Guest users get a connection error when entering the room

hi, I installed jitsi application with docker on my own server, I activated login control with jwt token. With the jwt token I created with SECRET_KEY, the host can login, but other users cannot join the room. They get the error I mentioned below.
I think the following error is received because jwt token is expected from guest user
my jitsi version: docker-jitsi-meet-stable-7648-4

my .env file

# shellcheck disable=SC2034

################################################################################
################################################################################
# Welcome to the Jitsi Meet Docker setup!
#
# This sample .env file contains some basic options to get you started.
# The full options reference can be found here:
# https://jitsi.github.io/handbook/docs/devops-guide/devops-guide-docker
################################################################################
################################################################################


#
# Basic configuration options
#

# Directory where all configuration will be stored
CONFIG=~/.jitsi-meet-cfg

# Exposed HTTP port
HTTP_PORT=8000

# Exposed HTTPS port
HTTPS_PORT=8443

# System time zone
TZ=UTC

# Public URL for the web service (required)
PUBLIC_URL=myapp:8443

# IP address of the Docker host
# See the "Running behind NAT or on a LAN environment" section in the Handbook:
# https://jitsi.github.io/handbook/docs/devops-guide/devops-guide-docker#running-behind-nat-or-on-a-lan-environment
DOCKER_HOST_ADDRESS=1.1.1.1.1


#
# JaaS Components (beta)
# https://jaas.8x8.vc
#

# Enable JaaS Components (hosted Jigasi)
#ENABLE_JAAS_COMPONENTS=0

#
# Let's Encrypt configuration
#

# Enable Let's Encrypt certificate generation
#ENABLE_LETSENCRYPT=1

# Domain for which to generate the certificate
#LETSENCRYPT_DOMAIN=meet.example.com

# E-Mail for receiving important account notifications (mandatory)
#LETSENCRYPT_EMAIL=alice@atlanta.net
# Use the staging server (for avoiding rate limits while testing)
#LETSENCRYPT_USE_STAGING=1


#
# Etherpad integration (for document sharing)
#

# Set etherpad-lite URL in docker local network (uncomment to enable)
#ETHERPAD_URL_BASE=http://etherpad.meet.jitsi:9001

# Set etherpad-lite public URL, including /p/ pad path fragment (uncomment to enable)
#ETHERPAD_PUBLIC_URL=https://etherpad.my.domain/p/

# Name your etherpad instance!
ETHERPAD_TITLE=Video Chat

# The default text of a pad
ETHERPAD_DEFAULT_PAD_TEXT="Welcome to Web Chat!\n\n"

# Name of the skin for etherpad
ETHERPAD_SKIN_NAME=colibris

# Skin variants for etherpad
ETHERPAD_SKIN_VARIANTS="super-light-toolbar super-light-editor light-background full-width-editor"


#
# Basic Jigasi configuration options (needed for SIP gateway support)
#

# SIP URI for incoming / outgoing calls
#JIGASI_SIP_URI=test@sip2sip.info

# Password for the specified SIP account as a clear text
#JIGASI_SIP_PASSWORD=passw0rd

# SIP server (use the SIP account domain if in doubt)
#JIGASI_SIP_SERVER=sip2sip.info

# SIP server port
#JIGASI_SIP_PORT=5060

# SIP server transport
#JIGASI_SIP_TRANSPORT=UDP


#
# Authentication configuration (see handbook for details)
#

# Enable authentication
ENABLE_AUTH=1

# Enable guest access
ENABLE_GUESTS=1

# Select authentication type: internal, jwt, ldap or matrix
AUTH_TYPE=jwt

# JWT authentication
#

# Application identifier
JWT_APP_ID=1234

# Application secret known only to your token generator
JWT_APP_SECRET=123

# (Optional) Set asap_accepted_issuers as a comma separated list
#JWT_ACCEPTED_ISSUERS=my_web_client,my_app_client

# (Optional) Set asap_accepted_audiences as a comma separated list
#JWT_ACCEPTED_AUDIENCES=my_server1,my_server2

# LDAP authentication (for more information see the Cyrus SASL saslauthd.conf man page)
#

# LDAP url for connection
#LDAP_URL=ldaps://ldap.domain.com/

# LDAP base DN. Can be empty
#LDAP_BASE=DC=example,DC=domain,DC=com

# LDAP user DN. Do not specify this parameter for the anonymous bind
#LDAP_BINDDN=CN=binduser,OU=users,DC=example,DC=domain,DC=com

# LDAP user password. Do not specify this parameter for the anonymous bind
#LDAP_BINDPW=LdapUserPassw0rd

# LDAP filter. Tokens example:
# %1-9 - if the input key is user@mail.domain.com, then %1 is com, %2 is domain and %3 is mail
# %s - %s is replaced by the complete service string
# %r - %r is replaced by the complete realm string
#LDAP_FILTER=(sAMAccountName=%u)

# LDAP authentication method
#LDAP_AUTH_METHOD=bind

# LDAP version
#LDAP_VERSION=3

# LDAP TLS using
#LDAP_USE_TLS=1


# List of SSL/TLS ciphers to allow
#LDAP_TLS_CIPHERS=SECURE256:SECURE128:!AES-128-CBC:!ARCFOUR-128:!CAMELLIA-128-CBC:!3DES-CBC:!CAMELLIA-128-CBC

# Require and verify server certificate
#LDAP_TLS_CHECK_PEER=1

# Path to CA cert file. Used when server certificate verify is enabled
#LDAP_TLS_CACERT_FILE=/etc/ssl/certs/ca-certificates.crt

# Path to CA certs directory. Used when server certificate verify is enabled
#LDAP_TLS_CACERT_DIR=/etc/ssl/certs

# Wether to use starttls, implies LDAPv3 and requires ldap:// instead of ldaps://
# LDAP_START_TLS=1


#
# Security
#
# Set these to strong passwords to avoid intruders from impersonating a service account
# The service(s) won't start unless these are specified
# Running ./gen-passwords.sh will update .env with strong passwords
# You may skip the Jigasi and Jibri passwords if you are not using those
# DO NOT reuse passwords
#

# XMPP password for Jicofo client connections
JICOFO_AUTH_PASSWORD=da0f56763075ec30c621a371750e4b1f

# XMPP password for JVB client connections
JVB_AUTH_PASSWORD=00a3a6c1e9bde853efdf53aa65dec5d0

# XMPP password for Jigasi MUC client connections
JIGASI_XMPP_PASSWORD=cf097739c55803701470d0ae5af21559

# XMPP recorder password for Jibri client connections
JIBRI_RECORDER_PASSWORD=2e07d86f9ff95c994e3819f8ee4ef056

# XMPP password for Jibri client connections
JIBRI_XMPP_PASSWORD=f965f8efb06b02ff14577c7cf327a2d1

#
# Docker Compose options
#

# Container restart policy
#RESTART_POLICY=unless-stopped

# Jitsi image version (useful for local development)
#JITSI_IMAGE_VERSION=latest
 


The part where I make changes on the docker compose yml. I just changed the ports because those ports are already in use

    # Video bridge
    jvb:
        image: jitsi/jvb:${JITSI_IMAGE_VERSION:-stable-7648-4}
        restart: ${RESTART_POLICY:-unless-stopped}
        ports:
            - '${JVB_PORT:-10003}:${JVB_PORT:-10003}/udp'
            - '127.0.0.1:${JVB_COLIBRI_PORT:-8083}:8083'
        volumes:
            - ${CONFIG}/jvb:/config:Z
        environment:
            - DOCKER_HOST_ADDRESS
            - ENABLE_COLIBRI_WEBSOCKET
            - ENABLE_OCTO
            - ENABLE_MULTI_STREAM
            - JVB_ADVERTISE_PRIVATE_CANDIDATES
            - JVB_AUTH_USER
            - JVB_AUTH_PASSWORD
            - JVB_BREWERY_MUC
            - JVB_DISABLE_STUN
            - JVB_PORT
            - JVB_MUC_NICKNAME
            - JVB_STUN_SERVERS
            - JVB_OCTO_BIND_ADDRESS
            - JVB_OCTO_PUBLIC_ADDRESS
            - JVB_OCTO_BIND_PORT
            - JVB_OCTO_REGION
            - JVB_WS_DOMAIN
            - JVB_WS_SERVER_ID
            - PUBLIC_URL
            - SENTRY_DSN="${JVB_SENTRY_DSN:-0}"
            - SENTRY_ENVIRONMENT
            - SENTRY_RELEASE
            - COLIBRI_REST_ENABLED
            - SHUTDOWN_REST_ENABLED
            - TZ
            - XMPP_AUTH_DOMAIN
            - XMPP_INTERNAL_MUC_DOMAIN
            - XMPP_SERVER
            - XMPP_PORT
        depends_on:
            - prosody
        networks:
            meet.jitsi:```

Try setting JWT_ALLOW_EMPTY to 1.