other list options:
>> >>> >> >>> >> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >> >
>> >>> >> >>> >> >
>> >>> >> >>> >> >
>> >>> >> >>> >> > _______________________________________________
>> >>> >> >>> >> > dev mailing list
>> >>> >> >>> >> > dev@jitsi.org
>> >>> >> >>> >> > Unsubscribe instructions and other list options:
>> >>> >> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >>
>> >>> >> >>> >> _______________________________________________
>> >>> >> >>> >> dev mailing list
>> >>> >> >>> >> dev@jitsi.org
>> >>> >> >>> >> Unsubscribe instructions and other list options:
>> >>> >> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >
>> >>> >> >>> >
>> >>> >> >>> >
>> >>> >> >>> > _______________________________________________
>> >>> >> >>> > dev mailing list
>> >>> >> >>> > dev@jitsi.org
>> >>> >> >>> > Unsubscribe instructions and other list options:
>> >>> >> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>>
>> >>> >> >>> _______________________________________________
>> >>> >> >>> dev mailing list
>> >>> >> >>> dev@jitsi.org
>> >>> >> >>> Unsubscribe instructions and other list options:
>> >>> >> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>
>> >>> >> >>
>> >>> >> >
>> >>> >> >
>> >>> >> > _______________________________________________
>> >>> >> > dev mailing list
>> >>> >> > dev@jitsi.org
>> >>> >> > Unsubscribe instructions and other list options:
>> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >>
>> >>> >> _______________________________________________
>> >>> >> dev mailing list
>> >>> >> dev@jitsi.org
>> >>> >> Unsubscribe instructions and other list options:
>> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >
>> >>> >
>> >>> >
>> >>> > _______________________________________________
>> >>> > dev mailing list
>> >>> > dev@jitsi.org
>> >>> > Unsubscribe instructions and other list options:
>> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>>
>> >>> _______________________________________________
>> >>> dev mailing list
>> >>> dev@jitsi.org
>> >>> Unsubscribe instructions and other list options:
>> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#20

No idea, sorry.

···

On Fri, Sep 23, 2016 at 2:06 PM, Kai K <kai328us@gmail.com> wrote:

I think the key issue is the jigasi client does not send back 200 OK. Do you
know why ?

Regards,
Kai

On Fri, Sep 23, 2016 at 2:52 PM, Kai K <kai328us@gmail.com> wrote:

No more. Free sip point of view, upon receiving INVITE from freeswitch,
jitagi only sends back 180, but never send back 200.

Thanks,
Kai

On Fri, Sep 23, 2016 at 2:30 PM, Damian Minkov <damencho@jitsi.org> wrote:

I do not see anything suspicious in these logs. And there is nothing
more? Hum.

On Fri, Sep 23, 2016 at 1:24 PM, Kai K <kai328us@gmail.com> wrote:
> when I connect to default room 'siptest' in a browser, I started a sip
> session to jigasi and can see the jigasi briefly connected to the
> conference
> bridge but disappears quickly. The log says :
>
> 2016-09-23 18:10:35.966 SEVERE: [118] net.sf.fmj.media.Log.error()
> Failed to
> prefetch: net.sf.fmj.media.ProcessEngine@2ee8f20e
> 2016-09-23 18:10:35.970 SEVERE: [117] net.sf.fmj.media.Log.error()
> Error:
> Unable to prefetch net.sf.fmj.media.ProcessEngine@2ee8f20e
>
> 2016-09-23 18:10:36.154 INFO: [80]
> org.jitsi.jigasi.JvbConference.onJvbCallStarted().663 JVB conference
> call
> IN_PROGRESS siptest
> 2016-09-23 18:10:36.155 INFO: [80]
> org.jitsi.jigasi.JvbConference.peerStateChanged().819
> 157583ddf65@callcontrol.10.xx.xx.xx JVB peer state:
> net.java.sip.communicator.service.protocol.CallPeerState:Connected
> 2016-09-23 18:10:36.155 INFO: [80]
> org.jitsi.jigasi.JvbConference.advertisePeerSSRCs().216 Peer
> net.java.sip.communicator.service.protocol.CallPeerState:Connected
> SSRCs
> audio: 2464704801 video: null
> 2016-09-23 18:10:36.174 INFO: [129]
>
> impl.netaddr.NetworkAddressManagerServiceImpl.createDatagramSocket().549
> Retrying a bind because of a failure to bind to address /10.xx.xx.xx
> and
> port 10002
> 2016-09-23 18:10:36.314 INFO: [129]
> service.protocol.media.MediaHandler.registerDynamicPTsWithStream().1002
> Dynamic PT map: 98=rtpmap:-1 iLBC/8000 fmtp:mode=20; 101=rtpmap:-1
> telephone-event/8000; 110=rtpmap:-1 speex/8000;
> 2016-09-23 18:10:36.314 INFO: [129]
> service.protocol.media.MediaHandler.registerDynamicPTsWithStream().1019
> PT
> overrides []
> 2016-09-23 18:10:36.317 INFO: [129]
> org.jitsi.jigasi.GatewaySession.peerStateChanged().692
> 157583ddf65@callcontrol.10.xx.xx.xx SIP peer state: Connecting*
> 2016-09-23 18:10:36.319 INFO: [144]
> impl.protocol.sip.SipLogger.logInfo().196 Info from the JAIN-SIP stack:
> Setting SIPMessage peerPacketSource to: /54.xx.xx.xx:5060
> 2016-09-23 18:10:36.321 INFO: [144]
> org.jitsi.jigasi.GatewaySession.handleCallState().620 Sip call
> IN_PROGRESS:
> Call: id=14746542323671460919724 peers=1
> 2016-09-23 18:10:36.321 INFO: [144]
> org.jitsi.jigasi.GatewaySession.handleCallState().628 SIP call format
> used:
> rtpmap:8 PCMA/8000
> 2016-09-23 18:10:36.322 INFO: [144]
> org.jitsi.jigasi.GatewaySession.peerStateChanged().692
> 157583ddf65@callcontrol.10.xx.xx.xx SIP peer state: Connected
> 2016-09-23 18:10:36.322 INFO: [144]
> service.protocol.media.CallPeerMediaHandler.start().1932 Starting
> 2016-09-23 18:10:36.344 INFO: [145]
> impl.protocol.sip.SipLogger.logInfo().196 Info from the JAIN-SIP stack:
> Setting SIPMessage peerPacketSource to: /54.xx.xx.xx:5060
>
> My jitsi solution installed on AWS host.
>
> Thanks,
> Kai
>
> On Fri, Sep 23, 2016 at 1:49 PM, Damian Minkov <damencho@jitsi.org> >>> > wrote:
>>
>> Nope. The first part is if you are using xmpp authentication on the
>> server.
>> Not sure about the last one, if you see some certificate errors in
>> your logs you should enable it. You can try enabling that property, it
>> will just avoid any kind of certificate validation.
>>
>> On Fri, Sep 23, 2016 at 12:44 PM, Kai K <kai328us@gmail.com> wrote:
>> > I notice my jigasi conf has a section of default values.
>> >
>> > # If you want jigasi to perform authenticated login instead of
>> > anonymous
>> > login
>> > # to the XMPP server, you can set the following properties.
>> > # org.jitsi.jigasi.xmpp.acc.USER_ID=SOME_USER@SOME_DOMAIN
>> > # org.jitsi.jigasi.xmpp.acc.PASS=SOME_PASS
>> > # org.jitsi.jigasi.xmpp.acc.ANONYMOUS_AUTH=false
>> >
>> > # If you want to use the SIP user part of the incoming/outgoing call
>> > SIP
>> > URI
>> > # you can set the following property to true.
>> > # org.jitsi.jigasi.USE_SIP_USER_AS_XMPP_RESOURCE=true
>> >
>> > # Activate this property if you are using self-signed certificates
>> > or
>> > other
>> > # type of non-trusted certicates. In this mode your service trust in
>> > the
>> > # remote certificates always.
>> > #
>> > net.java.sip.communicator.service.gui.ALWAYS_TRUST_MODE_ENABLED=true
>> >
>> > Should I change it and how ?
>> >
>> > Thanks,
>> > Kai
>> >
>> > On Fri, Sep 23, 2016 at 1:41 PM, Kai K <kai328us@gmail.com> wrote:
>> >>
>> >> Looks like the log complains :
>> >>
>> >> 2016-09-23 17:36:35.040 INFO: [52]
>> >> org.jitsi.jigasi.JvbConference.registrationStateChanged().544 XMPP
>> >> (157581ec3bd@callcontrol.10.71.18.104):
>> >> RegistrationStateChangeEvent[
>> >> oldState=Unregistered; newState=RegistrationState=Registering;
>> >> reasonCode=-1; reason=null]
>> >> 2016-09-23 17:36:35.052 SEVERE: [52]
>> >>
>> >>
>> >> service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged().201
>> >> An error occurred while executing
>> >>
>> >>
>> >> RegistrationStateChangeListener#registrationStateChanged(RegistrationStateChangeEvent)
>> >> of
>> >>
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl$RegistrationStateListener@6b57a931
>> >> java.lang.IllegalArgumentException: Connection cannot be anonymous
>> >> at
>> >>
>> >> org.jivesoftware.smackx.packet.VCard.checkAuthenticated(VCard.java:571)
>> >> at
>> >> org.jivesoftware.smackx.packet.VCard.load(VCard.java:511)
>> >> at
>> >>
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl.createAccountPhotoPresenceInterceptor(OperationSetPersistentPresenceJabberImpl.java:1898)
>> >> at
>> >>
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.OperationSetPersistentPresenceJabberImpl$RegistrationStateListener.registrationStateChanged(OperationSetPersistentPresenceJabberImpl.java:1106)
>> >> at
>> >>
>> >>
>> >> net.java.sip.communicator.service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged(AbstractProtocolProviderService.java:187)
>> >> at
>> >>
>> >>
>> >> net.java.sip.communicator.service.protocol.AbstractProtocolProviderService.fireRegistrationStateChanged(AbstractProtocolProviderService.java:141)
>> >> at
>> >>
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.connectAndLogin(ProtocolProviderServiceJabberImpl.java:1314)
>> >> at
>> >>
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.connectAndLogin(ProtocolProviderServiceJabberImpl.java:944)
>> >> at
>> >>
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.initializeConnectAndLogin(ProtocolProviderServiceJabberImpl.java:755)
>> >> at
>> >>
>> >>
>> >> net.java.sip.communicator.impl.protocol.jabber.ProtocolProviderServiceJabberImpl.register(ProtocolProviderServiceJabberImpl.java:468)
>> >> at
>> >> org.jitsi.jigasi.RegisterThread.run(RegisterThread.java:58)
>> >> 2016-09-23 17:36:35.064 WARNING: [58]
>> >>
>> >>
>> >> impl.protocol.jabber.OperationSetBasicInstantMessagingJabberImpl.isCarbonSupported().775
>> >> Failed to retrieve carbon support.not-allowed(-1) Communication
>> >> with
>> >> remote
>> >> domains is not enabled
>> >> 2016-09-23 17:36:35.072 SEVERE: [60]
>> >> impl.protocol.jabber.InfoRetreiver.retrieveDetails().361 Cannot
>> >> load
>> >> details
>> >> for contact 157581ec3bd@10.71.18.104 : item-not-found(-1
>> >>
>> >> Regards,
>> >> Kai
>> >>
>> >> On Fri, Sep 23, 2016 at 12:05 PM, Damian Minkov >>> >> >> <damencho@jitsi.org> >>> >> >> wrote:
>> >>>
>> >>> What does jigasi logs say?
>> >>>
>> >>> On Fri, Sep 23, 2016 at 10:42 AM, Kai K <kai328us@gmail.com> >>> >> >>> wrote:
>> >>> > Hi Damencho,
>> >>> >
>> >>> > I have set up the freeswitch account ready and I can see jigasi
>> >>> > registers to
>> >>> > freeswitch, receives the INVITE and replies 180. But it never
>> >>> > proceed
>> >>> > to 200
>> >>> > OK until timeout. Would you please let me know how I can debug
>> >>> > this
>> >>> > problem
>> >>> > ?
>> >>> >
>> >>> > Thanks !
>> >>> > Kai
>> >>> >
>> >>> > On Thu, Sep 22, 2016 at 2:17 PM, Damian Minkov >>> >> >>> > <damencho@jitsi.org> >>> >> >>> > wrote:
>> >>> >>
>> >>> >> Hi,
>> >>> >>
>> >>> >> So jigasi is using jitsi's protocol and account management
>> >>> >> implementation. The easiest way it to install jitsi desktop
>> >>> >> client,
>> >>> >> configure its sip account to work with freeswitch and then use
>> >>> >> its
>> >>> >> configuration for jigasi sip account, you already saw the
>> >>> >> account
>> >>> >> properties that are about the sip account, you can find similar
>> >>> >> and
>> >>> >> in
>> >>> >> jitsi desktop client config.
>> >>> >>
>> >>> >> Regards
>> >>> >> damencho
>> >>> >>
>> >>> >>
>> >>> >> On Thu, Sep 22, 2016 at 12:59 PM, Kai K <kai328us@gmail.com> >>> >> >>> >> wrote:
>> >>> >> > I installed freeswitch and try to use the existing user
>> >>> >> > account
>> >>> >> > 1000
>> >>> >> > for
>> >>> >> > jigasi. But calling to this account goes to voicemail. I
>> >>> >> > suppose
>> >>> >> > the
>> >>> >> > jigasi
>> >>> >> > is not registering. How can I debug this problem ? I found my
>> >>> >> > sip-communicator.properties file for jigasi does not have any
>> >>> >> > sip
>> >>> >> > server
>> >>> >> > address specified by default apt-get installation.
>> >>> >> >
>> >>> >> > Thanks and regards,
>> >>> >> > Kai
>> >>> >> >
>> >>> >> > On Wed, Sep 21, 2016 at 3:59 PM, Kai K <kai328us@gmail.com> >>> >> >>> >> > wrote:
>> >>> >> >>
>> >>> >> >> Okay thanks !
>> >>> >> >>
>> >>> >> >> On Wed, Sep 21, 2016 at 3:24 PM, Damian Minkov >>> >> >>> >> >> <damencho@jitsi.org> >>> >> >>> >> >> wrote:
>> >>> >> >>>
>> >>> >> >>> You just need username and password. And when you install
>> >>> >> >>> jigasi
>> >>> >> >>> it
>> >>> >> >>> asks for that info. I think it will work with
>> >>> >> >>> username@ip-address-freeswitch-is-listening-to and the
>> >>> >> >>> password.
>> >>> >> >>>
>> >>> >> >>> On Wed, Sep 21, 2016 at 2:15 PM, Kai K <kai328us@gmail.com> >>> >> >>> >> >>> wrote:
>> >>> >> >>> > I see. So I need to install freeswitch and connect jigasi
>> >>> >> >>> > with
>> >>> >> >>> > it.
>> >>> >> >>> > Do
>> >>> >> >>> > you
>> >>> >> >>> > have an instruction on how to connect jigasi with a
>> >>> >> >>> > freeswitch
>> >>> >> >>> > installed on
>> >>> >> >>> > the same host ?
>> >>> >> >>> >
>> >>> >> >>> > Thanks,
>> >>> >> >>> > Kai
>> >>> >> >>> >
>> >>> >> >>> > On Wed, Sep 21, 2016 at 3:01 PM, Damian Minkov >>> >> >>> >> >>> > <damencho@jitsi.org> >>> >> >>> >> >>> > wrote:
>> >>> >> >>> >>
>> >>> >> >>> >> Jigasi is just a sip client that registers to your sip
>> >>> >> >>> >> service.
>> >>> >> >>> >> You
>> >>> >> >>> >> need to check its logs whether it is registered and
>> >>> >> >>> >> whether
>> >>> >> >>> >> it
>> >>> >> >>> >> is
>> >>> >> >>> >> receiving your invite. The invite should come from your
>> >>> >> >>> >> service,
>> >>> >> >>> >> you
>> >>> >> >>> >> cannot do it p2p if that is what you tested. I have been
>> >>> >> >>> >> testing
>> >>> >> >>> >> jigasi with asterisk with no problem.
>> >>> >> >>> >>
>> >>> >> >>> >> On Wed, Sep 21, 2016 at 1:52 PM, Kai K >>> >> >>> >> >>> >> <kai328us@gmail.com> >>> >> >>> >> >>> >> wrote:
>> >>> >> >>> >> > Hi damencho,
>> >>> >> >>> >> >
>> >>> >> >>> >> > Thanks for the advice. I have setup jit-meet and
>> >>> >> >>> >> > jigasi on
>> >>> >> >>> >> > the
>> >>> >> >>> >> > same
>> >>> >> >>> >> > machine.
>> >>> >> >>> >> > I am able to do web meeting very well. I tried to send
>> >>> >> >>> >> > a
>> >>> >> >>> >> > SIP
>> >>> >> >>> >> > INVITE
>> >>> >> >>> >> > to
>> >>> >> >>> >> > myhost:5060 with header "Jitsi-Conference-Room:
>> >>> >> >>> >> > room1234"
>> >>> >> >>> >> > to
>> >>> >> >>> >> > establish a
>> >>> >> >>> >> > meeting through SIP but the myhost:5060 never
>> >>> >> >>> >> > responds. Do
>> >>> >> >>> >> > I
>> >>> >> >>> >> > need
>> >>> >> >>> >> > to
>> >>> >> >>> >> > install
>> >>> >> >>> >> > additional component for jigasi to work as a SIP
>> >>> >> >>> >> > endpoint
>> >>> >> >>> >> > ?
>> >>> >> >>> >> >
>> >>> >> >>> >> > Thanks !
>> >>> >> >>> >> > Kai
>> >>> >> >>> >> >
>> >>> >> >>> >> > On Tue, Sep 20, 2016 at 4:50 PM, Damian Minkov >>> >> >>> >> >>> >> > <damencho@jitsi.org> >>> >> >>> >> >>> >> > wrote:
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> Hi,
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> You can use jigasi for sip connectivity.
>> >>> >> >>> >> >> https://github.com/jitsi/jigasi
>> >>> >> >>> >> >> There is nothing to configure in videobridge as
>> >>> >> >>> >> >> jigasi is
>> >>> >> >>> >> >> as
>> >>> >> >>> >> >> a
>> >>> >> >>> >> >> client
>> >>> >> >>> >> >> to videobridge, everything is handled by jicofo and
>> >>> >> >>> >> >> jitsi-meet.
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> Regards
>> >>> >> >>> >> >> damencho
>> >>> >> >>> >> >>
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> On Tue, Sep 20, 2016 at 3:37 PM, Kai K >>> >> >>> >> >>> >> >> <kai328us@gmail.com> >>> >> >>> >> >>> >> >> wrote:
>> >>> >> >>> >> >> > Hi, I would like to configure jitsi videobridge to
>> >>> >> >>> >> >> > work
>> >>> >> >>> >> >> > with
>> >>> >> >>> >> >> > freeswitch
>> >>> >> >>> >> >> > or
>> >>> >> >>> >> >> > asterisk so that people calling freeswitch or
>> >>> >> >>> >> >> > asterisk
>> >>> >> >>> >> >> > can
>> >>> >> >>> >> >> > join a
>> >>> >> >>> >> >> > video
>> >>> >> >>> >> >> > conference handled by jitsi videobridge. Would you
>> >>> >> >>> >> >> > please
>> >>> >> >>> >> >> > help
>> >>> >> >>> >> >> > to
>> >>> >> >>> >> >> > provide an
>> >>> >> >>> >> >> > instruction on how to configure both jitsi
>> >>> >> >>> >> >> > videobridge
>> >>> >> >>> >> >> > and
>> >>> >> >>> >> >> > freeswitch
>> >>> >> >>> >> >> > or
>> >>> >> >>> >> >> > asterisk for this purpose ?
>> >>> >> >>> >> >> >
>> >>> >> >>> >> >> > Thanks a lot,
>> >>> >> >>> >> >> > Kai
>> >>> >> >>> >> >> >
>> >>> >> >>> >> >> > _______________________________________________
>> >>> >> >>> >> >> > dev mailing list
>> >>> >> >>> >> >> > dev@jitsi.org
>> >>> >> >>> >> >> > Unsubscribe instructions and other list options:
>> >>> >> >>> >> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >> >>
>> >>> >> >>> >> >> _______________________________________________
>> >>> >> >>> >> >> dev mailing list
>> >>> >> >>> >> >> dev@jitsi.org
>> >>> >> >>> >> >> Unsubscribe instructions and other list options:
>> >>> >> >>> >> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >> >
>> >>> >> >>> >> >
>> >>> >> >>> >> >
>> >>> >> >>> >> > _______________________________________________
>> >>> >> >>> >> > dev mailing list
>> >>> >> >>> >> > dev@jitsi.org
>> >>> >> >>> >> > Unsubscribe instructions and other list options:
>> >>> >> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >>
>> >>> >> >>> >> _______________________________________________
>> >>> >> >>> >> dev mailing list
>> >>> >> >>> >> dev@jitsi.org
>> >>> >> >>> >> Unsubscribe instructions and other list options:
>> >>> >> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>> >
>> >>> >> >>> >
>> >>> >> >>> >
>> >>> >> >>> > _______________________________________________
>> >>> >> >>> > dev mailing list
>> >>> >> >>> > dev@jitsi.org
>> >>> >> >>> > Unsubscribe instructions and other list options:
>> >>> >> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>>
>> >>> >> >>> _______________________________________________
>> >>> >> >>> dev mailing list
>> >>> >> >>> dev@jitsi.org
>> >>> >> >>> Unsubscribe instructions and other list options:
>> >>> >> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >> >>
>> >>> >> >>
>> >>> >> >
>> >>> >> >
>> >>> >> > _______________________________________________
>> >>> >> > dev mailing list
>> >>> >> > dev@jitsi.org
>> >>> >> > Unsubscribe instructions and other list options:
>> >>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >>
>> >>> >> _______________________________________________
>> >>> >> dev mailing list
>> >>> >> dev@jitsi.org
>> >>> >> Unsubscribe instructions and other list options:
>> >>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >>> >
>> >>> >
>> >>> >
>> >>> > _______________________________________________
>> >>> > dev mailing list
>> >>> > dev@jitsi.org
>> >>> > Unsubscribe instructions and other list options:
>> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>>
>> >>> _______________________________________________
>> >>> dev mailing list
>> >>> dev@jitsi.org
>> >>> Unsubscribe instructions and other list options:
>> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev