[jitsi-dev] Conferences does not work from Internet


#1

Hi all!

As I commented in another message, I just did a Jitsi Meet installation
in an LXC container with Debian GNU/Linux.

Internally there seems to be no problem, but when someone from the
Internet creates a conference room and gives permission in the browser
to use microphone and camera, s/he get a message like the one shown in
the screenshot.

I have a proxy with Apache that redirects the connections to the server
where Jitsi Meet is installed. Maybe I'm missing something? I see in
Nginx that there is a BOSH configuration pointing to localhost. Should I
put the corresponding configuration in Apache so that it points to the
IP of the host with Jitsi Meet?

Thanks in advance.

Kind regards,
Daniel


#2

Hi Daniel,

Here’s a few things to try: 1. The JS console/JVB/Jicofo logs could be useful in troubleshooting the issue. 2. What do you see when you go to https://conf.opcion-libre.com.ar/http-bind? <https://conf.opcion-libre.com.ar/http-bind?> 3. Make sure you DNAT port 10000 to your LXC container.

I hope this helps.

Regards,
George

···

On Dec 29, 2016, at 6:08 PM, Daniel Bareiro <daniel-listas@gmx.net> wrote:

Hi all!

As I commented in another message, I just did a Jitsi Meet installation
in an LXC container with Debian GNU/Linux.

Internally there seems to be no problem, but when someone from the
Internet creates a conference room and gives permission in the browser
to use microphone and camera, s/he get a message like the one shown in
the screenshot.

I have a proxy with Apache that redirects the connections to the server
where Jitsi Meet is installed. Maybe I'm missing something? I see in
Nginx that there is a BOSH configuration pointing to localhost. Should I
put the corresponding configuration in Apache so that it points to the
IP of the host with Jitsi Meet?

Thanks in advance.

Kind regards,
Daniel
<JitsiMeetFromInternet.jpg>_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#3

Hi Daniel,

Hi, George. Thanks for your reply.

Here’s a few things to try:

1. The JS console/JVB/Jicofo logs could be useful in troubleshooting the issue.

I will check it.

2. What do you see when you go to https://conf.opcion-libre.com.ar/http-bind?

Without the "http-bind" I reach to the page of Jitsi Meet. But with the
"http-bind" I get a 404. The test from the local network, when pointing
to "http-bind", returns "It works! Now point your BOSH client to this
URL to connect to Prosody. For more information see Prosody: Setting up
BOSH".

3. Make sure you DNAT port 10000 to your LXC container.

Do you mean to 10000/udp? I currently have 10000-20000/udp redirected to
my Asterisk server. I only use Asterisk for audio calls. I thought this
port range was needed for audio with Asterisk. So I can not
simultaneously run Asterisk and Jitsi Meet?

Thanks for your time.

Kind regards,
Daniel

···

On 30/12/16 02:58, George Politis wrote:


#4

Hi Daniel,

Some inline answers.

Hi Daniel,

Hi, George. Thanks for your reply.

Here’s a few things to try:

1. The JS console/JVB/Jicofo logs could be useful in troubleshooting the issue.

I will check it.

2. What do you see when you go to https://conf.opcion-libre.com.ar/http-bind?

Without the "http-bind" I reach to the page of Jitsi Meet. But with the
"http-bind" I get a 404. The test from the local network, when pointing
to "http-bind", returns "It works! Now point your BOSH client to this
URL to connect to Prosody. For more information see Prosody: Setting up
BOSH”.

You need to configure your proxy to set the HOST header correctly, otherwise Prosody doesn’t know which XMPP domain to use to serve the BOSH request.

3. Make sure you DNAT port 10000 to your LXC container.

Do you mean to 10000/udp? I currently have 10000-20000/udp redirected to
my Asterisk server. I only use Asterisk for audio calls. I thought this
port range was needed for audio with Asterisk. So I can not
simultaneously run Asterisk and Jitsi Meet?

Yes, 10000/udp (and optionally 4443/tcp). Sure you can use Asterisk and JVB simultaneously, you just have to change either the JVB port or the Asterisk port.

I hope this helps.

Regards,
George

···

On Dec 30, 2016, at 8:09 AM, Daniel Bareiro <daniel-listas@gmx.net> wrote:
On 30/12/16 02:58, George Politis wrote:

Thanks for your time.

Kind regards,
Daniel

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev


#5

Hi Daniel,

Some inline answers.

Hi, George. Thanks for your reply.

2. What do you see when you go to https://conf.opcion-libre.com.ar/http-bind?

Without the "http-bind" I reach to the page of Jitsi Meet. But with the
"http-bind" I get a 404. The test from the local network, when pointing
to "http-bind", returns "It works! Now point your BOSH client to this
URL to connect to Prosody. For more information see Prosody: Setting up
BOSH”.

You need to configure your proxy to set the HOST header correctly, otherwise
Prosody doesn’t know which XMPP domain to use to serve the BOSH request.

I added this lines in the Apache configuration:

···

On 31/12/16 02:44, George Politis wrote:

-------------------------------------------------------------------------
<Location /http-bind>
                Order allow,deny
                Allow from all
        </Location>
        RewriteRule ^/http-bind$
http://conference.freesoftware:5280/http-bind [P,L]
-------------------------------------------------------------------------

But I'm still getting a 404.

Here is the complete configuration for the Virtual host:

-------------------------------------------------------------------------
<VirtualHost *:443>
        ServerName conf.opcion-libre.com.ar

        SSLProxyEngine On
        ProxyRequests Off
        ProxyPassReverse / https://conference.freesoftware
        ProxyPreserveHost on

        <Location /http-bind>
                Order allow,deny
                Allow from all
        </Location>
        RewriteRule ^/http-bind$
http://conference.freesoftware:5280/http-bind [P,L]

        SSLProxyCheckPeerCN off
        SSLProxyCheckPeerName off

        RewriteEngine On

        RewriteRule ^/(.*)$ https://conference.freesoftware/$1 [P]

        <Proxy *>
                Order deny,allow
                Allow from all
        </Proxy>

        ErrorLog "|/usr/bin/cronolog
/space/log/ws1/%Y%m/%Y%m%d_conf.opcion-libre.com.ar_error.log"

        LogLevel info

        CustomLog "|/usr/bin/cronolog
/space/log/ws1/%Y%m/%Y%m%d_conf.opcion-libre.com.ar_access.log" combined
        ServerSignature On

        SSLEngine On

        SSLCertificateFile /etc/apache2/ssl/conference.crt
        SSLCertificateKeyFile /etc/apache2/ssl/conference.key

        SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown

        SetEnv force-proxy-request-1.0 1
        SetEnv proxy-nokeepalive 1
</VirtualHost>
-------------------------------------------------------------------------

Do you think I'm missing something?

3. Make sure you DNAT port 10000 to your LXC container.

Do you mean to 10000/udp? I currently have 10000-20000/udp redirected to
my Asterisk server. I only use Asterisk for audio calls. I thought this
port range was needed for audio with Asterisk. So I can not
simultaneously run Asterisk and Jitsi Meet?

Yes, 10000/udp (and optionally 4443/tcp). Sure you can use Asterisk and JVB
simultaneously, you just have to change either the JVB port or the Asterisk port.

I have temporarily redirected the range of ports to the IP of the Jitsi
Meet server for testing:

-------------------------------------------------------------------------
# iptables-save | grep 10.1.0.14
-A ~log5 -j DNAT --to-destination 10.1.0.14
-A net-loc -d 10.1.0.14/32 -p udp -m udp --dport 10000:20000 -j ACCEPT
-------------------------------------------------------------------------

But that does not seem to work. After accepting the use of the
microphone and camera, the screen remains showing the image that I
attached in the screenshot.

I have also found this [1] document. It mentions modifying the
~/.sip-communicator/sip-communicator.properties file in the home
directory of the user running the videobridge, but this file does not exist:

# cat /etc/passwd | grep jvb
jvb:x:999:1000::/usr/share/jitsi-videobridge:/bin/bash

root@conference:/usr/share/jitsi-videobridge# ls -la
total 384
drwxr-xr-x 4 jvb jitsi 4096 dic 29 09:50 .
drwxr-xr-x 72 root root 4096 dic 29 10:22 ..
-rwxr-xr-x 1 jvb jitsi 1980 dic 20 19:21 collect-dump-logs.sh
-rwxr-xr-x 1 jvb jitsi 3021 dic 20 19:21 graceful_shutdown.sh
drwxr-xr-x 3 jvb jitsi 4096 dic 29 09:50 .java
-rw-r--r-- 1 jvb jitsi 359712 dic 20 19:21 jitsi-videobridge.jar
-rwxr-xr-x 1 jvb jitsi 1851 dic 20 19:21 jvb.sh
drwxr-xr-x 3 jvb jitsi 4096 dic 29 09:49 lib

Should I create it?

I take this opportunity to extend to the list my best wishes for the new
year. I hope you start it very well with your loved ones.

Kind regards,
Daniel

[1] https://github.com/jitsi/jitsi-meet/blob/master/doc/manual-install.md


#6

Hi again and happy new year!

···

On 31/12/16 20:37, Daniel Bareiro wrote:

3. Make sure you DNAT port 10000 to your LXC container.

Do you mean to 10000/udp? I currently have 10000-20000/udp redirected to
my Asterisk server. I only use Asterisk for audio calls. I thought this
port range was needed for audio with Asterisk. So I can not
simultaneously run Asterisk and Jitsi Meet?

Yes, 10000/udp (and optionally 4443/tcp). Sure you can use Asterisk and JVB
simultaneously, you just have to change either the JVB port or the Asterisk port.

I have temporarily redirected the range of ports to the IP of the Jitsi
Meet server for testing:

-------------------------------------------------------------------------
# iptables-save | grep 10.1.0.14
-A ~log5 -j DNAT --to-destination 10.1.0.14
-A net-loc -d 10.1.0.14/32 -p udp -m udp --dport 10000:20000 -j ACCEPT
-------------------------------------------------------------------------

But that does not seem to work. After accepting the use of the
microphone and camera, the screen remains showing the image that I
attached in the screenshot.

I have also found this [1] document. It mentions modifying the
~/.sip-communicator/sip-communicator.properties file in the home
directory of the user running the videobridge, but this file does not exist:

# cat /etc/passwd | grep jvb
jvb:x:999:1000::/usr/share/jitsi-videobridge:/bin/bash

root@conference:/usr/share/jitsi-videobridge# ls -la
total 384
drwxr-xr-x 4 jvb jitsi 4096 dic 29 09:50 .
drwxr-xr-x 72 root root 4096 dic 29 10:22 ..
-rwxr-xr-x 1 jvb jitsi 1980 dic 20 19:21 collect-dump-logs.sh
-rwxr-xr-x 1 jvb jitsi 3021 dic 20 19:21 graceful_shutdown.sh
drwxr-xr-x 3 jvb jitsi 4096 dic 29 09:50 .java
-rw-r--r-- 1 jvb jitsi 359712 dic 20 19:21 jitsi-videobridge.jar
-rwxr-xr-x 1 jvb jitsi 1851 dic 20 19:21 jvb.sh
drwxr-xr-x 3 jvb jitsi 4096 dic 29 09:49 lib

Should I create it?

I take this opportunity to extend to the list my best wishes for the new
year. I hope you start it very well with your loved ones.

[1] https://github.com/jitsi/jitsi-meet/blob/master/doc/manual-install.md

I have tried creating this file in the jvb user's home with the
specified content and then I restarted jitsi-videobridge, but still the
camera does not work from Internet :frowning:

I do not see something that seems to be an error in jvb.log:

--------------------------------------------------------------------------------
JVB 2017-01-01 20:42:49.259 INFORMACIÓN: [10]
impl.resources.ResourceManagementActivator.start().81 Resource manager
STARTED
JVB 2017-01-01 20:42:49.263 INFORMACIÓN: [10]
impl.resources.ResourceManagementActivator.start().90 Resource manager
REGISTERED
JVB 2017-01-01 20:42:49.333 INFORMACIÓN: [10]
impl.netaddr.NetworkAddressManagerServiceImpl.start().92 Network Address
Manager ...[] STARTED ]
JVB 2017-01-01 20:42:49.337 INFORMACIÓN: [10]
impl.netaddr.NetworkAddressManagerServiceImpl.start().98 Network Address
Manager Service ...[REGISTERED]
JVB 2017-01-01 20:42:49.377 INFORMACIÓN: [10]
impl.packetlogging.PacketLoggingActivator.start().100 Packet Logging
Service ...[REGISTERED]
JVB 2017-01-01 20:42:50.795 INFORMACIÓN: [14]
org.ice4j.ice.harvest.MappingCandidateHarvesters.initialize()
Initialized mapping harvesters (delay=622ms). stunDiscoveryFailed=false
JVB 2017-01-01 20:42:51.681 INFORMACIÓN: [10]
org.jitsi.impl.neomedia.MediaServiceImpl.log() Warming up SecureRandom...
JVB 2017-01-01 20:42:51.686 INFORMACIÓN: [10]
org.jitsi.impl.neomedia.MediaServiceImpl.log() Warming up SecureRandom
finished.
JVB 2017-01-01 20:42:51.704 INFORMACIÓN: [10]
org.jitsi.version.AbstractVersionActivator.start().119 JVB Version: JVB
0.1.869
JVB 2017-01-01 20:42:52.111 INFORMACIÓN: [18]
org.jitsi.xmpp.component.ComponentBase.loadConfig().200 Component
org.jitsi.videobridge. config:
JVB 2017-01-01 20:42:52.115 INFORMACIÓN: [18]
org.jitsi.xmpp.component.ComponentBase.loadConfig().201 ping interval:
10000 ms
JVB 2017-01-01 20:42:52.117 INFORMACIÓN: [18]
org.jitsi.xmpp.component.ComponentBase.loadConfig().202 ping timeout:
5000 ms
JVB 2017-01-01 20:42:52.118 INFORMACIÓN: [18]
org.jitsi.xmpp.component.ComponentBase.loadConfig().203 ping threshold: 3
JVB 2017-01-01 20:43:02.426 INFORMACIÓN: [24]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-0"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:43:12.141 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-1"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:43:22.141 INFORMACIÓN: [30]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-2"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:43:32.141 INFORMACIÓN: [32]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-3"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:43:42.141 INFORMACIÓN: [36]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-4"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:43:52.141 INFORMACIÓN: [38]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-5"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:02.150 INFORMACIÓN: [40]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-6"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:12.140 INFORMACIÓN: [44]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-7"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:22.141 INFORMACIÓN: [46]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-8"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:32.144 INFORMACIÓN: [48]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-9"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:42.141 INFORMACIÓN: [52]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-10"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:52.141 INFORMACIÓN: [54]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-11"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:02.136 INFORMACIÓN: [56]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-12"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:12.148 INFORMACIÓN: [26]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-13"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:22.145 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-14"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:32.146 INFORMACIÓN: [30]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-15"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:42.140 INFORMACIÓN: [34]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-16"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:52.166 INFORMACIÓN: [36]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-17"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:02.140 INFORMACIÓN: [38]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-18"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:12.139 INFORMACIÓN: [42]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-19"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:22.140 INFORMACIÓN: [44]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-20"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:32.140 INFORMACIÓN: [46]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-21"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:42.139 INFORMACIÓN: [50]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-22"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:52.139 INFORMACIÓN: [52]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-23"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:02.139 INFORMACIÓN: [54]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-24"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:12.143 INFORMACIÓN: [24]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-25"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:22.140 INFORMACIÓN: [26]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-26"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:32.140 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-27"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:32.140 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-27"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:42.139 INFORMACIÓN: [32]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-28"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:52.140 INFORMACIÓN: [34]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-29"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:02.139 INFORMACIÓN: [36]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-30"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:12.139 INFORMACIÓN: [40]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-31"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:22.140 INFORMACIÓN: [42]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-32"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:32.139 INFORMACIÓN: [44]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-33"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:42.151 INFORMACIÓN: [48]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-34"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:52.140 INFORMACIÓN: [50]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-35"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:02.139 INFORMACIÓN: [52]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-36"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:12.139 INFORMACIÓN: [56]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-37"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:22.139 INFORMACIÓN: [24]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-38"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:32.139 INFORMACIÓN: [26]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-39"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:42.140 INFORMACIÓN: [30]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-40"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:52.141 INFORMACIÓN: [32]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-41"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:02.144 INFORMACIÓN: [34]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-42"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:12.146 INFORMACIÓN: [38]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-43"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:22.162 INFORMACIÓN: [40]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-44"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:32.143 INFORMACIÓN: [42]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-45"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:42.144 INFORMACIÓN: [46]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-46"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:52.149 INFORMACIÓN: [48]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-47"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:02.144 INFORMACIÓN: [50]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-48"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:12.145 INFORMACIÓN: [54]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-49"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:22.146 INFORMACIÓN: [56]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-50"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:32.146 INFORMACIÓN: [24]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-51"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:42.146 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-52"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:52.146 INFORMACIÓN: [30]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-53"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:02.153 INFORMACIÓN: [32]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-54"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:12.147 INFORMACIÓN: [36]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-55"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:22.147 INFORMACIÓN: [38]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-56"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:32.156 INFORMACIÓN: [40]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-57"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:42.147 INFORMACIÓN: [44]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-58"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:52.148 INFORMACIÓN: [46]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-59"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:02.148 INFORMACIÓN: [48]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-60"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:12.149 INFORMACIÓN: [52]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-61"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:22.160 INFORMACIÓN: [54]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-62"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:32.150 INFORMACIÓN: [56]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-63"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:42.151 INFORMACIÓN: [26]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-64"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:52.151 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-65"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:54:02.151 INFORMACIÓN: [30]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-66"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
--------------------------------------------------------------------------------

Access from Internet was at 20:45:32.

I would appreciate any guidance you can give me.

Thanks in advance.

Kind regards,
Daniel


#7

Hi,

For reference apache2 config you can look at the template file:
https://github.com/jitsi/jitsi-meet/blob/master/doc/debian/jitsi-meet/jitsi-meet.example-apache
To successfully debug the problem you need to check the logs for
errors starting with the browser. Not seeing your local video
indicates a problem in signaling. It can be that your bosh is not
working correctly or you are not connecting successfully to the xmpp
server.
Pasting errors from the logs here will help figure out the problem,
otherwise we are just guessing what can be the problem.
The manual installation instructions are not recommended and normally
all those stuff is managed by the packages itself and you do not need
to do anything else.

Regards
damencho

···

On Sun, Jan 1, 2017 at 6:17 PM, Daniel Bareiro <daniel-listas@gmx.net> wrote:

Hi again and happy new year!

On 31/12/16 20:37, Daniel Bareiro wrote:

3. Make sure you DNAT port 10000 to your LXC container.

Do you mean to 10000/udp? I currently have 10000-20000/udp redirected to
my Asterisk server. I only use Asterisk for audio calls. I thought this
port range was needed for audio with Asterisk. So I can not
simultaneously run Asterisk and Jitsi Meet?

Yes, 10000/udp (and optionally 4443/tcp). Sure you can use Asterisk and JVB
simultaneously, you just have to change either the JVB port or the Asterisk port.

I have temporarily redirected the range of ports to the IP of the Jitsi
Meet server for testing:

-------------------------------------------------------------------------
# iptables-save | grep 10.1.0.14
-A ~log5 -j DNAT --to-destination 10.1.0.14
-A net-loc -d 10.1.0.14/32 -p udp -m udp --dport 10000:20000 -j ACCEPT
-------------------------------------------------------------------------

But that does not seem to work. After accepting the use of the
microphone and camera, the screen remains showing the image that I
attached in the screenshot.

I have also found this [1] document. It mentions modifying the
~/.sip-communicator/sip-communicator.properties file in the home
directory of the user running the videobridge, but this file does not exist:

# cat /etc/passwd | grep jvb
jvb:x:999:1000::/usr/share/jitsi-videobridge:/bin/bash

root@conference:/usr/share/jitsi-videobridge# ls -la
total 384
drwxr-xr-x 4 jvb jitsi 4096 dic 29 09:50 .
drwxr-xr-x 72 root root 4096 dic 29 10:22 ..
-rwxr-xr-x 1 jvb jitsi 1980 dic 20 19:21 collect-dump-logs.sh
-rwxr-xr-x 1 jvb jitsi 3021 dic 20 19:21 graceful_shutdown.sh
drwxr-xr-x 3 jvb jitsi 4096 dic 29 09:50 .java
-rw-r--r-- 1 jvb jitsi 359712 dic 20 19:21 jitsi-videobridge.jar
-rwxr-xr-x 1 jvb jitsi 1851 dic 20 19:21 jvb.sh
drwxr-xr-x 3 jvb jitsi 4096 dic 29 09:49 lib

Should I create it?

I take this opportunity to extend to the list my best wishes for the new
year. I hope you start it very well with your loved ones.

[1] https://github.com/jitsi/jitsi-meet/blob/master/doc/manual-install.md

I have tried creating this file in the jvb user's home with the
specified content and then I restarted jitsi-videobridge, but still the
camera does not work from Internet :frowning:

I do not see something that seems to be an error in jvb.log:

--------------------------------------------------------------------------------
JVB 2017-01-01 20:42:49.259 INFORMACIÓN: [10]
impl.resources.ResourceManagementActivator.start().81 Resource manager
STARTED
JVB 2017-01-01 20:42:49.263 INFORMACIÓN: [10]
impl.resources.ResourceManagementActivator.start().90 Resource manager
REGISTERED
JVB 2017-01-01 20:42:49.333 INFORMACIÓN: [10]
impl.netaddr.NetworkAddressManagerServiceImpl.start().92 Network Address
Manager ...[] STARTED ]
JVB 2017-01-01 20:42:49.337 INFORMACIÓN: [10]
impl.netaddr.NetworkAddressManagerServiceImpl.start().98 Network Address
Manager Service ...[REGISTERED]
JVB 2017-01-01 20:42:49.377 INFORMACIÓN: [10]
impl.packetlogging.PacketLoggingActivator.start().100 Packet Logging
Service ...[REGISTERED]
JVB 2017-01-01 20:42:50.795 INFORMACIÓN: [14]
org.ice4j.ice.harvest.MappingCandidateHarvesters.initialize()
Initialized mapping harvesters (delay=622ms). stunDiscoveryFailed=false
JVB 2017-01-01 20:42:51.681 INFORMACIÓN: [10]
org.jitsi.impl.neomedia.MediaServiceImpl.log() Warming up SecureRandom...
JVB 2017-01-01 20:42:51.686 INFORMACIÓN: [10]
org.jitsi.impl.neomedia.MediaServiceImpl.log() Warming up SecureRandom
finished.
JVB 2017-01-01 20:42:51.704 INFORMACIÓN: [10]
org.jitsi.version.AbstractVersionActivator.start().119 JVB Version: JVB
0.1.869
JVB 2017-01-01 20:42:52.111 INFORMACIÓN: [18]
org.jitsi.xmpp.component.ComponentBase.loadConfig().200 Component
org.jitsi.videobridge. config:
JVB 2017-01-01 20:42:52.115 INFORMACIÓN: [18]
org.jitsi.xmpp.component.ComponentBase.loadConfig().201 ping interval:
10000 ms
JVB 2017-01-01 20:42:52.117 INFORMACIÓN: [18]
org.jitsi.xmpp.component.ComponentBase.loadConfig().202 ping timeout:
5000 ms
JVB 2017-01-01 20:42:52.118 INFORMACIÓN: [18]
org.jitsi.xmpp.component.ComponentBase.loadConfig().203 ping threshold: 3
JVB 2017-01-01 20:43:02.426 INFORMACIÓN: [24]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-0"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:43:12.141 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-1"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:43:22.141 INFORMACIÓN: [30]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-2"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:43:32.141 INFORMACIÓN: [32]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-3"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:43:42.141 INFORMACIÓN: [36]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-4"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:43:52.141 INFORMACIÓN: [38]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-5"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:02.150 INFORMACIÓN: [40]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-6"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:12.140 INFORMACIÓN: [44]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-7"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:22.141 INFORMACIÓN: [46]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-8"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:32.144 INFORMACIÓN: [48]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-9"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:42.141 INFORMACIÓN: [52]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-10"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:44:52.141 INFORMACIÓN: [54]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-11"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:02.136 INFORMACIÓN: [56]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-12"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:12.148 INFORMACIÓN: [26]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-13"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:22.145 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-14"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:32.146 INFORMACIÓN: [30]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-15"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:42.140 INFORMACIÓN: [34]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-16"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:45:52.166 INFORMACIÓN: [36]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-17"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:02.140 INFORMACIÓN: [38]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-18"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:12.139 INFORMACIÓN: [42]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-19"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:22.140 INFORMACIÓN: [44]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-20"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:32.140 INFORMACIÓN: [46]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-21"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:42.139 INFORMACIÓN: [50]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-22"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:46:52.139 INFORMACIÓN: [52]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-23"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:02.139 INFORMACIÓN: [54]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-24"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:12.143 INFORMACIÓN: [24]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-25"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:22.140 INFORMACIÓN: [26]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-26"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:32.140 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-27"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:32.140 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-27"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:42.139 INFORMACIÓN: [32]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-28"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:47:52.140 INFORMACIÓN: [34]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-29"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:02.139 INFORMACIÓN: [36]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-30"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:12.139 INFORMACIÓN: [40]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-31"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:22.140 INFORMACIÓN: [42]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-32"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:32.139 INFORMACIÓN: [44]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-33"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:42.151 INFORMACIÓN: [48]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-34"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:48:52.140 INFORMACIÓN: [50]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-35"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:02.139 INFORMACIÓN: [52]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-36"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:12.139 INFORMACIÓN: [56]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-37"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:22.139 INFORMACIÓN: [24]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-38"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:32.139 INFORMACIÓN: [26]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-39"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:42.140 INFORMACIÓN: [30]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-40"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:49:52.141 INFORMACIÓN: [32]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-41"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:02.144 INFORMACIÓN: [34]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-42"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:12.146 INFORMACIÓN: [38]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-43"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:22.162 INFORMACIÓN: [40]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-44"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:32.143 INFORMACIÓN: [42]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-45"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:42.144 INFORMACIÓN: [46]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-46"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:50:52.149 INFORMACIÓN: [48]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-47"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:02.144 INFORMACIÓN: [50]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-48"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:12.145 INFORMACIÓN: [54]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-49"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:22.146 INFORMACIÓN: [56]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-50"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:32.146 INFORMACIÓN: [24]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-51"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:42.146 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-52"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:51:52.146 INFORMACIÓN: [30]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-53"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:02.153 INFORMACIÓN: [32]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-54"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:12.147 INFORMACIÓN: [36]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-55"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:22.147 INFORMACIÓN: [38]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-56"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:32.156 INFORMACIÓN: [40]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-57"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:42.147 INFORMACIÓN: [44]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-58"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:52:52.148 INFORMACIÓN: [46]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-59"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:02.148 INFORMACIÓN: [48]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-60"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:12.149 INFORMACIÓN: [52]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-61"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:22.160 INFORMACIÓN: [54]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-62"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:32.150 INFORMACIÓN: [56]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-63"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:42.151 INFORMACIÓN: [26]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-64"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:53:52.151 INFORMACIÓN: [28]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-65"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
JVB 2017-01-01 20:54:02.151 INFORMACIÓN: [30]
org.jitsi.videobridge.xmpp.ComponentImpl.log() RECV: <iq id="Iuk90-66"
type="result" to="jitsi-videobridge.conference.freesoftware"
from="conference.freesoftware"/>
--------------------------------------------------------------------------------

Access from Internet was at 20:45:32.

I would appreciate any guidance you can give me.

Thanks in advance.

Kind regards,
Daniel

_______________________________________________
dev mailing list
dev@jitsi.org
Unsubscribe instructions and other list options:
http://lists.jitsi.org/mailman/listinfo/dev