Hi, I have installed the Jitsimeet by following the manual installation doc, which is working like a charm.
Recently, I tried to use secure domains and enable JWT tokens. However, I can pass profile picture, name in the JWT token and it works. But, the problem is that, I am unable to disable guest access to rooms. I want all the users to have a token. In my current installation, anybody can join any room even without the token.
prosody general config /etc/prosody/prosody.cfg.lua :-
-- Prosody XMPP Server Configuration
--
-- Information on configuring Prosody can be found on our
-- website at https://prosody.im/doc/configure
--
-- Tip: You can check that the syntax of this file is correct
-- when you have finished by running this command:
-- prosodyctl check config
-- If there are any errors, it will let you know what and where
-- they are, otherwise it will keep quiet.
--
-- Good luck, and happy Jabbering!
---------- Server-wide settings ----------
-- Settings in this section apply to the whole server and are the default settings
-- for any virtual hosts
-- This is a (by default, empty) list of accounts that are admins
-- for the server. Note that you must create the accounts separately
-- (see https://prosody.im/doc/creating_accounts for info)
-- Example: admins = { "user1@example.com", "user2@example.net" }
admins = { }
component_ports = { 5347 }
component_interface = "0.0.0.0"
-- Enable use of libevent for better performance under high load
-- For more information see: https://prosody.im/doc/libevent
--use_libevent = true
-- Prosody will always look in its source directory for modules, but
-- this option allows you to specify additional locations where Prosody
-- will look for modules first. For community modules, see https://modules.prosody.im/
--plugin_paths = {}
-- This is the list of modules Prosody will load on startup.
-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
-- Documentation for bundled modules can be found at: https://prosody.im/doc/modules
modules_enabled = {
-- Generally required
"roster"; -- Allow users to have a roster. Recommended ;)
"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
"tls"; -- Add support for secure TLS on c2s/s2s connections
"dialback"; -- s2s dialback support
"disco"; -- Service discovery
-- Not essential, but recommended
"carbons"; -- Keep multiple clients in sync
"pep"; -- Enables users to publish their avatar, mood, activity, playing music and more
"private"; -- Private XML storage (for room bookmarks, etc.)
"blocklist"; -- Allow users to block communications with other users
"vcard4"; -- User profiles (stored in PEP)
"vcard_legacy"; -- Conversion between legacy vCard and PEP Avatar, vcard
-- Nice to have
"version"; -- Replies to server version requests
"uptime"; -- Report how long server has been running
"time"; -- Let others know the time here on this server
"ping"; -- Replies to XMPP pings with pongs
"register"; -- Allow users to register on this server using a client and change passwords
--"mam"; -- Store messages in an archive and allow users to access it
--"csi_simple"; -- Simple Mobile optimizations
-- Admin interfaces
"admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands
--"admin_telnet"; -- Opens telnet console interface on localhost port 5582
-- HTTP modules
--"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
--"websocket"; -- XMPP over WebSockets
--"http_files"; -- Serve static files from a directory over HTTP
-- Other specific functionality
--"limits"; -- Enable bandwidth limiting for XMPP connections
--"groups"; -- Shared roster support
--"server_contact_info"; -- Publish contact information for this service
--"announce"; -- Send announcement to all online users
--"welcome"; -- Welcome users who register accounts
--"watchregistrations"; -- Alert admins of registrations
--"motd"; -- Send a message to users when they log in
--"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
--"proxy65"; -- Enables a file transfer proxy service which clients behind NAT can use
}
-- These modules are auto-loaded, but should you want
-- to disable them then uncomment them here:
modules_disabled = {
-- "offline"; -- Store offline messages
-- "c2s"; -- Handle client connections
-- "s2s"; -- Handle server-to-server connections
-- "posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
}
-- Disable account creation by default, for security
-- For more information see https://prosody.im/doc/creating_accounts
allow_registration = false
-- Force clients to use encrypted connections? This option will
-- prevent clients from authenticating unless they are using encryption.
c2s_require_encryption = false
-- Force servers to use encrypted connections? This option will
-- prevent servers from authenticating unless they are using encryption.
s2s_require_encryption = true
-- Force certificate authentication for server-to-server connections?
s2s_secure_auth = false
-- Some servers have invalid or self-signed certificates. You can list
-- remote domains here that will not be required to authenticate using
-- certificates. They will be authenticated using DNS instead, even
-- when s2s_secure_auth is enabled.
--s2s_insecure_domains = { "insecure.example" }
-- Even if you disable s2s_secure_auth, you can still require valid
-- certificates for some domains by specifying a list here.
--s2s_secure_domains = { "jabber.org" }
-- Required for init scripts and prosodyctl
pidfile = "/var/run/prosody/prosody.pid"
-- Select the authentication backend to use. The 'internal' providers
-- use Prosody's configured data storage to store the authentication data.
authentication = "internal_hashed"
-- Select the storage backend to use. By default Prosody uses flat files
-- in its configured data directory, but it also supports more backends
-- through modules. An "sql" backend is included by default, but requires
-- additional dependencies. See https://prosody.im/doc/storage for more info.
--storage = "sql" -- Default is "internal"
-- For the "sql" backend, you can uncomment *one* of the below to configure:
--sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename.
--sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
--sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
-- Archiving configuration
-- If mod_mam is enabled, Prosody will store a copy of every message. This
-- is used to synchronize conversations between multiple clients, even if
-- they are offline. This setting controls how long Prosody will keep
-- messages in the archive before removing them.
archive_expires_after = "1w" -- Remove archived messages after 1 week
-- You can also configure messages to be stored in-memory only. For more
-- archiving options, see https://prosody.im/doc/modules/mod_mam
-- Logging configuration
-- For advanced logging see https://prosody.im/doc/logging
log = {
info = "/var/log/prosody/prosody.log"; -- Change 'info' to 'debug' for verbose logging
error = "/var/log/prosody/prosody.err";
-- "*syslog"; -- Uncomment this for logging to syslog
-- "*console"; -- Log to the console, useful for debugging with daemonize=false
}
-- Uncomment to enable statistics
-- For more info see https://prosody.im/doc/statistics
-- statistics = "internal"
-- Certificates
-- Every virtual host and component needs a certificate so that clients and
-- servers can securely verify its identity. Prosody will automatically load
-- certificates/keys from the directory specified here.
-- For more information, including how to use 'prosodyctl' to auto-import certificates
-- (from e.g. Let's Encrypt) see https://prosody.im/doc/certificates
-- Location of directory to find certificates in (relative to main config file):
certificates = "certs"
-- HTTPS currently only supports a single certificate, specify it here:
--https_certificate = "/etc/prosody/certs/localhost.crt"
----------- Virtual hosts -----------
-- You need to add a VirtualHost entry for each domain you wish Prosody to serve.
-- Settings under each VirtualHost entry apply *only* to that host.
VirtualHost "localhost"
--VirtualHost "example.com"
-- certificate = "/path/to/example.crt"
------ Components ------
-- You can specify components to add hosts that provide special services,
-- like multi-user conferences, and transports.
-- For more information on components, see https://prosody.im/doc/components
---Set up a MUC (multi-user chat) room server on conference.example.com:
--Component "conference.example.com" "muc"
--- Store MUC messages in an archive and allow users to access it
--modules_enabled = { "muc_mam" }
---Set up an external component (default component port is 5347)
--
-- External components allow adding various services, such as gateways/
-- transports to other networks like ICQ, MSN and Yahoo. For more info
-- see: https://prosody.im/doc/components#adding_an_external_component
--
--Component "gateway.example.com"
-- component_secret = "password"
Include "conf.d/*.cfg.lua"
Prosody domain config /etc/prosody/conf.avail/example.cfg.lua
asap_accepted_issuers = { "jitsi", "smash" }
asap_accepted_audiences = { "jitsi", "smash" }
VirtualHost "example.com"
authentication = "token";
app_id = "<app_id>"; -- application identifier
app_secret = "<secret>"; -- application secret known only to your token
ssl = {
key = "/var/lib/prosody/example.com.key";
certificate = "/var/lib/prosody/example.com.crt";
}
modules_enabled = {
"bosh";
"pubsub";
"presence_identity";
}
c2s_require_encryption = false
VirtualHost "auth.example.com"
ssl = {
key = "/var/lib/prosody/auth.example.com.key";
certificate = "/var/lib/prosody/auth.example.com.crt";
}
authentication = "internal_plain"
admins = { "focus@auth.example.com" }
Component "conference.example.com" "muc"
modules_enabled = { "token_verification" }
Component "jitsi-videobridge.example.com"
component_secret = "SECRET1"
Component "focus.example.com"
component_secret = "SECRET2"
Jitsimeet config file, config.js :-
/* eslint-disable no-unused-vars, no-var */
var config = {
// Connection
//
hosts: {
// XMPP domain.
domain: 'example.com',
// When using authentication, domain for guest users.
// anonymousdomain: 'guest.example.com',
// Domain for authenticated users. Defaults to <domain>.
// authdomain: 'jitsi-meet.example.com',
// Jirecon recording component domain.
// jirecon: 'jirecon.jitsi-meet.example.com',
// Call control component (Jigasi).
// call_control: 'callcontrol.jitsi-meet.example.com',
// Focus component domain. Defaults to focus.<domain>.
// focus: 'focus.jitsi-meet.example.com',
// XMPP MUC domain. FIXME: use XEP-0030 to discover it.
muc: 'conference.example.com'
},
// BOSH URL. FIXME: use XEP-0156 to discover it.
bosh: '//example.com/http-bind',
// Websocket URL
// websocket: 'wss://jitsi-meet.example.com/xmpp-websocket',
// The name of client node advertised in XEP-0115 'c' stanza
clientNode: 'http://jitsi.org/jitsimeet',
// The real JID of focus participant - can be overridden here
// focusUserJid: 'focus@auth.jitsi-meet.example.com',
// Testing / experimental features.
//
testing: {
// P2P test mode disables automatic switching to P2P when there are 2
// participants in the conference.
p2pTestMode: false
// Enables the test specific features consumed by jitsi-meet-torture
// testMode: false
// Disables the auto-play behavior of *all* newly created video element.
// This is useful when the client runs on a host with limited resources.
// noAutoPlayVideo: false
},
// Disables ICE/UDP by filtering out local and remote UDP candidates in
// signalling.
// webrtcIceUdpDisable: false,
// Disables ICE/TCP by filtering out local and remote TCP candidates in
// signalling.
// webrtcIceTcpDisable: false,
// Media
//
// Audio
// Disable measuring of audio levels.
// disableAudioLevels: false,
// audioLevelsInterval: 200,
// Enabling this will run the lib-jitsi-meet no audio detection module which
// will notify the user if the current selected microphone has no audio
// input and will suggest another valid device if one is present.
enableNoAudioDetection: true,
// Enabling this will run the lib-jitsi-meet noise detection module which will
// notify the user if there is noise, other than voice, coming from the current
// selected microphone. The purpose it to let the user know that the input could
// be potentially unpleasant for other meeting participants.
enableNoisyMicDetection: true,
// Start the conference in audio only mode (no video is being received nor
// sent).
// startAudioOnly: false,
// Every participant after the Nth will start audio muted.
// startAudioMuted: 10,
// Start calls with audio muted. Unlike the option above, this one is only
// applied locally. FIXME: having these 2 options is confusing.
// startWithAudioMuted: false,
// Enabling it (with #params) will disable local audio output of remote
// participants and to enable it back a reload is needed.
// startSilent: false
// Video
// Sets the preferred resolution (height) for local video. Defaults to 720.
// resolution: 720,
// w3c spec-compliant video constraints to use for video capture. Currently
// used by browsers that return true from lib-jitsi-meet's
// util#browser#usesNewGumFlow. The constraints are independent from
// this config's resolution value. Defaults to requesting an ideal
// resolution of 720p.
// constraints: {
// video: {
// height: {
// ideal: 720,
// max: 720,
// min: 240
// }
// }
// },
// Enable / disable simulcast support.
// disableSimulcast: false,
// Enable / disable layer suspension. If enabled, endpoints whose HD
// layers are not in use will be suspended (no longer sent) until they
// are requested again.
// enableLayerSuspension: false,
// Every participant after the Nth will start video muted.
// startVideoMuted: 10,
// Start calls with video muted. Unlike the option above, this one is only
// applied locally. FIXME: having these 2 options is confusing.
// startWithVideoMuted: false,
// If set to true, prefer to use the H.264 video codec (if supported).
// Note that it's not recommended to do this because simulcast is not
// supported when using H.264. For 1-to-1 calls this setting is enabled by
// default and can be toggled in the p2p section.
// preferH264: true,
// If set to true, disable H.264 video codec by stripping it out of the
// SDP.
// disableH264: false,
// Desktop sharing
// The ID of the jidesha extension for Chrome.
desktopSharingChromeExtId: null,
// Whether desktop sharing should be disabled on Chrome.
// desktopSharingChromeDisabled: false,
// The media sources to use when using screen sharing with the Chrome
// extension.
desktopSharingChromeSources: [ 'screen', 'window', 'tab' ],
// Required version of Chrome extension
desktopSharingChromeMinExtVersion: '0.1',
// Whether desktop sharing should be disabled on Firefox.
// desktopSharingFirefoxDisabled: false,
// Optional desktop sharing frame rate options. Default value: min:5, max:5.
// desktopSharingFrameRate: {
// min: 5,
// max: 5
// },
// Try to start calls with screen-sharing instead of camera video.
// startScreenSharing: false,
// Recording
// Whether to enable file recording or not.
// fileRecordingsEnabled: false,
// Enable the dropbox integration.
// dropbox: {
// appKey: '<APP_KEY>' // Specify your app key here.
// // A URL to redirect the user to, after authenticating
// // by default uses:
// // 'https://jitsi-meet.example.com/static/oauth.html'
// redirectURI:
// 'https://jitsi-meet.example.com/subfolder/static/oauth.html'
// },
// When integrations like dropbox are enabled only that will be shown,
// by enabling fileRecordingsServiceEnabled, we show both the integrations
// and the generic recording service (its configuration and storage type
// depends on jibri configuration)
// fileRecordingsServiceEnabled: false,
// Whether to show the possibility to share file recording with other people
// (e.g. meeting participants), based on the actual implementation
// on the backend.
// fileRecordingsServiceSharingEnabled: false,
// Whether to enable live streaming or not.
// liveStreamingEnabled: false,
// Transcription (in interface_config,
// subtitles and buttons can be configured)
// transcribingEnabled: false,
// Enables automatic turning on captions when recording is started
// autoCaptionOnRecord: false,
// Misc
// Default value for the channel "last N" attribute. -1 for unlimited.
channelLastN: -1,
// Disables or enables RTX (RFC 4588) (defaults to false).
// disableRtx: false,
// Disables or enables TCC (the default is in Jicofo and set to true)
// (draft-holmer-rmcat-transport-wide-cc-extensions-01). This setting
// affects congestion control, it practically enables send-side bandwidth
// estimations.
// enableTcc: true,
// Disables or enables REMB (the default is in Jicofo and set to false)
// (draft-alvestrand-rmcat-remb-03). This setting affects congestion
// control, it practically enables recv-side bandwidth estimations. When
// both TCC and REMB are enabled, TCC takes precedence. When both are
// disabled, then bandwidth estimations are disabled.
// enableRemb: false,
// Defines the minimum number of participants to start a call (the default
// is set in Jicofo and set to 2).
// minParticipants: 2,
// Use XEP-0215 to fetch STUN and TURN servers.
// useStunTurn: true,
// Enable IPv6 support.
// useIPv6: true,
// Enables / disables a data communication channel with the Videobridge.
// Values can be 'datachannel', 'websocket', true (treat it as
// 'datachannel'), undefined (treat it as 'datachannel') and false (don't
// open any channel).
// openBridgeChannel: true,
// UI
//
// Use display name as XMPP nickname.
// useNicks: false,
// Require users to always specify a display name.
// requireDisplayName: true,
// Whether to use a welcome page or not. In case it's false a random room
// will be joined when no room is specified.
enableWelcomePage: true,
// Enabling the close page will ignore the welcome page redirection when
// a call is hangup.
// enableClosePage: false,
// Disable hiding of remote thumbnails when in a 1-on-1 conference call.
// disable1On1Mode: false,
// Default language for the user interface.
// defaultLanguage: 'en',
// If true all users without a token will be considered guests and all users
// with token will be considered non-guests. Only guests will be allowed to
// edit their profile.
enableUserRolesBasedOnToken: false,
// Whether or not some features are checked based on token.
// enableFeaturesBasedOnToken: false,
// Enable lock room for all moderators, even when userRolesBasedOnToken is enabled and participants are guests.
// lockRoomGuestEnabled: false,
// When enabled the password used for locking a room is restricted to up to the number of digits specified
// roomPasswordNumberOfDigits: 10,
// default: roomPasswordNumberOfDigits: false,
// Message to show the users. Example: 'The service will be down for
// maintenance at 01:00 AM GMT,
// noticeMessage: '',
// Enables calendar integration, depends on googleApiApplicationClientID
// and microsoftApiApplicationClientID
// enableCalendarIntegration: false,
// Stats
//
// Whether to enable stats collection or not in the TraceablePeerConnection.
// This can be useful for debugging purposes (post-processing/analysis of
// the webrtc stats) as it is done in the jitsi-meet-torture bandwidth
// estimation tests.
// gatherStats: false,
// The interval at which PeerConnection.getStats() is called. Defaults to 10000
// pcStatsInterval: 10000,
// To enable sending statistics to callstats.io you must provide the
// Application ID and Secret.
// callStatsID: '',
// callStatsSecret: '',
// enables sending participants display name to callstats
// enableDisplayNameInStats: false,
// enables sending participants email if available to callstats and other analytics
// enableEmailInStats: false,
// Privacy
//
// If third party requests are disabled, no other server will be contacted.
// This means avatars will be locally generated and callstats integration
// will not function.
// disableThirdPartyRequests: false,
// Peer-To-Peer mode: used (if enabled) when there are just 2 participants.
//
p2p: {
// Enables peer to peer mode. When enabled the system will try to
// establish a direct connection when there are exactly 2 participants
// in the room. If that succeeds the conference will stop sending data
// through the JVB and use the peer to peer connection instead. When a
// 3rd participant joins the conference will be moved back to the JVB
// connection.
enabled: true,
// Use XEP-0215 to fetch STUN and TURN servers.
// useStunTurn: true,
// The STUN servers that will be used in the peer to peer connections
stunServers: [
// { urls: 'stun:jitsi-meet.example.com:4446' },
{ urls: 'stun:meet-jit-si-turnrelay.jitsi.net:443' }
],
// Sets the ICE transport policy for the p2p connection. At the time
// of this writing the list of possible values are 'all' and 'relay',
// but that is subject to change in the future. The enum is defined in
// the WebRTC standard:
// https://www.w3.org/TR/webrtc/#rtcicetransportpolicy-enum.
// If not set, the effective value is 'all'.
// iceTransportPolicy: 'all',
// If set to true, it will prefer to use H.264 for P2P calls (if H.264
// is supported).
preferH264: true
// If set to true, disable H.264 video codec by stripping it out of the
// SDP.
// disableH264: false,
// How long we're going to wait, before going back to P2P after the 3rd
// participant has left the conference (to filter out page reload).
// backToP2PDelay: 5
},
analytics: {
// The Google Analytics Tracking ID:
// googleAnalyticsTrackingId: 'your-tracking-id-UA-123456-1'
// The Amplitude APP Key:
// amplitudeAPPKey: '<APP_KEY>'
// Array of script URLs to load as lib-jitsi-meet "analytics handlers".
// scriptURLs: [
// "libs/analytics-ga.min.js", // google-analytics
// "https://example.com/my-custom-analytics.js"
// ],
},
// Information about the jitsi-meet instance we are connecting to, including
// the user region as seen by the server.
deploymentInfo: {
// shard: "shard1",
// region: "europe",
// userRegion: "asia"
},
// Decides whether the start/stop recording audio notifications should play on record.
// disableRecordAudioNotification: false,
// Information for the chrome extension banner
// chromeExtensionBanner: {
// // The chrome extension to be installed address
// url: 'https://chrome.google.com/webstore/detail/jitsi-meetings/kglhbbefdnlheedjiejgomgmfplipfeb',
// // Extensions info which allows checking if they are installed or not
// chromeExtensionsInfo: [
// {
// id: 'kglhbbefdnlheedjiejgomgmfplipfeb',
// path: 'jitsi-logo-48x48.png'
// }
// ]
// },
// Local Recording
//
// localRecording: {
// Enables local recording.
// Additionally, 'localrecording' (all lowercase) needs to be added to
// TOOLBAR_BUTTONS in interface_config.js for the Local Recording
// button to show up on the toolbar.
//
// enabled: true,
//
// The recording format, can be one of 'ogg', 'flac' or 'wav'.
// format: 'flac'
//
// },
// Options related to end-to-end (participant to participant) ping.
// e2eping: {
// // The interval in milliseconds at which pings will be sent.
// // Defaults to 10000, set to <= 0 to disable.
// pingInterval: 10000,
//
// // The interval in milliseconds at which analytics events
// // with the measured RTT will be sent. Defaults to 60000, set
// // to <= 0 to disable.
// analyticsInterval: 60000,
// },
// If set, will attempt to use the provided video input device label when
// triggering a screenshare, instead of proceeding through the normal flow
// for obtaining a desktop stream.
// NOTE: This option is experimental and is currently intended for internal
// use only.
// _desktopSharingSourceDevice: 'sample-id-or-label',
// If true, any checks to handoff to another application will be prevented
// and instead the app will continue to display in the current browser.
// disableDeepLinking: false,
// A property to disable the right click context menu for localVideo
// the menu has option to flip the locally seen video for local presentations
// disableLocalVideoFlip: false,
// Mainly privacy related settings
// Disables all invite functions from the app (share, invite, dial out...etc)
// disableInviteFunctions: true,
// Disables storing the room name to the recents list
// doNotStoreRoom: true,
// Deployment specific URLs.
// deploymentUrls: {
// // If specified a 'Help' button will be displayed in the overflow menu with a link to the specified URL for
// // user documentation.
// userDocumentationURL: 'https://docs.example.com/video-meetings.html',
// // If specified a 'Download our apps' button will be displayed in the overflow menu with a link
// // to the specified URL for an app download page.
// downloadAppsUrl: 'https://docs.example.com/our-apps.html'
// },
// Options related to the remote participant menu.
// remoteVideoMenu: {
// // If set to true the 'Kick out' button will be disabled.
// disableKick: true
// },
// If set to true all muting operations of remote participants will be disabled.
// disableRemoteMute: true,
// List of undocumented settings used in jitsi-meet
/**
_immediateReloadThreshold
autoRecord
autoRecordToken
debug
debugAudioLevels
deploymentInfo
dialInConfCodeUrl
dialInNumbersUrl
dialOutAuthUrl
dialOutCodesUrl
disableRemoteControl
displayJids
etherpad_base
externalConnectUrl
firefox_fake_device
googleApiApplicationClientID
iAmRecorder
iAmSipGateway
microsoftApiApplicationClientID
peopleSearchQueryTypes
peopleSearchUrl
requireDisplayName
tokenAuthUrl
*/
// List of undocumented settings used in lib-jitsi-meet
/**
_peerConnStatusOutOfLastNTimeout
_peerConnStatusRtcMuteTimeout
abTesting
avgRtpStatsN
callStatsConfIDNamespace
callStatsCustomScriptUrl
desktopSharingSources
disableAEC
disableAGC
disableAP
disableHPF
disableNS
enableLipSync
enableTalkWhileMuted
forceJVB121Ratio
hiddenDomain
ignoreStartMuted
nick
startBitrate
*/
// Allow all above example options to include a trailing comma and
// prevent fear when commenting out the last value.
makeJsonParserHappy: 'even if last key had a trailing comma'
// no configuration value should follow this line.
};
/* eslint-enable no-unused-vars, no-var */