[jitsi-dev] Does Jitsi support some kind of Spark-like contact search service?


#1

Hello devs,

Our company is using a Spark IM setup for internal IM.

Yesterday I tried to long in with Jitsi client and it seems to work great
except I can't seem to find a Spark's "search service" alternative in
Jitsi. It seems that my Spark client is connected to the company's internal
LDAP server and the only thing that I have to configure from a user's
perspective is the search service FQDN.

So are there any alternatives to that in Jitsi? Or is there any other way
to traverse the ldap so that I can list contacts that are not part of my
contact list?

Thanks in advance!

Best regards,
Marin


#2

Hi,

you can configure ldap contact source in Options -> Advanced ->
Contact Sources. And then it will search in ldap on every contact list
search.

Regards
damencho

···

On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> wrote:

Hello devs,

Our company is using a Spark IM setup for internal IM.

Yesterday I tried to long in with Jitsi client and it seems to work great
except I can't seem to find a Spark's "search service" alternative in Jitsi.
It seems that my Spark client is connected to the company's internal LDAP
server and the only thing that I have to configure from a user's perspective
is the search service FQDN.

So are there any alternatives to that in Jitsi? Or is there any other way to
traverse the ldap so that I can list contacts that are not part of my
contact list?

Thanks in advance!

Best regards,
Marin

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#3

Hi,

Just found out that if I log in Pidgin I also have this search service
available without configuring anything and I can search for contacts that
are not in my list from Accounts->My account->Search for Users

you can configure ldap contact source in Options -> Advanced ->
Contact Sources. And then it will search in ldap on every contact list

Thanks! Although I still haven't managed to configure it successfully it
might be usefull :slight_smile:

Best regards,
Marin

···

On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov <damencho@jitsi.org> wrote:

Hi,

you can configure ldap contact source in Options -> Advanced ->
Contact Sources. And then it will search in ldap on every contact list
search.

Regards
damencho

On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> > wrote:
> Hello devs,
>
> Our company is using a Spark IM setup for internal IM.
>
> Yesterday I tried to long in with Jitsi client and it seems to work great
> except I can't seem to find a Spark's "search service" alternative in
Jitsi.
> It seems that my Spark client is connected to the company's internal LDAP
> server and the only thing that I have to configure from a user's
perspective
> is the search service FQDN.
>
> So are there any alternatives to that in Jitsi? Or is there any other
way to
> traverse the ldap so that I can list contacts that are not part of my
> contact list?
>
> Thanks in advance!
>
> Best regards,
> Marin
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#4

Hi again,

Thanks Damencho, the LDAP works and I can successfully list contacts that
are not part of my list. However, I can not send them any messages unless I
add them to my contact list first. Or is there any config that changes this
behaviour?

Best regards,
Marin

···

On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> wrote:

Hi,

Just found out that if I log in Pidgin I also have this search service
available without configuring anything and I can search for contacts that
are not in my list from Accounts->My account->Search for Users

> you can configure ldap contact source in Options -> Advanced ->
> Contact Sources. And then it will search in ldap on every contact list

Thanks! Although I still haven't managed to configure it successfully it
might be usefull :slight_smile:

Best regards,
Marin

On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov <damencho@jitsi.org> wrote:

Hi,

you can configure ldap contact source in Options -> Advanced ->
Contact Sources. And then it will search in ldap on every contact list
search.

Regards
damencho

On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> >> wrote:
> Hello devs,
>
> Our company is using a Spark IM setup for internal IM.
>
> Yesterday I tried to long in with Jitsi client and it seems to work
great
> except I can't seem to find a Spark's "search service" alternative in
Jitsi.
> It seems that my Spark client is connected to the company's internal
LDAP
> server and the only thing that I have to configure from a user's
perspective
> is the search service FQDN.
>
> So are there any alternatives to that in Jitsi? Or is there any other
way to
> traverse the ldap so that I can list contacts that are not part of my
> contact list?
>
> Thanks in advance!
>
> Best regards,
> Marin
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#5

Hi,

if you want to send an xmpp message, it needs to be to a contact from
the contact list.

Regards
damencho

···

On Thu, Sep 18, 2014 at 5:18 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> wrote:

Hi again,

Thanks Damencho, the LDAP works and I can successfully list contacts that
are not part of my list. However, I can not send them any messages unless I
add them to my contact list first. Or is there any config that changes this
behaviour?

Best regards,
Marin

On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> > wrote:

Hi,

Just found out that if I log in Pidgin I also have this search service
available without configuring anything and I can search for contacts that
are not in my list from Accounts->My account->Search for Users

> you can configure ldap contact source in Options -> Advanced ->
> Contact Sources. And then it will search in ldap on every contact list

Thanks! Although I still haven't managed to configure it successfully it
might be usefull :slight_smile:

Best regards,
Marin

On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov <damencho@jitsi.org> wrote:

Hi,

you can configure ldap contact source in Options -> Advanced ->
Contact Sources. And then it will search in ldap on every contact list
search.

Regards
damencho

On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> >>> wrote:
> Hello devs,
>
> Our company is using a Spark IM setup for internal IM.
>
> Yesterday I tried to long in with Jitsi client and it seems to work
> great
> except I can't seem to find a Spark's "search service" alternative in
> Jitsi.
> It seems that my Spark client is connected to the company's internal
> LDAP
> server and the only thing that I have to configure from a user's
> perspective
> is the search service FQDN.
>
> So are there any alternatives to that in Jitsi? Or is there any other
> way to
> traverse the ldap so that I can list contacts that are not part of my
> contact list?
>
> Thanks in advance!
>
> Best regards,
> Marin
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#6

Hi,

if you want to send an xmpp message, it needs to be to a contact from
the contact list.

Is this a limitation of the XMPP protocol or is it just how Jitsi is
implemented?
I think this will be a nice feature to have :slight_smile:

Best regards,
Marin

···

On Thu, Sep 18, 2014 at 5:24 PM, Damian Minkov <damencho@jitsi.org> wrote:

Hi,

if you want to send an xmpp message, it needs to be to a contact from
the contact list.

Regards
damencho

On Thu, Sep 18, 2014 at 5:18 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> > wrote:
> Hi again,
>
> Thanks Damencho, the LDAP works and I can successfully list contacts that
> are not part of my list. However, I can not send them any messages
unless I
> add them to my contact list first. Or is there any config that changes
this
> behaviour?
>
> Best regards,
> Marin
>
>
> On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> > > wrote:
>>
>> Hi,
>>
>> Just found out that if I log in Pidgin I also have this search service
>> available without configuring anything and I can search for contacts
that
>> are not in my list from Accounts->My account->Search for Users
>>
>> > you can configure ldap contact source in Options -> Advanced ->
>> > Contact Sources. And then it will search in ldap on every contact list
>>
>> Thanks! Although I still haven't managed to configure it successfully it
>> might be usefull :slight_smile:
>>
>> Best regards,
>> Marin
>>
>> On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov <damencho@jitsi.org> > wrote:
>>>
>>> Hi,
>>>
>>> you can configure ldap contact source in Options -> Advanced ->
>>> Contact Sources. And then it will search in ldap on every contact list
>>> search.
>>>
>>> Regards
>>> damencho
>>>
>>>
>>> On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov < > m.dzhigarov@gmail.com> > >>> wrote:
>>> > Hello devs,
>>> >
>>> > Our company is using a Spark IM setup for internal IM.
>>> >
>>> > Yesterday I tried to long in with Jitsi client and it seems to work
>>> > great
>>> > except I can't seem to find a Spark's "search service" alternative in
>>> > Jitsi.
>>> > It seems that my Spark client is connected to the company's internal
>>> > LDAP
>>> > server and the only thing that I have to configure from a user's
>>> > perspective
>>> > is the search service FQDN.
>>> >
>>> > So are there any alternatives to that in Jitsi? Or is there any other
>>> > way to
>>> > traverse the ldap so that I can list contacts that are not part of my
>>> > contact list?
>>> >
>>> > Thanks in advance!
>>> >
>>> > Best regards,
>>> > Marin
>>> >
>>> > _______________________________________________
>>> > dev mailing list
>>> > dev@jitsi.org
>>> > Unsubscribe instructions and other list options:
>>> > http://lists.jitsi.org/mailman/listinfo/dev
>>>
>>> _______________________________________________
>>> dev mailing list
>>> dev@jitsi.org
>>> Unsubscribe instructions and other list options:
>>> http://lists.jitsi.org/mailman/listinfo/dev
>>
>>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#7

Hi,

if you want to send an xmpp message, it needs to be to a contact from
the contact list.

Is this a limitation of the XMPP protocol or is it just how Jitsi is
implemented?
I think this will be a nice feature to have :slight_smile:

Agreed!

Obviously the XMPP server would need to allow for messages from/to
users without a subscription to go through.

In any case adding this to Jitsi would be trivial.

Emil

···

On Thu, Sep 18, 2014 at 4:30 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> wrote:

Best regards,
Marin

On Thu, Sep 18, 2014 at 5:24 PM, Damian Minkov <damencho@jitsi.org> wrote:

Hi,

if you want to send an xmpp message, it needs to be to a contact from
the contact list.

Regards
damencho

On Thu, Sep 18, 2014 at 5:18 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> >> wrote:
> Hi again,
>
> Thanks Damencho, the LDAP works and I can successfully list contacts
> that
> are not part of my list. However, I can not send them any messages
> unless I
> add them to my contact list first. Or is there any config that changes
> this
> behaviour?
>
> Best regards,
> Marin
>
>
> On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> >> > wrote:
>>
>> Hi,
>>
>> Just found out that if I log in Pidgin I also have this search service
>> available without configuring anything and I can search for contacts
>> that
>> are not in my list from Accounts->My account->Search for Users
>>
>> > you can configure ldap contact source in Options -> Advanced ->
>> > Contact Sources. And then it will search in ldap on every contact
>> > list
>>
>> Thanks! Although I still haven't managed to configure it successfully
>> it
>> might be usefull :slight_smile:
>>
>> Best regards,
>> Marin
>>
>> On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov <damencho@jitsi.org> >> >> wrote:
>>>
>>> Hi,
>>>
>>> you can configure ldap contact source in Options -> Advanced ->
>>> Contact Sources. And then it will search in ldap on every contact list
>>> search.
>>>
>>> Regards
>>> damencho
>>>
>>>
>>> On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov >> >>> <m.dzhigarov@gmail.com> >> >>> wrote:
>>> > Hello devs,
>>> >
>>> > Our company is using a Spark IM setup for internal IM.
>>> >
>>> > Yesterday I tried to long in with Jitsi client and it seems to work
>>> > great
>>> > except I can't seem to find a Spark's "search service" alternative
>>> > in
>>> > Jitsi.
>>> > It seems that my Spark client is connected to the company's internal
>>> > LDAP
>>> > server and the only thing that I have to configure from a user's
>>> > perspective
>>> > is the search service FQDN.
>>> >
>>> > So are there any alternatives to that in Jitsi? Or is there any
>>> > other
>>> > way to
>>> > traverse the ldap so that I can list contacts that are not part of
>>> > my
>>> > contact list?
>>> >
>>> > Thanks in advance!
>>> >
>>> > Best regards,
>>> > Marin
>>> >
>>> > _______________________________________________
>>> > dev mailing list
>>> > dev@jitsi.org
>>> > Unsubscribe instructions and other list options:
>>> > http://lists.jitsi.org/mailman/listinfo/dev
>>>
>>> _______________________________________________
>>> dev mailing list
>>> dev@jitsi.org
>>> Unsubscribe instructions and other list options:
>>> http://lists.jitsi.org/mailman/listinfo/dev
>>
>>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

--
https://jitsi.org


#8

Hi Marin,

Jitsi supports search service. It is disabled by default. To enable it you must set USER_SEARCH_ENABLED account configuration property in the Jitsi config file to true. Another account property that may be useful is USER_SEARCH_SERVICE_NAME property that stores the name of the search service. If this property is not set Jitsi will try to discover the search service for this account.

Jitsi user interface for the search service is different than the one implemented in Spark since we don’t have separate search form. In Jitsi it is implemented as separate contact source and when you search for contacts from the search field the contacts from the search service will appear.

Regards,
Hristo.

···

On Sep 18, 2014, at 5:30 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> wrote:

Hi,

> if you want to send an xmpp message, it needs to be to a contact from
> the contact list.

Is this a limitation of the XMPP protocol or is it just how Jitsi is implemented?
I think this will be a nice feature to have :slight_smile:

Best regards,
Marin

On Thu, Sep 18, 2014 at 5:24 PM, Damian Minkov <damencho@jitsi.org> wrote:
Hi,

if you want to send an xmpp message, it needs to be to a contact from
the contact list.

Regards
damencho

On Thu, Sep 18, 2014 at 5:18 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> wrote:
> Hi again,
>
> Thanks Damencho, the LDAP works and I can successfully list contacts that
> are not part of my list. However, I can not send them any messages unless I
> add them to my contact list first. Or is there any config that changes this
> behaviour?
>
> Best regards,
> Marin
>
>
> On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> > > wrote:
>>
>> Hi,
>>
>> Just found out that if I log in Pidgin I also have this search service
>> available without configuring anything and I can search for contacts that
>> are not in my list from Accounts->My account->Search for Users
>>
>> > you can configure ldap contact source in Options -> Advanced ->
>> > Contact Sources. And then it will search in ldap on every contact list
>>
>> Thanks! Although I still haven't managed to configure it successfully it
>> might be usefull :slight_smile:
>>
>> Best regards,
>> Marin
>>
>> On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov <damencho@jitsi.org> wrote:
>>>
>>> Hi,
>>>
>>> you can configure ldap contact source in Options -> Advanced ->
>>> Contact Sources. And then it will search in ldap on every contact list
>>> search.
>>>
>>> Regards
>>> damencho
>>>
>>>
>>> On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> > >>> wrote:
>>> > Hello devs,
>>> >
>>> > Our company is using a Spark IM setup for internal IM.
>>> >
>>> > Yesterday I tried to long in with Jitsi client and it seems to work
>>> > great
>>> > except I can't seem to find a Spark's "search service" alternative in
>>> > Jitsi.
>>> > It seems that my Spark client is connected to the company's internal
>>> > LDAP
>>> > server and the only thing that I have to configure from a user's
>>> > perspective
>>> > is the search service FQDN.
>>> >
>>> > So are there any alternatives to that in Jitsi? Or is there any other
>>> > way to
>>> > traverse the ldap so that I can list contacts that are not part of my
>>> > contact list?
>>> >
>>> > Thanks in advance!
>>> >
>>> > Best regards,
>>> > Marin
>>> >
>>> > _______________________________________________
>>> > dev mailing list
>>> > dev@jitsi.org
>>> > Unsubscribe instructions and other list options:
>>> > http://lists.jitsi.org/mailman/listinfo/dev
>>>
>>> _______________________________________________
>>> dev mailing list
>>> dev@jitsi.org
>>> Unsubscribe instructions and other list options:
>>> http://lists.jitsi.org/mailman/listinfo/dev
>>
>>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#9

Hi,

To enable it you must set USER_SEARCH_ENABLED account configuration

property in the Jitsi config file to true.
I have never done that. Is this the correct form?
net.java.sip.communicator.impl.protocol.jabber.acc<myAccNumber>.USER_SEARCH_ENABLED
of the property key? (considering we are talking about jabber protocol)

Best regards,
Marin

···

On Thu, Sep 18, 2014 at 6:38 PM, Emil Ivov <emcho@jitsi.org> wrote:

On Thu, Sep 18, 2014 at 4:30 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> > wrote:
> Hi,
>
>> if you want to send an xmpp message, it needs to be to a contact from
>> the contact list.
>
> Is this a limitation of the XMPP protocol or is it just how Jitsi is
> implemented?
> I think this will be a nice feature to have :slight_smile:

Agreed!

Obviously the XMPP server would need to allow for messages from/to
users without a subscription to go through.

In any case adding this to Jitsi would be trivial.

Emil

>
> Best regards,
> Marin
>
> On Thu, Sep 18, 2014 at 5:24 PM, Damian Minkov <damencho@jitsi.org> > wrote:
>>
>> Hi,
>>
>> if you want to send an xmpp message, it needs to be to a contact from
>> the contact list.
>>
>> Regards
>> damencho
>>
>>
>> On Thu, Sep 18, 2014 at 5:18 PM, Marin Dzhigarov <m.dzhigarov@gmail.com > > > >> wrote:
>> > Hi again,
>> >
>> > Thanks Damencho, the LDAP works and I can successfully list contacts
>> > that
>> > are not part of my list. However, I can not send them any messages
>> > unless I
>> > add them to my contact list first. Or is there any config that changes
>> > this
>> > behaviour?
>> >
>> > Best regards,
>> > Marin
>> >
>> >
>> > On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov < > m.dzhigarov@gmail.com> > >> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> Just found out that if I log in Pidgin I also have this search
service
>> >> available without configuring anything and I can search for contacts
>> >> that
>> >> are not in my list from Accounts->My account->Search for Users
>> >>
>> >> > you can configure ldap contact source in Options -> Advanced ->
>> >> > Contact Sources. And then it will search in ldap on every contact
>> >> > list
>> >>
>> >> Thanks! Although I still haven't managed to configure it successfully
>> >> it
>> >> might be usefull :slight_smile:
>> >>
>> >> Best regards,
>> >> Marin
>> >>
>> >> On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov <damencho@jitsi.org> > >> >> wrote:
>> >>>
>> >>> Hi,
>> >>>
>> >>> you can configure ldap contact source in Options -> Advanced ->
>> >>> Contact Sources. And then it will search in ldap on every contact
list
>> >>> search.
>> >>>
>> >>> Regards
>> >>> damencho
>> >>>
>> >>>
>> >>> On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov > >> >>> <m.dzhigarov@gmail.com> > >> >>> wrote:
>> >>> > Hello devs,
>> >>> >
>> >>> > Our company is using a Spark IM setup for internal IM.
>> >>> >
>> >>> > Yesterday I tried to long in with Jitsi client and it seems to
work
>> >>> > great
>> >>> > except I can't seem to find a Spark's "search service" alternative
>> >>> > in
>> >>> > Jitsi.
>> >>> > It seems that my Spark client is connected to the company's
internal
>> >>> > LDAP
>> >>> > server and the only thing that I have to configure from a user's
>> >>> > perspective
>> >>> > is the search service FQDN.
>> >>> >
>> >>> > So are there any alternatives to that in Jitsi? Or is there any
>> >>> > other
>> >>> > way to
>> >>> > traverse the ldap so that I can list contacts that are not part of
>> >>> > my
>> >>> > contact list?
>> >>> >
>> >>> > Thanks in advance!
>> >>> >
>> >>> > Best regards,
>> >>> > Marin
>> >>> >
>> >>> > _______________________________________________
>> >>> > dev mailing list
>> >>> > dev@jitsi.org
>> >>> > Unsubscribe instructions and other list options:
>> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>>
>> >>> _______________________________________________
>> >>> dev mailing list
>> >>> dev@jitsi.org
>> >>> Unsubscribe instructions and other list options:
>> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

--
https://jitsi.org

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#10

Hello,

Is anyone currently working on this feature? I would be glad to help but
I'm not very familiar with that part of the code.
So from a quick look in the sources it seems that one simply needs to add a
new "send message" button in the SourceContactRightClickMenu and
TreeContactList and make the impl.gui.main.chat.ChatWindowManager work with
SourceContact instead of just MetaContact.

If indeed this is all the work then I will try to do it over the weekends.

Best regards,
Marin

···

On Thu, Sep 18, 2014 at 6:38 PM, Emil Ivov <emcho@jitsi.org> wrote:

On Thu, Sep 18, 2014 at 4:30 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> > wrote:
> Hi,
>
>> if you want to send an xmpp message, it needs to be to a contact from
>> the contact list.
>
> Is this a limitation of the XMPP protocol or is it just how Jitsi is
> implemented?
> I think this will be a nice feature to have :slight_smile:

Agreed!

Obviously the XMPP server would need to allow for messages from/to
users without a subscription to go through.

In any case adding this to Jitsi would be trivial.

Emil

>
> Best regards,
> Marin
>
> On Thu, Sep 18, 2014 at 5:24 PM, Damian Minkov <damencho@jitsi.org> > wrote:
>>
>> Hi,
>>
>> if you want to send an xmpp message, it needs to be to a contact from
>> the contact list.
>>
>> Regards
>> damencho
>>
>>
>> On Thu, Sep 18, 2014 at 5:18 PM, Marin Dzhigarov <m.dzhigarov@gmail.com > > > >> wrote:
>> > Hi again,
>> >
>> > Thanks Damencho, the LDAP works and I can successfully list contacts
>> > that
>> > are not part of my list. However, I can not send them any messages
>> > unless I
>> > add them to my contact list first. Or is there any config that changes
>> > this
>> > behaviour?
>> >
>> > Best regards,
>> > Marin
>> >
>> >
>> > On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov < > m.dzhigarov@gmail.com> > >> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> Just found out that if I log in Pidgin I also have this search
service
>> >> available without configuring anything and I can search for contacts
>> >> that
>> >> are not in my list from Accounts->My account->Search for Users
>> >>
>> >> > you can configure ldap contact source in Options -> Advanced ->
>> >> > Contact Sources. And then it will search in ldap on every contact
>> >> > list
>> >>
>> >> Thanks! Although I still haven't managed to configure it successfully
>> >> it
>> >> might be usefull :slight_smile:
>> >>
>> >> Best regards,
>> >> Marin
>> >>
>> >> On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov <damencho@jitsi.org> > >> >> wrote:
>> >>>
>> >>> Hi,
>> >>>
>> >>> you can configure ldap contact source in Options -> Advanced ->
>> >>> Contact Sources. And then it will search in ldap on every contact
list
>> >>> search.
>> >>>
>> >>> Regards
>> >>> damencho
>> >>>
>> >>>
>> >>> On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov > >> >>> <m.dzhigarov@gmail.com> > >> >>> wrote:
>> >>> > Hello devs,
>> >>> >
>> >>> > Our company is using a Spark IM setup for internal IM.
>> >>> >
>> >>> > Yesterday I tried to long in with Jitsi client and it seems to
work
>> >>> > great
>> >>> > except I can't seem to find a Spark's "search service" alternative
>> >>> > in
>> >>> > Jitsi.
>> >>> > It seems that my Spark client is connected to the company's
internal
>> >>> > LDAP
>> >>> > server and the only thing that I have to configure from a user's
>> >>> > perspective
>> >>> > is the search service FQDN.
>> >>> >
>> >>> > So are there any alternatives to that in Jitsi? Or is there any
>> >>> > other
>> >>> > way to
>> >>> > traverse the ldap so that I can list contacts that are not part of
>> >>> > my
>> >>> > contact list?
>> >>> >
>> >>> > Thanks in advance!
>> >>> >
>> >>> > Best regards,
>> >>> > Marin
>> >>> >
>> >>> > _______________________________________________
>> >>> > dev mailing list
>> >>> > dev@jitsi.org
>> >>> > Unsubscribe instructions and other list options:
>> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>>
>> >>> _______________________________________________
>> >>> dev mailing list
>> >>> dev@jitsi.org
>> >>> Unsubscribe instructions and other list options:
>> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

--
https://jitsi.org

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#11

HI,

Hi,

> To enable it you must set USER_SEARCH_ENABLED account configuration property in the Jitsi config file to true.
I have never done that. Is this the correct form?
net.java.sip.communicator.impl.protocol.jabber.acc<myAccNumber>.USER_SEARCH_ENABLED of the property key? (considering we are talking about jabber protocol)

Yes. This is the correct form.

···

On Sep 19, 2014, at 6:03 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> wrote:

Best regards,
Marin

On Thu, Sep 18, 2014 at 6:38 PM, Emil Ivov <emcho@jitsi.org> wrote:
On Thu, Sep 18, 2014 at 4:30 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> wrote:
> Hi,
>
>> if you want to send an xmpp message, it needs to be to a contact from
>> the contact list.
>
> Is this a limitation of the XMPP protocol or is it just how Jitsi is
> implemented?
> I think this will be a nice feature to have :slight_smile:

Agreed!

Obviously the XMPP server would need to allow for messages from/to
users without a subscription to go through.

In any case adding this to Jitsi would be trivial.

Emil

>
> Best regards,
> Marin
>
> On Thu, Sep 18, 2014 at 5:24 PM, Damian Minkov <damencho@jitsi.org> wrote:
>>
>> Hi,
>>
>> if you want to send an xmpp message, it needs to be to a contact from
>> the contact list.
>>
>> Regards
>> damencho
>>
>>
>> On Thu, Sep 18, 2014 at 5:18 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> > >> wrote:
>> > Hi again,
>> >
>> > Thanks Damencho, the LDAP works and I can successfully list contacts
>> > that
>> > are not part of my list. However, I can not send them any messages
>> > unless I
>> > add them to my contact list first. Or is there any config that changes
>> > this
>> > behaviour?
>> >
>> > Best regards,
>> > Marin
>> >
>> >
>> > On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> > >> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> Just found out that if I log in Pidgin I also have this search service
>> >> available without configuring anything and I can search for contacts
>> >> that
>> >> are not in my list from Accounts->My account->Search for Users
>> >>
>> >> > you can configure ldap contact source in Options -> Advanced ->
>> >> > Contact Sources. And then it will search in ldap on every contact
>> >> > list
>> >>
>> >> Thanks! Although I still haven't managed to configure it successfully
>> >> it
>> >> might be usefull :slight_smile:
>> >>
>> >> Best regards,
>> >> Marin
>> >>
>> >> On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov <damencho@jitsi.org> > >> >> wrote:
>> >>>
>> >>> Hi,
>> >>>
>> >>> you can configure ldap contact source in Options -> Advanced ->
>> >>> Contact Sources. And then it will search in ldap on every contact list
>> >>> search.
>> >>>
>> >>> Regards
>> >>> damencho
>> >>>
>> >>>
>> >>> On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov > >> >>> <m.dzhigarov@gmail.com> > >> >>> wrote:
>> >>> > Hello devs,
>> >>> >
>> >>> > Our company is using a Spark IM setup for internal IM.
>> >>> >
>> >>> > Yesterday I tried to long in with Jitsi client and it seems to work
>> >>> > great
>> >>> > except I can't seem to find a Spark's "search service" alternative
>> >>> > in
>> >>> > Jitsi.
>> >>> > It seems that my Spark client is connected to the company's internal
>> >>> > LDAP
>> >>> > server and the only thing that I have to configure from a user's
>> >>> > perspective
>> >>> > is the search service FQDN.
>> >>> >
>> >>> > So are there any alternatives to that in Jitsi? Or is there any
>> >>> > other
>> >>> > way to
>> >>> > traverse the ldap so that I can list contacts that are not part of
>> >>> > my
>> >>> > contact list?
>> >>> >
>> >>> > Thanks in advance!
>> >>> >
>> >>> > Best regards,
>> >>> > Marin
>> >>> >
>> >>> > _______________________________________________
>> >>> > dev mailing list
>> >>> > dev@jitsi.org
>> >>> > Unsubscribe instructions and other list options:
>> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>>
>> >>> _______________________________________________
>> >>> dev mailing list
>> >>> dev@jitsi.org
>> >>> Unsubscribe instructions and other list options:
>> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

--
https://jitsi.org

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#12

Yes, that's about it. You might also need to tweak the basic IM op set
in Jabber to allow for outgoing messages to non-contacts.

I don't believe anyone else is currently working on this.

Cheers,
Emil

--sent from my mobile

···

On Wed, Sep 24, 2014 at 7:55 AM, Marin Dzhigarov <m.dzhigarov@gmail.com> wrote:

Hello,

Is anyone currently working on this feature? I would be glad to help but I'm
not very familiar with that part of the code.
So from a quick look in the sources it seems that one simply needs to add a
new "send message" button in the SourceContactRightClickMenu and
TreeContactList and make the impl.gui.main.chat.ChatWindowManager work with
SourceContact instead of just MetaContact.

If indeed this is all the work then I will try to do it over the weekends.

Best regards,
Marin

On Thu, Sep 18, 2014 at 6:38 PM, Emil Ivov <emcho@jitsi.org> wrote:

On Thu, Sep 18, 2014 at 4:30 PM, Marin Dzhigarov <m.dzhigarov@gmail.com> >> wrote:
> Hi,
>
>> if you want to send an xmpp message, it needs to be to a contact from
>> the contact list.
>
> Is this a limitation of the XMPP protocol or is it just how Jitsi is
> implemented?
> I think this will be a nice feature to have :slight_smile:

Agreed!

Obviously the XMPP server would need to allow for messages from/to
users without a subscription to go through.

In any case adding this to Jitsi would be trivial.

Emil

>
> Best regards,
> Marin
>
> On Thu, Sep 18, 2014 at 5:24 PM, Damian Minkov <damencho@jitsi.org> >> > wrote:
>>
>> Hi,
>>
>> if you want to send an xmpp message, it needs to be to a contact from
>> the contact list.
>>
>> Regards
>> damencho
>>
>>
>> On Thu, Sep 18, 2014 at 5:18 PM, Marin Dzhigarov >> >> <m.dzhigarov@gmail.com> >> >> wrote:
>> > Hi again,
>> >
>> > Thanks Damencho, the LDAP works and I can successfully list contacts
>> > that
>> > are not part of my list. However, I can not send them any messages
>> > unless I
>> > add them to my contact list first. Or is there any config that
>> > changes
>> > this
>> > behaviour?
>> >
>> > Best regards,
>> > Marin
>> >
>> >
>> > On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov >> >> > <m.dzhigarov@gmail.com> >> >> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> Just found out that if I log in Pidgin I also have this search
>> >> service
>> >> available without configuring anything and I can search for contacts
>> >> that
>> >> are not in my list from Accounts->My account->Search for Users
>> >>
>> >> > you can configure ldap contact source in Options -> Advanced ->
>> >> > Contact Sources. And then it will search in ldap on every contact
>> >> > list
>> >>
>> >> Thanks! Although I still haven't managed to configure it
>> >> successfully
>> >> it
>> >> might be usefull :slight_smile:
>> >>
>> >> Best regards,
>> >> Marin
>> >>
>> >> On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov <damencho@jitsi.org> >> >> >> wrote:
>> >>>
>> >>> Hi,
>> >>>
>> >>> you can configure ldap contact source in Options -> Advanced ->
>> >>> Contact Sources. And then it will search in ldap on every contact
>> >>> list
>> >>> search.
>> >>>
>> >>> Regards
>> >>> damencho
>> >>>
>> >>>
>> >>> On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov >> >> >>> <m.dzhigarov@gmail.com> >> >> >>> wrote:
>> >>> > Hello devs,
>> >>> >
>> >>> > Our company is using a Spark IM setup for internal IM.
>> >>> >
>> >>> > Yesterday I tried to long in with Jitsi client and it seems to
>> >>> > work
>> >>> > great
>> >>> > except I can't seem to find a Spark's "search service"
>> >>> > alternative
>> >>> > in
>> >>> > Jitsi.
>> >>> > It seems that my Spark client is connected to the company's
>> >>> > internal
>> >>> > LDAP
>> >>> > server and the only thing that I have to configure from a user's
>> >>> > perspective
>> >>> > is the search service FQDN.
>> >>> >
>> >>> > So are there any alternatives to that in Jitsi? Or is there any
>> >>> > other
>> >>> > way to
>> >>> > traverse the ldap so that I can list contacts that are not part
>> >>> > of
>> >>> > my
>> >>> > contact list?
>> >>> >
>> >>> > Thanks in advance!
>> >>> >
>> >>> > Best regards,
>> >>> > Marin
>> >>> >
>> >>> > _______________________________________________
>> >>> > dev mailing list
>> >>> > dev@jitsi.org
>> >>> > Unsubscribe instructions and other list options:
>> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>>
>> >>> _______________________________________________
>> >>> dev mailing list
>> >>> dev@jitsi.org
>> >>> Unsubscribe instructions and other list options:
>> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

--
https://jitsi.org

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

--
https://jitsi.org


#13

You might also need to tweak the basic IM op set
in Jabber to allow for outgoing messages to non-contacts.

Why is that? As fas as I remember the IM op set works with the Contact
interface. So we can create an "unresolved Contact" with the op set
presense and then use this Contact to send the message to. We only need a
valid jid to be set in the Contact.

Best regards,
Marin

···

On Wed, Sep 24, 2014 at 9:14 AM, Emil Ivov <emcho@jitsi.org> wrote:

Yes, that's about it. You might also need to tweak the basic IM op set
in Jabber to allow for outgoing messages to non-contacts.

I don't believe anyone else is currently working on this.

Cheers,
Emil

--sent from my mobile

On Wed, Sep 24, 2014 at 7:55 AM, Marin Dzhigarov <m.dzhigarov@gmail.com> > wrote:
> Hello,
>
> Is anyone currently working on this feature? I would be glad to help but
I'm
> not very familiar with that part of the code.
> So from a quick look in the sources it seems that one simply needs to
add a
> new "send message" button in the SourceContactRightClickMenu and
> TreeContactList and make the impl.gui.main.chat.ChatWindowManager work
with
> SourceContact instead of just MetaContact.
>
> If indeed this is all the work then I will try to do it over the
weekends.
>
> Best regards,
> Marin
>
> On Thu, Sep 18, 2014 at 6:38 PM, Emil Ivov <emcho@jitsi.org> wrote:
>>
>> On Thu, Sep 18, 2014 at 4:30 PM, Marin Dzhigarov <m.dzhigarov@gmail.com > > > >> wrote:
>> > Hi,
>> >
>> >> if you want to send an xmpp message, it needs to be to a contact from
>> >> the contact list.
>> >
>> > Is this a limitation of the XMPP protocol or is it just how Jitsi is
>> > implemented?
>> > I think this will be a nice feature to have :slight_smile:
>>
>> Agreed!
>>
>> Obviously the XMPP server would need to allow for messages from/to
>> users without a subscription to go through.
>>
>> In any case adding this to Jitsi would be trivial.
>>
>> Emil
>>
>> >
>> > Best regards,
>> > Marin
>> >
>> > On Thu, Sep 18, 2014 at 5:24 PM, Damian Minkov <damencho@jitsi.org> > >> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> if you want to send an xmpp message, it needs to be to a contact from
>> >> the contact list.
>> >>
>> >> Regards
>> >> damencho
>> >>
>> >>
>> >> On Thu, Sep 18, 2014 at 5:18 PM, Marin Dzhigarov > >> >> <m.dzhigarov@gmail.com> > >> >> wrote:
>> >> > Hi again,
>> >> >
>> >> > Thanks Damencho, the LDAP works and I can successfully list
contacts
>> >> > that
>> >> > are not part of my list. However, I can not send them any messages
>> >> > unless I
>> >> > add them to my contact list first. Or is there any config that
>> >> > changes
>> >> > this
>> >> > behaviour?
>> >> >
>> >> > Best regards,
>> >> > Marin
>> >> >
>> >> >
>> >> > On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov > >> >> > <m.dzhigarov@gmail.com> > >> >> > wrote:
>> >> >>
>> >> >> Hi,
>> >> >>
>> >> >> Just found out that if I log in Pidgin I also have this search
>> >> >> service
>> >> >> available without configuring anything and I can search for
contacts
>> >> >> that
>> >> >> are not in my list from Accounts->My account->Search for Users
>> >> >>
>> >> >> > you can configure ldap contact source in Options -> Advanced ->
>> >> >> > Contact Sources. And then it will search in ldap on every
contact
>> >> >> > list
>> >> >>
>> >> >> Thanks! Although I still haven't managed to configure it
>> >> >> successfully
>> >> >> it
>> >> >> might be usefull :slight_smile:
>> >> >>
>> >> >> Best regards,
>> >> >> Marin
>> >> >>
>> >> >> On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov < > damencho@jitsi.org> > >> >> >> wrote:
>> >> >>>
>> >> >>> Hi,
>> >> >>>
>> >> >>> you can configure ldap contact source in Options -> Advanced ->
>> >> >>> Contact Sources. And then it will search in ldap on every contact
>> >> >>> list
>> >> >>> search.
>> >> >>>
>> >> >>> Regards
>> >> >>> damencho
>> >> >>>
>> >> >>>
>> >> >>> On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov > >> >> >>> <m.dzhigarov@gmail.com> > >> >> >>> wrote:
>> >> >>> > Hello devs,
>> >> >>> >
>> >> >>> > Our company is using a Spark IM setup for internal IM.
>> >> >>> >
>> >> >>> > Yesterday I tried to long in with Jitsi client and it seems to
>> >> >>> > work
>> >> >>> > great
>> >> >>> > except I can't seem to find a Spark's "search service"
>> >> >>> > alternative
>> >> >>> > in
>> >> >>> > Jitsi.
>> >> >>> > It seems that my Spark client is connected to the company's
>> >> >>> > internal
>> >> >>> > LDAP
>> >> >>> > server and the only thing that I have to configure from a
user's
>> >> >>> > perspective
>> >> >>> > is the search service FQDN.
>> >> >>> >
>> >> >>> > So are there any alternatives to that in Jitsi? Or is there any
>> >> >>> > other
>> >> >>> > way to
>> >> >>> > traverse the ldap so that I can list contacts that are not part
>> >> >>> > of
>> >> >>> > my
>> >> >>> > contact list?
>> >> >>> >
>> >> >>> > Thanks in advance!
>> >> >>> >
>> >> >>> > Best regards,
>> >> >>> > Marin
>> >> >>> >
>> >> >>> > _______________________________________________
>> >> >>> > dev mailing list
>> >> >>> > dev@jitsi.org
>> >> >>> > Unsubscribe instructions and other list options:
>> >> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >> >>>
>> >> >>> _______________________________________________
>> >> >>> dev mailing list
>> >> >>> dev@jitsi.org
>> >> >>> Unsubscribe instructions and other list options:
>> >> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > dev mailing list
>> >> > dev@jitsi.org
>> >> > Unsubscribe instructions and other list options:
>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >> _______________________________________________
>> >> dev mailing list
>> >> dev@jitsi.org
>> >> Unsubscribe instructions and other list options:
>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>>
>>
>> --
>> https://jitsi.org
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

--
https://jitsi.org

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#14

Yes sure. I simply meant that you'd have to deal with the fact that you'll
need a contact and you'll have a string (or a source contact)

--sent from my mobile

···

On 24 Sep 2014 8:56 AM, "Marin Dzhigarov" <m.dzhigarov@gmail.com> wrote:

> You might also need to tweak the basic IM op set
> in Jabber to allow for outgoing messages to non-contacts.

Why is that? As fas as I remember the IM op set works with the Contact
interface. So we can create an "unresolved Contact" with the op set
presense and then use this Contact to send the message to. We only need a
valid jid to be set in the Contact.

Best regards,
Marin

On Wed, Sep 24, 2014 at 9:14 AM, Emil Ivov <emcho@jitsi.org> wrote:

Yes, that's about it. You might also need to tweak the basic IM op set
in Jabber to allow for outgoing messages to non-contacts.

I don't believe anyone else is currently working on this.

Cheers,
Emil

--sent from my mobile

On Wed, Sep 24, 2014 at 7:55 AM, Marin Dzhigarov <m.dzhigarov@gmail.com> >> wrote:
> Hello,
>
> Is anyone currently working on this feature? I would be glad to help
but I'm
> not very familiar with that part of the code.
> So from a quick look in the sources it seems that one simply needs to
add a
> new "send message" button in the SourceContactRightClickMenu and
> TreeContactList and make the impl.gui.main.chat.ChatWindowManager work
with
> SourceContact instead of just MetaContact.
>
> If indeed this is all the work then I will try to do it over the
weekends.
>
> Best regards,
> Marin
>
> On Thu, Sep 18, 2014 at 6:38 PM, Emil Ivov <emcho@jitsi.org> wrote:
>>
>> On Thu, Sep 18, 2014 at 4:30 PM, Marin Dzhigarov < >> m.dzhigarov@gmail.com> >> >> wrote:
>> > Hi,
>> >
>> >> if you want to send an xmpp message, it needs to be to a contact
from
>> >> the contact list.
>> >
>> > Is this a limitation of the XMPP protocol or is it just how Jitsi is
>> > implemented?
>> > I think this will be a nice feature to have :slight_smile:
>>
>> Agreed!
>>
>> Obviously the XMPP server would need to allow for messages from/to
>> users without a subscription to go through.
>>
>> In any case adding this to Jitsi would be trivial.
>>
>> Emil
>>
>> >
>> > Best regards,
>> > Marin
>> >
>> > On Thu, Sep 18, 2014 at 5:24 PM, Damian Minkov <damencho@jitsi.org> >> >> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> if you want to send an xmpp message, it needs to be to a contact
from
>> >> the contact list.
>> >>
>> >> Regards
>> >> damencho
>> >>
>> >>
>> >> On Thu, Sep 18, 2014 at 5:18 PM, Marin Dzhigarov >> >> >> <m.dzhigarov@gmail.com> >> >> >> wrote:
>> >> > Hi again,
>> >> >
>> >> > Thanks Damencho, the LDAP works and I can successfully list
contacts
>> >> > that
>> >> > are not part of my list. However, I can not send them any messages
>> >> > unless I
>> >> > add them to my contact list first. Or is there any config that
>> >> > changes
>> >> > this
>> >> > behaviour?
>> >> >
>> >> > Best regards,
>> >> > Marin
>> >> >
>> >> >
>> >> > On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov >> >> >> > <m.dzhigarov@gmail.com> >> >> >> > wrote:
>> >> >>
>> >> >> Hi,
>> >> >>
>> >> >> Just found out that if I log in Pidgin I also have this search
>> >> >> service
>> >> >> available without configuring anything and I can search for
contacts
>> >> >> that
>> >> >> are not in my list from Accounts->My account->Search for Users
>> >> >>
>> >> >> > you can configure ldap contact source in Options -> Advanced ->
>> >> >> > Contact Sources. And then it will search in ldap on every
contact
>> >> >> > list
>> >> >>
>> >> >> Thanks! Although I still haven't managed to configure it
>> >> >> successfully
>> >> >> it
>> >> >> might be usefull :slight_smile:
>> >> >>
>> >> >> Best regards,
>> >> >> Marin
>> >> >>
>> >> >> On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov < >> damencho@jitsi.org> >> >> >> >> wrote:
>> >> >>>
>> >> >>> Hi,
>> >> >>>
>> >> >>> you can configure ldap contact source in Options -> Advanced ->
>> >> >>> Contact Sources. And then it will search in ldap on every
contact
>> >> >>> list
>> >> >>> search.
>> >> >>>
>> >> >>> Regards
>> >> >>> damencho
>> >> >>>
>> >> >>>
>> >> >>> On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov >> >> >> >>> <m.dzhigarov@gmail.com> >> >> >> >>> wrote:
>> >> >>> > Hello devs,
>> >> >>> >
>> >> >>> > Our company is using a Spark IM setup for internal IM.
>> >> >>> >
>> >> >>> > Yesterday I tried to long in with Jitsi client and it seems to
>> >> >>> > work
>> >> >>> > great
>> >> >>> > except I can't seem to find a Spark's "search service"
>> >> >>> > alternative
>> >> >>> > in
>> >> >>> > Jitsi.
>> >> >>> > It seems that my Spark client is connected to the company's
>> >> >>> > internal
>> >> >>> > LDAP
>> >> >>> > server and the only thing that I have to configure from a
user's
>> >> >>> > perspective
>> >> >>> > is the search service FQDN.
>> >> >>> >
>> >> >>> > So are there any alternatives to that in Jitsi? Or is there
any
>> >> >>> > other
>> >> >>> > way to
>> >> >>> > traverse the ldap so that I can list contacts that are not
part
>> >> >>> > of
>> >> >>> > my
>> >> >>> > contact list?
>> >> >>> >
>> >> >>> > Thanks in advance!
>> >> >>> >
>> >> >>> > Best regards,
>> >> >>> > Marin
>> >> >>> >
>> >> >>> > _______________________________________________
>> >> >>> > dev mailing list
>> >> >>> > dev@jitsi.org
>> >> >>> > Unsubscribe instructions and other list options:
>> >> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >> >>>
>> >> >>> _______________________________________________
>> >> >>> dev mailing list
>> >> >>> dev@jitsi.org
>> >> >>> Unsubscribe instructions and other list options:
>> >> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > dev mailing list
>> >> > dev@jitsi.org
>> >> > Unsubscribe instructions and other list options:
>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >> _______________________________________________
>> >> dev mailing list
>> >> dev@jitsi.org
>> >> Unsubscribe instructions and other list options:
>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>>
>>
>> --
>> https://jitsi.org
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

--
https://jitsi.org

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#15

Hello,

Changes are commited in master:
6a23358a8d280aaeba42e6ee82e5740973a2499f

If you notice any problems with this feature please contact me.

Best regards,
Marin

···

On Wed, Sep 24, 2014 at 10:00 AM, Emil Ivov <emcho@jitsi.org> wrote:

Yes sure. I simply meant that you'd have to deal with the fact that you'll
need a contact and you'll have a string (or a source contact)

--sent from my mobile
On 24 Sep 2014 8:56 AM, "Marin Dzhigarov" <m.dzhigarov@gmail.com> wrote:

> You might also need to tweak the basic IM op set
> in Jabber to allow for outgoing messages to non-contacts.

Why is that? As fas as I remember the IM op set works with the Contact
interface. So we can create an "unresolved Contact" with the op set
presense and then use this Contact to send the message to. We only need a
valid jid to be set in the Contact.

Best regards,
Marin

On Wed, Sep 24, 2014 at 9:14 AM, Emil Ivov <emcho@jitsi.org> wrote:

Yes, that's about it. You might also need to tweak the basic IM op set
in Jabber to allow for outgoing messages to non-contacts.

I don't believe anyone else is currently working on this.

Cheers,
Emil

--sent from my mobile

On Wed, Sep 24, 2014 at 7:55 AM, Marin Dzhigarov <m.dzhigarov@gmail.com> >>> wrote:
> Hello,
>
> Is anyone currently working on this feature? I would be glad to help
but I'm
> not very familiar with that part of the code.
> So from a quick look in the sources it seems that one simply needs to
add a
> new "send message" button in the SourceContactRightClickMenu and
> TreeContactList and make the impl.gui.main.chat.ChatWindowManager work
with
> SourceContact instead of just MetaContact.
>
> If indeed this is all the work then I will try to do it over the
weekends.
>
> Best regards,
> Marin
>
> On Thu, Sep 18, 2014 at 6:38 PM, Emil Ivov <emcho@jitsi.org> wrote:
>>
>> On Thu, Sep 18, 2014 at 4:30 PM, Marin Dzhigarov < >>> m.dzhigarov@gmail.com> >>> >> wrote:
>> > Hi,
>> >
>> >> if you want to send an xmpp message, it needs to be to a contact
from
>> >> the contact list.
>> >
>> > Is this a limitation of the XMPP protocol or is it just how Jitsi is
>> > implemented?
>> > I think this will be a nice feature to have :slight_smile:
>>
>> Agreed!
>>
>> Obviously the XMPP server would need to allow for messages from/to
>> users without a subscription to go through.
>>
>> In any case adding this to Jitsi would be trivial.
>>
>> Emil
>>
>> >
>> > Best regards,
>> > Marin
>> >
>> > On Thu, Sep 18, 2014 at 5:24 PM, Damian Minkov <damencho@jitsi.org> >>> >> > wrote:
>> >>
>> >> Hi,
>> >>
>> >> if you want to send an xmpp message, it needs to be to a contact
from
>> >> the contact list.
>> >>
>> >> Regards
>> >> damencho
>> >>
>> >>
>> >> On Thu, Sep 18, 2014 at 5:18 PM, Marin Dzhigarov >>> >> >> <m.dzhigarov@gmail.com> >>> >> >> wrote:
>> >> > Hi again,
>> >> >
>> >> > Thanks Damencho, the LDAP works and I can successfully list
contacts
>> >> > that
>> >> > are not part of my list. However, I can not send them any
messages
>> >> > unless I
>> >> > add them to my contact list first. Or is there any config that
>> >> > changes
>> >> > this
>> >> > behaviour?
>> >> >
>> >> > Best regards,
>> >> > Marin
>> >> >
>> >> >
>> >> > On Thu, Sep 18, 2014 at 5:02 PM, Marin Dzhigarov >>> >> >> > <m.dzhigarov@gmail.com> >>> >> >> > wrote:
>> >> >>
>> >> >> Hi,
>> >> >>
>> >> >> Just found out that if I log in Pidgin I also have this search
>> >> >> service
>> >> >> available without configuring anything and I can search for
contacts
>> >> >> that
>> >> >> are not in my list from Accounts->My account->Search for Users
>> >> >>
>> >> >> > you can configure ldap contact source in Options -> Advanced
->
>> >> >> > Contact Sources. And then it will search in ldap on every
contact
>> >> >> > list
>> >> >>
>> >> >> Thanks! Although I still haven't managed to configure it
>> >> >> successfully
>> >> >> it
>> >> >> might be usefull :slight_smile:
>> >> >>
>> >> >> Best regards,
>> >> >> Marin
>> >> >>
>> >> >> On Thu, Sep 18, 2014 at 4:44 PM, Damian Minkov < >>> damencho@jitsi.org> >>> >> >> >> wrote:
>> >> >>>
>> >> >>> Hi,
>> >> >>>
>> >> >>> you can configure ldap contact source in Options -> Advanced ->
>> >> >>> Contact Sources. And then it will search in ldap on every
contact
>> >> >>> list
>> >> >>> search.
>> >> >>>
>> >> >>> Regards
>> >> >>> damencho
>> >> >>>
>> >> >>>
>> >> >>> On Thu, Sep 18, 2014 at 4:40 PM, Marin Dzhigarov >>> >> >> >>> <m.dzhigarov@gmail.com> >>> >> >> >>> wrote:
>> >> >>> > Hello devs,
>> >> >>> >
>> >> >>> > Our company is using a Spark IM setup for internal IM.
>> >> >>> >
>> >> >>> > Yesterday I tried to long in with Jitsi client and it seems
to
>> >> >>> > work
>> >> >>> > great
>> >> >>> > except I can't seem to find a Spark's "search service"
>> >> >>> > alternative
>> >> >>> > in
>> >> >>> > Jitsi.
>> >> >>> > It seems that my Spark client is connected to the company's
>> >> >>> > internal
>> >> >>> > LDAP
>> >> >>> > server and the only thing that I have to configure from a
user's
>> >> >>> > perspective
>> >> >>> > is the search service FQDN.
>> >> >>> >
>> >> >>> > So are there any alternatives to that in Jitsi? Or is there
any
>> >> >>> > other
>> >> >>> > way to
>> >> >>> > traverse the ldap so that I can list contacts that are not
part
>> >> >>> > of
>> >> >>> > my
>> >> >>> > contact list?
>> >> >>> >
>> >> >>> > Thanks in advance!
>> >> >>> >
>> >> >>> > Best regards,
>> >> >>> > Marin
>> >> >>> >
>> >> >>> > _______________________________________________
>> >> >>> > dev mailing list
>> >> >>> > dev@jitsi.org
>> >> >>> > Unsubscribe instructions and other list options:
>> >> >>> > http://lists.jitsi.org/mailman/listinfo/dev
>> >> >>>
>> >> >>> _______________________________________________
>> >> >>> dev mailing list
>> >> >>> dev@jitsi.org
>> >> >>> Unsubscribe instructions and other list options:
>> >> >>> http://lists.jitsi.org/mailman/listinfo/dev
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > dev mailing list
>> >> > dev@jitsi.org
>> >> > Unsubscribe instructions and other list options:
>> >> > http://lists.jitsi.org/mailman/listinfo/dev
>> >>
>> >> _______________________________________________
>> >> dev mailing list
>> >> dev@jitsi.org
>> >> Unsubscribe instructions and other list options:
>> >> http://lists.jitsi.org/mailman/listinfo/dev
>> >
>> >
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev@jitsi.org
>> > Unsubscribe instructions and other list options:
>> > http://lists.jitsi.org/mailman/listinfo/dev
>>
>>
>>
>> --
>> https://jitsi.org
>>
>> _______________________________________________
>> dev mailing list
>> dev@jitsi.org
>> Unsubscribe instructions and other list options:
>> http://lists.jitsi.org/mailman/listinfo/dev
>
>
>
> _______________________________________________
> dev mailing list
> dev@jitsi.org
> Unsubscribe instructions and other list options:
> http://lists.jitsi.org/mailman/listinfo/dev

--
https://jitsi.org

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev